HP CISS Driver in 2.4.22 with ac-4 patchset

[Clemens Schwaighofer]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hi,

following: we have a HP DL360 Box here which has a HP Smart Array
Controler inside. Because I wanted to have my own kernel config I
decided to with 2.4.22-ac4. but after boot and loading the HP CISS
driver (compiled into kernel) he stuck at the point of
...
HP CISS Driver (v 2.4.47)
...
Partition check:
 cciss/c0d0:

nothing comes more. So I compiled 2.4.22 without the ac-4 patchset and
voila, it works fine.
...
HP CISS Driver (v 2.4.47)
cciss: Device 0xb178 has been found at bus 0 dev 4 func 0
      blocks= 35553120 block_size= 512
      heads= 255, sectors= 32, cylinders= 4357 RAID 1(0+1)

blk: queue c041b220, I/O limit 4294967295Mb (mask 0xffffffffffffffff)
Partition check:
 cciss/c0d0: p1 p2 p3 p4 < p5 p6 >
...

I don't know exactly what the changes are from 22 to 22-ac4 but there is
at least the monitor threads added. I also tried 23-pre8 and there it
also works.

configs bz2 & attached
- --
Clemens Schwaighofer - IT Engineer & System Administration
==========================================================
Tequila Japan, 6-17-2 Ginza Chuo-ku, Tokyo 104-8167, JAPAN
Tel: +81-(0)3-3545-7703            Fax: +81-(0)3-3545-7343
http://www.tequila.jp
==========================================================
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.1 (MingW32)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org

iD8DBQE/nfXzjBz/yQjBxz8RAl5sAKDZ9p/DX3u4WYyNksO9qCffSYE6dQCfW490
ptq+nqFYETN8cEHKInzhgaY=
=g7Ff
-----END PGP SIGNATURE-----

Attachment: linux-2.4.23-pre8-1.conf.bz2
Description: Binary data

Attachment: linux-2.4.22-1.conf.bz2
Description: Binary data

Attachment: linux-2.4.22-ac4-1.conf.bz2
Description: Binary data