Re: highmem problem with lc2000

From: Stefano Carlotto
Date: Mon Oct 06 2003 - 14:42:03 EST


I've tried some things, in the hope to find a solution: 2.4.23pre, some patches, but no good news. Only one thing, that may help, I hope, if i select HIGHMEM support 64GB, instead of 4GB, I have the same super slowness problem asap the kernel had started, but it's less severe and i can see without becoming old the fsck of mounted partition.
I tried also to play with high memory buffers on or off, but no change. I've read about some problem hanging around with some hardware driver not correctly using highmem, but the scsi on these machine is a sym53c896, and it's safe highmode written...
I read of problems selecting mp1.1 on bios setup under linux, but i do not manage to find any similar setup in bios. anyway, i upgraded to the last bios from hp.
any hint? any tactic you can suggest?
thanks in advance

Stefano Carlotto wrote:

I'm having this strange problem: hp lc2000 (sym53c896 scsi), 2 pentium III, kernel 2.4.22, just upgraded to 1664MB, raid software used, slackware 8.1.
Obviously, if i do not activate highmem support on kernel, I can see only 896MB, as I had before the memory upgrade.
If I activate high mem support (4GB), the system starts normally, until it goes multiuser: then it slows in a incredible way, almost stop, no disk activity, no ping answer, if I press return on keyboard, it scrolls very very slooooow... ( vesa framebuffer used)
any idea? :(

this is /proc/mtrr ( no highmem support compiled)
reg00: base=0x00000000 ( 0MB), size=1024MB: write-back, count=1
reg01: base=0x40000000 (1024MB), size= 512MB: write-back, count=1
reg02: base=0x60000000 (1536MB), size= 128MB: write-back, count=1


thanks
Stefano

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/



-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/