hda: no DRQ after issuing WRITE

[steve]

Hey guys,

i keep getting things like this in my dmesg

============================================
hda: status timeout: status=0xd0 { Busy }

hda: no DRQ after issuing WRITE
ide0: reset: success
hda: status timeout: status=0xd0 { Busy }

hda: no DRQ after issuing WRITE
ide0: reset: success
=============================================

>From hdparm
============================================
/dev/hda:

 Model=IC35L080AVVA07-0, FwRev=VA4OA52A, SerialNo=VNC402A4CBRJLA
 Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
 RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=52
 BuffType=DualPortCache, BuffSize=1863kB, MaxMultSect=16, MultSect=off
 CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=160836480
 IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
 PIO modes:  pio0 pio1 pio2 pio3 pio4
 DMA modes:  mdma0 mdma1 mdma2
 UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5
 AdvancedPM=yes: disabled (255) WriteCache=enabled
 Drive conforms to: ATA/ATAPI-5 T13 1321D revision 1:  2 3 4 5
=================================================

Ive searched high and low to try find out what this means, all ive found
it people keep saying its all different kinds of things..

I was wondering if this means my hdd is drying or is ti a setting?

Thanks guys,
Steve


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/