Re: Linux 2.4.23-pre8

[chas williams]

>Well, ATM dosen't work for me. (from 2.4.22, 2.4.21 is OK).
>No traffic via ATM interfeces.
>
>[root@voices root]# ifconfig atm1
>atm1      Link encap:UNSPEC  HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-
>00-00
>          inet addr:XXX.XX.XX.XXX  Mask:255.255.255.252
>          UP RUNNING  MTU:9180  Metric:1
>          RX packets:9 errors:0 dropped:0 overruns:0 frame:0
>          TX packets:1 errors:0 dropped:0 overruns:0 carrier:0
>          collisions:0 txqueuelen:100
>          RX bytes:632 (632.0 b)  TX bytes:100 (100.0 b)

this doesnt look bad. i see 1 tx packet and some rx packets.  how
did you test this interface?  does tcpdump show anything?  could you
be more specific about this configuration so i could try to duplicate
your setup?  the nicstar driver seems to work for me in the 2.4.23-pre8
kernel (ilmid, signalling).  i tested the clip module as well but that
was via an arp server not clip over a pvc.

>Counters on all atm interfeces are still the same

what does atmdiag show?

>On good working kernel, during boot, i have messages like this:
>
>atm_connect (TX: cl 1,bw 0-0,sdu 9188; RX: cl 1,bw 0-0,sdu 9188,AAL 5)
>atm_connect (TX: cl 1,bw 0-0,sdu 9188; RX: cl 1,bw 0-0,sdu 9188,AAL 5)
>atm_connect (TX: cl 1,bw 0-0,sdu 9188; RX: cl 1,bw 0-0,sdu 9188,AAL 5)
>atm_connect (TX: cl 1,bw 0-0,sdu 9188; RX: cl 1,bw 0-0,sdu 9188,AAL 5)
>atm_connect (TX: cl 1,bw 0-0,sdu 9188; RX: cl 1,bw 0-0,sdu 9188,AAL 5)

these message were eliminated since they arent very useful and
quite noisy.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/