[PATCH] s390 (19/19): remove outdated code.
From: Martin Schwidefsky
Date: Thu Sep 25 2003 - 12:34:59 EST
Remove outdated ipl records from arch/s390/boot. They are now part of
the s390-tools package.
diffstat:
arch/s390/boot/ipldump.S | 178 ---------------------------
arch/s390/boot/ipleckd.S | 303 -----------------------------------------------
arch/s390/boot/iplfba.S | 131 --------------------
3 files changed, 612 deletions(-)
diff -urN linux-2.6/arch/s390/boot/ipldump.S linux-2.6-s390/arch/s390/boot/ipldump.S
--- linux-2.6/arch/s390/boot/ipldump.S Mon Sep 8 21:49:51 2003
+++ linux-2.6-s390/arch/s390/boot/ipldump.S Thu Jan 1 01:00:00 1970
@@ -1,178 +0,0 @@
-/*
- * arch/s390/boot/ipldump.S
- *
- * S390 version
- * Copyright (C) 2000 IBM Deutschland Entwicklung GmbH, IBM Corporation
- * Author(s): Martin Schwidefsky (schwidefsky@xxxxxxxxxx),
- *
- * Tape dump ipl record. Put it on a tape and ipl from it and it will
- * write a dump of the real storage after the ipl record on that tape.
- */
-
-#include <asm/setup.h>
-#include <asm/lowcore.h>
-
-#define IPL_BS 1024
- .org 0
- .long 0x00080000,0x80000000+_start # The first 24 bytes are loaded
- .long 0x07000000,0x60000001 # by ipl to addresses 0-23.
- .long 0x02000000,0x20000000+IPL_BS # (a PSW and two CCWs).
- .long 0x00000000,0x00000000
- .long 0x00000000,0x00000000 # svc old psw
- .long 0x00000000,0x00000000 # program check old psw
- .long 0x00000000,0x00000000 # machine check old psw
- .long 0x00000000,0x00000000 # io old psw
- .long 0x00000000,0x00000000
- .long 0x00000000,0x00000000
- .long 0x00000000,0x00000000
- .long 0x000a0000,0x00000058 # external new psw
- .long 0x000a0000,0x00000060 # svc new psw
- .long 0x000a0000,0x00000068 # program check new psw
- .long 0x000a0000,0x00000070 # machine check new psw
- .long 0x00080000,0x80000000+.Lioint # io new psw
-
- .org 0x100
- .globl _start
-_start:
- l %r1,0xb8 # load ipl subchannel number
-#
-# find out memory size
-#
- mvc 104(8),.Lpcmem0 # setup program check handler
- slr %r3,%r3
- lhi %r2,1
- sll %r2,20
-.Lloop0:
- l %r0,0(%r3) # test page
- ar %r3,%r2 # add 1M
- jnm .Lloop0 # r1 < 0x80000000 -> loop
-.Lchkmem0:
- n %r3,.L4malign0 # align to multiples of 4M
- st %r3,.Lmemsize # store memory size
-.Lmemok:
-
-#
-# first write a tape mark
-#
- bras %r14,.Ltapemark
-#
-# write real storage to tape
-#
- slr %r2,%r2 # start at address 0
- bras %r14,.Lwriter # load ramdisk
-#
-# write another tape mark
-#
- bras %r14,.Ltapemark
-#
-# everything written, stop processor
-#
- lpsw .Lstopped
-#
-# subroutine for writing to tape
-# Paramters:
-# R1 = device number
-# R2 = start address
-# R3 = length
-.Lwriter:
- st %r14,.Lldret
- la %r12,.Lorbread # r12 = address of orb
- la %r5,.Lirb # r5 = address of irb
- st %r2,.Lccwwrite+4 # initialize CCW data addresses
- lctl %c6,%c6,.Lcr6
- slr %r2,%r2
-.Lldlp:
- lhi %r6,3 # 3 retries
-.Lssch:
- ssch 0(%r12) # write chunk of IPL_BS bytes
- jnz .Llderr
-.Lw4end:
- bras %r14,.Lwait4io
- tm 8(%r5),0x82 # do we have a problem ?
- jnz .Lrecov
- l %r0,.Lccwwrite+4 # update CCW data addresses
- ahi %r0,IPL_BS
- st %r0,.Lccwwrite+4
- clr %r0,%r3 # enough ?
- jl .Lldlp
-.Ldone:
- l %r14,.Lldret
- br %r14 # r2 contains the total size
-.Lrecov:
- bras %r14,.Lsense # do the sensing
- brct %r6,.Lssch # dec. retry count & branch
- j .Llderr
-.Ltapemark:
- st %r14,.Lldret
- la %r12,.Lorbmark # r12 = address of orb
- la %r5,.Lirb # r5 = address of irb
- lctl %c6,%c6,.Lcr6
- ssch 0(%r12) # write a tape mark
- jnz .Llderr
- bras %r14,.Lwait4io
- l %r14,.Lldret
- br %r14
-#
-# Sense subroutine
-#
-.Lsense:
- st %r14,.Lsnsret
- la %r7,.Lorbsense
- ssch 0(%r7) # start sense command
- jnz .Llderr
- bras %r14,.Lwait4io
- l %r14,.Lsnsret
- tm 8(%r5),0x82 # do we have a problem ?
- jnz .Llderr
- br %r14
-#
-# Wait for interrupt subroutine
-#
-.Lwait4io:
- lpsw .Lwaitpsw
-.Lioint:
- c %r1,0xb8 # compare subchannel number
- jne .Lwait4io
- tsch 0(%r5)
- slr %r0,%r0
- tm 8(%r5),0x82 # do we have a problem ?
- jnz .Lwtexit
- tm 8(%r5),0x04 # got device end ?
- jz .Lwait4io
-.Lwtexit:
- br %r14
-.Llderr:
- lpsw .Lcrash
-
- .align 8
-.Lorbread:
- .long 0x00000000,0x0080ff00,.Lccwwrite
- .align 8
-.Lorbsense:
- .long 0x00000000,0x0080ff00,.Lccwsense
- .align 8
-.Lorbmark:
- .long 0x00000000,0x0080ff00,.Lccwmark
- .align 8
-.Lccwwrite:
- .long 0x01200000+IPL_BS,0x00000000
-.Lccwsense:
- .long 0x04200001,0x00000000
-.Lccwmark:
- .long 0x1f200001,0x00000000
-.Lwaitpsw:
- .long 0x020a0000,0x80000000+.Lioint
-
-.Lirb: .long 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
-.Lcr6: .long 0xff000000
- .align 8
-.Lcrash:.long 0x000a0000,0x00000000
-.Lstopped: .long 0x000a0000,0x00001234
-.Lpcmem0:.long 0x00080000,0x80000000 + .Lchkmem0
-.L4malign0:.long 0xffc00000
-.Lmemsize:.long 0
-.Lldret:.long 0
-.Lsnsret: .long 0
-
- .org IPL_BS
-
diff -urN linux-2.6/arch/s390/boot/ipleckd.S linux-2.6-s390/arch/s390/boot/ipleckd.S
--- linux-2.6/arch/s390/boot/ipleckd.S Mon Sep 8 21:50:01 2003
+++ linux-2.6-s390/arch/s390/boot/ipleckd.S Thu Jan 1 01:00:00 1970
@@ -1,303 +0,0 @@
-#
-# arch/s390/boot/ipleckd.S
-# IPL record for 3380/3390 DASD
-#
-# S390 version
-# Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation
-# Author(s): Holger Smolinski <Holger.Smolinski@xxxxxxxxxx>
-#
-#
-# FIXME: should use the countarea to determine the blocksize
-# FIXME: should insert zeroes into memory when filling holes
-# FIXME: calculate blkpertrack from rdc data and blksize
-
-# change 09/20/00 removed obsolete store of ipldevice to textesegment
-
-# Usage of registers
-# r1: ipl subchannel ( general use, dont overload without save/restore !)
-# r10:
-# r13: base register index to 0x0000
-# r14: callers address
-# r15: temporary save register (we have no stack!)
-
-# storage layout:
-
-#include <asm/lowcore.h>
-
- .org 0
-.psw: .long 0x00080000,0x80000000+_start
-.ccw1: .long 0x06000000,0x00001000 # Re-Read enough of bootsector to start
-.ccw2: .long 0x00000000,0x00000000 # read countarea of record 1 to s/w.
-
- .org 0x58
-.Lextn: .long 0x000a0000,0x00000000+.Lextn
-.Lsvcn: .long 0x000a0000,0x00000000+.Lsvcn
-.Lprgn: .long 0x00080000,0x00000000+.Lecs
-.Lmcn: .long 0x000a0000,0x00000000+.Lmcn
-.Lion: .long 0x00080000,0x80000000+.Lionewaddr
-
- .org 0xe0
-.Llstad:.long 0x00000000,0x00000000 # sectorno + ct of bootlist
-
- .org 0xf0 # Lets start now...
-_start: .globl _start
- l %r1,__LC_SUBCHANNEL_ID # get IPL-subchannel from lowcore
- st %r1,__LC_IPLDEV # keep it for reipl
- stsch .Lrdcdata
- oi .Lrdcdata+5,0x84 # enable ssch and multipath mode
-.Lecs: xi .Lrdcdata+27,0x01 # enable concurrent sense
- msch .Lrdcdata
- xi .Lprgn,6 # restore Wait and d/a bit in PCnew PSW
- l %r2,.Lparm
- mvc 0x0(8,%r2),.Lnull # set parmarea to null
- lctl %c6,%c6,.Lc6 # enable all interrupts
-.Lrdc: # read device characteristics
- la %r6,.Lrdcccw
- st %r6,.Lorb+8 # store cp-address to orb
- bras %r15,.Lssch # start I/O
- oi .Llodata+1,0x80
- lh %r5,.Lcountarea+6 # init r5 from countarea
- stcm %r5,3,.Lrdccw+2 # and store into rd template *FIXME*
- stcm %r5,3,.Llodata+14 # and store into lodata *FIXME*
-.Lbootlist:
- l %r2,.Llstad
- l %r3,.Lblklst
- lhi %r4,1
- bras %r14,.Lreadblks
-.Lloader:
- l %r10,.Lblklst # r10 is index to bootlist
- lhi %r5,4 # r5: skip 4 blocks = firstpage....
-.Lkloop:
- clc .Lnull(8),0(%r10) # test blocklist
- jz .Lchkparm # end of list?
- l %r2,0(%r10) # get startblock to r2
- slr %r4,%r4 # erase r4
- icm %r4,1,7(%r10) # get blockcount
- slr %r3,%r3 # get address to r3
- icm %r3,0xe,4(%r10)
- chi %r5,0 # still blocks to skip?
- jz .Ldoread # no: start reading
- cr %r5,%r4 # #skipblocks >= blockct?
- jm .L007 # no: skip the blocks one by one
-.L006:
- sr %r5,%r4 # decrease number of blocks to skip
- j .Lkcont # advance to next entry
-.L007:
- ahi %r2,1 # skip 1 block...
- bctr %r4,0 # update blockct
- ah %r3,.Lcountarea+6 # increment address
- bct %r5,.L007 # 4 blocks skipped?
-.Ldoread:
- ltr %r2,%r2 # test startblock
- jz .Lzeroes # startblocks is zero (hole)
-.Ldiskread:
- bras %r14,.Lreadblks
- j .Lkcont
-.Lzeroes:
- lr %r2,%r3
-.L001: slr %r3,%r3
- icm %r3,3,.Lcountarea+6 # get blocksize
- slr %r5,%r5 # no bytes to move
-.L008: mvcle %r2,%r4,0 # fill zeroes to storage
- jo .L008 # until block is filled
- brct %r4,.L001 # skip to next block
-.Lkcont:
- ahi %r10,8
- j .Lkloop
-.Lchkparm:
- lm %r3,%r4,.Lstart # load .Lstart and .Lparm
- clc 0x0(4,%r4),.Lnull
- je .Lrunkern
- mvc 0x480(128,%r3),0(%r4) # move 1k-0x80 to parmarea
- mvc 0x500(256,%r3),0x80(%r4)
- mvc 0x600(256,%r3),0x180(%r4)
- mvc 0x700(256,%r3),0x280(%r4)
-.Lrunkern:
-# lhi %r2,17
-# sll %r2,12
-# st %r1,0xc6c(%r2) # store iplsubchannel to lowcore
-# st %r1,0xc6c # store iplsubchannel to lowcore
- br %r3
-# This function does the start IO
-# r2: number of first block to read ( input by caller )
-# r3: address to read data to ( input by caller )
-# r4: number of blocks to read ( input by caller )
-# r5: destroyed
-# r6: blocks per track ( input by caller )
-# r7: number of heads
-# r8:
-# r9:
-# r10:
-# r11: temporary register
-# r12: local use for base address
-# r13: base address for module
-# r14: address of caller for subroutine
-# r15: temporary save register (since we have no stack)
-.Lreadblks:
- la %r12,.Ldeccw
- st %r12,8+.Lorb # store cpaddr to orb
- ahi %r12,0x10 # increment r12 to point to rdccw
- oi 1(%r12),0x40 # set CC in rd template
- # first setup the read CCWs
- lr %r15,%r4 # save number or blocks
- slr %r7,%r7
- icm %r7,3,.Lrdcdata+14 # load heads to r7
- lhi %r6,9
- clc .Lrdcdata+3(2),.L9345
- je .L011
- lhi %r6,10
- clc .Lrdcdata+3(2),.L3380
- je .L011
- lhi %r6,12
- clc .Lrdcdata+3(2),.L3390
- je .L011
- bras %r14,.Ldisab
-.L011:
- # loop for nbl times
-.Lrdloop:
- mvc 0(8,%r12),.Lrdccw # copy template to this ccw
- st %r3,4(%r12) # store target address to this ccw
- bct %r4,.L005 # decrement no of blks still to do
- ni 1(%r12),0x3f # delete CC from last ccw
- lr %r4,%r15 # restore number of blocks
- # read CCWs are setup now
- stcm %r4,3,.Llodata+2 # store blockno to lodata clears r4
- ar %r4,%r2 # r4 (clear): ebl = blk + nbl
- bctr %r4,0 # decrement r4 ( last blk touched
- srda %r2,32 # trk = blk / bpt, bot = blk % bpt
- dr %r2,%r6 # r3: trk, r2: bot
- ahi %r2,1 # bot++ ( we start counting at 1 )
- stcm %r2,1,.Llodata+12 # store bot to lodata
- xr %r2,%r2 # cy = trk / heads, hd = trk % heads
- dr %r2,%r7 # r3: cy, r2: hd
- sll %r3,16 # combine to CCHH in r3
- or %r3,%r2
- st %r3,.Ldedata+8 # store cchh to dedata
- st %r3,.Llodata+4 # store cchh to lodata
- st %r3,.Llodata+8 # store cchh to lodata
- lr %r15,%r5 # save r5
- srda %r4,32 # tr2 = ebl / bpt
- dr %r4,%r6 # r5: tr2, r4: bot2
- xr %r4,%r4 # cy2 = tr2 / heads, hd2 = hd2 % heads
- dr %r4,%r7 # r5: cy2, r4: hd2
- stcm %r5,3,.Ldedata+12 # store cy2,hd2 to dedata
- stcm %r4,3,.Ldedata+14 # store cy2,hd2 to dedata
- lr %r5,%r15 # restore r5
- # CCWs are setup now, arent they?
- bras %r15,.Lssch # start I/O
- br %r14 # return to caller
-.L005:
- ah %r3,.Lcountarea+6 # add blocksize to target address
- ahi %r12,8 # add sizeof(ccw) to base address
- j .Lrdloop
-# end of function
-# This function does the start IO
-# r1: Subchannel number
-# r8: ORB address
-# r9: IRB address
-.Lssch:
- lhi %r13,10 # initialize retries
-.L012:
- ssch .Lorb # start I/O
- jz .Ltpi # ok?
- bras %r14,.Ldisab # error
-.Ltpi:
- lpsw .Lwaitpsw # load wait-PSW
-.Lionewaddr:
- c %r1,0xb8 # compare to ipl subhchannel
- jnz .Ltpi # not equal: loop
- clc 0xbc(4),.Lorb # cross check the intparm
- jnz .Ltpi # not equal: loop
- tsch .Lirb # get status
- tm .Lirb+9,0xff # channel status ?
- jz .L003 # CS == 0x00
- bras %r14,.Ldisab # error
-.L003:
- tm .Lirb+8,0xf3 # DS different from CE/DE
- jz .L004 # ok ?
- bct %r13,.L012 # retries <= 5 ?
- bras %r14,.Ldisab # error
-.L004:
- tm .Lirb+8,0x04 # DE set?
- jz .Ltpi # DE not set, loop
-.Lsschend:
- br %r15 # return to caller
-# end of function
-# In case of error goto disabled wait with %r14 containing the caller
-.Ldisab:
- st %r14,.Ldisabpsw+4
- lpsw .Ldisabpsw
-
-# FIXME pre-initialized data should be listed first
-# NULLed storage can be taken from anywhere ;)
-.Lblklst:
- .long 0x00002000
- .align 8
-.Ldisabpsw:
- .long 0x000a0000,0x00000000
-.Lwaitpsw:
- .long 0x020a0000,0x00000000+.Ltpi
-.Lorb:
- .long 0x0049504c,0x0080ff00 # intparm is " IPL"
-.Lc6: .long 0xff000000
-.Lstart:
- .long 0x00010000 # do not separate .Lstart and .Lparm
-.Lparm:
- .long 0x00008000 # they are loaded with a LM
-.L3390:
- .word 0x3390
-.L9345:
- .word 0x9345
-.L3380:
- .word 0x3380
-.Lnull:
- .long 0x00000000,0x00000000
- .align 4
-.Lrdcdata:
- .long 0x00000000,0x00000000
- .long 0x00000000,0x00000000
- .long 0x00000000,0x00000000
- .long 0x00000000,0x00000000
- .long 0x00000000,0x00000000
- .long 0x00000000,0x00000000
- .long 0x00000000,0x00000000
- .long 0x00000000,0x00000000
-.Lirb:
- .long 0x00000000,0x00000000
- .long 0x00000000,0x00000000
- .long 0x00000000,0x00000000
- .long 0x00000000,0x00000000
- .long 0x00000000,0x00000000
- .long 0x00000000,0x00000000
- .long 0x00000000,0x00000000
- .long 0x00000000,0x00000000
-.Lcountarea:
- .word 0x0000 # cyl;
- .word 0x0000 # head;
- .byte 0x00 # record;
- .byte 0x00 # key length;
- .word 0x0000 # data length == blocksize;
-.Ldedata:
- .long 0x40c00000,0x00000000
- .long 0x00000000,0x00000000
-.Llodata:
- .long 0x06000001,0x00000000
- .long 0x00000000,0x01000000
- .long 0x12345678
- .org 0x7c8
-.Lrdcccw: # CCW read device characteristics
- .long 0x64400040,0x00000000+.Lrdcdata
- .long 0x63400010,0x00000000+.Ldedata
- .long 0x47400010,0x00000000+.Llodata
- .long 0x12000008,0x00000000+.Lcountarea
-.Ldeccw:
- .long 0x63400010,0x00000000+.Ldedata
-.Lloccw:
- .long 0x47400010,0x00000000+.Llodata
-.Lrdccw:
- .long 0x86400000,0x00000000
- .org 0x800
-# end of pre initialized data is here CCWarea follows
-# from here we load 1k blocklist
-# end of function
-
diff -urN linux-2.6/arch/s390/boot/iplfba.S linux-2.6-s390/arch/s390/boot/iplfba.S
--- linux-2.6/arch/s390/boot/iplfba.S Mon Sep 8 21:49:51 2003
+++ linux-2.6-s390/arch/s390/boot/iplfba.S Thu Jan 1 01:00:00 1970
@@ -1,131 +0,0 @@
-#
-# Ipl block for fba devices
-# Copyright (C) 1998 IBM Corporation
-# Author(s): Martin Schwidefsky
-#
-# startup for ipl at address 0
-# start with restart
-
-# The first 24 byes are loaded by ipl to addresses 0-23 (a PSW and two CCWs).
-# The CCWs on 8-23 are used as a continuation of the implicit ipl channel
-# program. The fba ipl loader only uses the CCW on 8-15 to load the first 512
-# byte block to location 0-511 (the reading starts again at block 0, byte 0).
-# The second CCW is used to store the location of the load list.
- .org 0
- .long 0x00080000,0x80000000+_start # The first 24 byte are loaded
- .long 0x02000000,0x20000200 # by ipl to addresses 0-23.
- .long 0x00000001,0x00000001 # (PSW, one CCW & loadlist info).
-
- .globl _start
-_start:
- basr %r13,0
-.LPG0:
- l %r1,0xb8 # load ipl subchannel number
- lhi %r2,0x200 # location for the loadlist
- lm %r3,%r4,0x10 # blocknr and length of loadlist
- bras %r14,.Lloader # load loadlist
-
- lhi %r11,0x400
- lhi %r12,0x200 # load address of loadlist
- l %r3,0(%r12) # get first block number
- l %r4,4(%r12) # get first block count
- la %r12,8(%r12)
- j .Llistloop
- .org 0x50
-.Llistloop:
- lr %r2,%r11 # load address
- lr %r5,%r4 # block count
- mhi %r5,512
- la %r11,0(%r5,%r11) # update load address
- bras %r14,.Lloader # load chunk of the image
- l %r3,0(%r12) # get next block number
- icm %r4,15,4(%r12) # get next block count
- la %r12,8(%r12)
- jnz .Llistloop
-
-#
-# everything loaded, go for it
-#
- l %r1,.Lstart-.LPG0(%r13)
- br %r1
-
-#
-# subroutine for loading a sequence of block from fba
-# %r2: load address (24 bit address)
-# %r3: number of first block (unsigned long)
-# %r4: number of blocks to load (unsigned short)
-#
- .org 0xC0
-.Lloader:
- la %r5,.Llo-.LPG0(%r13)
- sth %r4,2(%r5) # initialize block count
- st %r3,4(%r5) # initialize block number
- la %r5,.Lccws-.LPG0(%r13)
- mhi %r4,512
- sth %r4,22(%r5) # initialize byte count
- icm %r2,8,16(%r5)
- st %r2,16(%r5) # initialize CCW data address
-
- slr %r2,%r2
- la %r3,.Lorb-.LPG0(%r13) # r2 = address of orb into r2
- la %r4,.Ltinfo-.LPG0(%r13) # r3 = address of tpi info block
- la %r5,.Lirb-.LPG0(%r13) # r4 = address of irb
-
- lctl %c6,%c6,.Lc6-.LPG0(%r13)
-.Lldlp:
- ssch 0(%r3) # read blocks
-.Ltpi:
- tpi 0(%r4) # test pending interrupt
- jz .Ltpi
- c %r1,0(%r4) # compare subchannel number
- jne .Ltpi
- tsch 0(%r5)
- slr %r0,%r0
- tm 8(%r5),0x82 # do we have a problem ?
- jnz .Ldwpsw
- tm 8(%r5),0x04 # got device end ?
- jz .Ltpi
-.Lexit:
- br %r14
-
- .align 8
-.Ldwpsw:.long 0x000a0000,0x00000000
-.Lorb: .long 0x00000000,0x0000ff00,.Lccws
-.Ltinfo:.long 0
-.Lirb: .long 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
-.Lc6: .long 0xff000000
-.Lloadp:.long 0,0
-.Lparm: .long 0x10400
-.Lstart:.long 0x10000
- .align 8
-.Lccws: .long 0x63000000+.Lde,0x60000010 # define extent
- .long 0x43000000+.Llo,0x60000008 # locate
-# offset 1 in read CCW: data address (24 bit)
-# offset 6 in read CCW: number of bytes (16 bit)
- .long 0x42000000,0x20000000 # read
-.Lde: .long 0x40000200,0x00000000
- .long 0x00000000,0x00001000
-# offset 2 in .Llo: block count (unsigned short)
-# offset 4 in .Llo: block number (unsigned long)
-.Llo: .long 0x06000000,0x00000000
-
- .org 0x200
- .long 0x00000002,0x0000007f
- .long 0x00000081,0x0000007f
- .long 0x00000100,0x0000007f
- .long 0x0000017f,0x0000007f
- .long 0x000001fe,0x0000007f
- .long 0x0000027d,0x0000007f
- .long 0x000002fc,0x0000007f
- .long 0x0000037b,0x0000007f
- .long 0x000003fa,0x0000007f
- .long 0x00000479,0x0000007f
- .long 0x000004f8,0x0000007f
- .long 0x00000577,0x0000007f
- .long 0x000005f6,0x0000007f
- .long 0x00000675,0x0000007f
- .long 0x000006f4,0x0000007f
- .long 0x00000773,0x0000003f
- .long 0x00000000,0x00000000
- .org 0x400
-
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/