Re: problems with Seagate 120 GB drives when mutlwrite = 16

[Mark B]

Hi,

On Friday 24 October 2003 15:33, kris wrote:
> The 60GB disk (with the OS) is working fine on my nforce ide controller.
> but the 120GB disks are not... I verified, it is not a cabling issue...
> used different cables, different lengths, at the moment they are
> connected with shielded rounded cables.
>
> Is there a fix for this ( not the workaround ... disabling dma) or are
> these 120Gb disks just plain bad choice.... ;(

No, the same is on smaller Seagate disks, I have alot of 40GB Seagates running 
on 2.4.16/18 and they put the message on every boot, I can't remember 100% 
for 2.4.16, but 18 definetly.


-- 
Mark Burazin 
mark@xxxxxxxx
---<>---<>---<>---<>---<>---<>---<>---<>---<>
Lemna d.o.o.
http://www.lemna.biz - info@xxxxxxxx
<>---<>---<>---<>---<>---<>---<>---<>---<>---


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/