Re: Kernel bug when mounting SCSI CD-ROM
From: Badari Pulavarty
Date: Thu Nov 06 2003 - 17:12:08 EST
Hi,
I ran into the same problem earlier on my AMD64 box.
Try disabling IOMMU_DEBUG.
> #
> # Kernel hacking
> #
> # CONFIG_DEBUG_KERNEL is not set
> CONFIG_MAGIC_SYSRQ=y
> # CONFIG_FRAME_POINTER is not set
> CONFIG_IOMMU_DEBUG=y
> CONFIG_MCE_DEBUG=y
>
Let me know, if this fixes the problem for you.
Thanks,
Badari
On Wednesday 05 November 2003 01:50 pm, David Whysong wrote:
> Hi,
>
> This happened when I tried to mount a CD under linux 64-2.6.0-test9-2
> (using Andi Kleen's patch). The system is a dual Opteron 240, Tyan K8W
> motherboard; distro is Red Hat Taroon 3.9.5 beta. The CD-ROM drives are
> all on the 53c810a controller, the tape drive is on the LSI160U
> controller. Here is /proc/scsi/scsi:
>
> Attached devices:
> Host: scsi0 Channel: 00 Id: 01 Lun: 00
> Vendor: PIONEER Model: DVD-ROM DVD-303 Rev: 1.09
> Type: CD-ROM ANSI SCSI revision: 02
> Host: scsi0 Channel: 00 Id: 02 Lun: 00
> Vendor: PLEXTOR Model: CD-R PX-W1210S Rev: 1.03
> Type: CD-ROM ANSI SCSI revision: 02
> Host: scsi0 Channel: 00 Id: 03 Lun: 00
> Vendor: TOSHIBA Model: CD-ROM XM-6201TA Rev: 1037
> Type: CD-ROM ANSI SCSI revision: 02
> Host: scsi1 Channel: 00 Id: 06 Lun: 00
> Vendor: SEAGATE Model: DAT 06240-XXX Rev: 8240
> Type: Sequential-Access ANSI SCSI revision: 03
>
> Kernel config and lspci output is appended after the bug report.
>
> I also posted a report to LKML a while back about disk corruption occuring
> with Promise IDE controller cards. I'd really like for something to work
> on this system...
>
> Also, if anyone can tell me how to get the agpgart working on this
> machine, I'd appreciate it.
>
>
> Nov 5 13:23:33 sleepy kernel: Kernel BUG at pci_gart:398
> Nov 5 13:23:33 sleepy kernel: invalid operand: 0000 [1]
> Nov 5 13:23:33 sleepy kernel: CPU 1
> Nov 5 13:23:33 sleepy kernel: Pid: 2642, comm: mount Not tainted
> Nov 5 13:23:33 sleepy kernel: RIP: 0010:[<ffffffff8011f74e>]
> <ffffffff8011f74e>{__pci_map_cont+94} Nov 5 13:23:33 sleepy kernel: RSP:
> 0018:000001001fac1a98 EFLAGS: 00010006 Nov 5 13:23:33 sleepy kernel: RAX:
> 0000000000000003 RBX: 0000010008113058 RCX: 0000000000000002 Nov 5
> 13:23:33 sleepy kernel: RDX: 0000000000003f9f RSI: 0000000000003f9d RDI:
> 0000010008113058 Nov 5 13:23:33 sleepy kernel: RBP: 0000000000000003 R08:
> 0000000000000001 R09: 0000000022615800 Nov 5 13:23:33 sleepy kernel: R10:
> 0000000000003f9d R11: 0000000000000800 R12: 0000000000000001 Nov 5
> 13:23:33 sleepy kernel: R13: 0000010008113040 R14: 0000000000000002 R15:
> 00000100081c0800 Nov 5 13:23:33 sleepy kernel: FS: 0000002a9557a698(0000)
> GS:ffffffff804ce540(0000) knlGS:0000000000000000 Nov 5 13:23:33 sleepy
> kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b Nov 5 13:23:33
> sleepy kernel: CR2: 0000007fbfffd6d0 CR3: 000000000383f000 CR4:
> 00000000000006a0 Nov 5 13:23:33 sleepy kernel: Process mount (pid: 2642,
> stackpage=10035c31180) Nov 5 13:23:33 sleepy kernel: Stack:
> 0000010008113088 0000000000000003 0000010008113040 0000000021e30800 Nov 5
> 13:23:33 sleepy kernel: 0000000000000020 ffffffff8011f97b
> 000001000812bc40 0000000000000002 Nov 5 13:23:33 sleepy kernel:
> 0000000200000001 00000100083da080 Nov 5 13:23:33 sleepy kernel: Call
> Trace:<ffffffff8011f97b>{pci_map_sg+331}
> <ffffffff8029993a>{__map_scsi_sg_data+26} Nov 5 13:23:33 sleepy kernel:
> <ffffffff80299e11>{sym_scatter+65}
> <ffffffff8029a091>{sym_setup_data_and_start+241} Nov 5 13:23:33 sleepy
> kernel: <ffffffff80299f80>{sym_queue_command+224}
> <ffffffff8029a47e>{sym53c8xx_queue_command+206} Nov 5 13:23:33 sleepy
> kernel: <ffffffff80290d2a>{scsi_dispatch_cmd+522}
> <ffffffff80296000>{scsi_request_fn+704} Nov 5 13:23:33 sleepy kernel:
> <ffffffff802677ad>{generic_unplug_device+93}
> <ffffffff802679a9>{blk_run_queues+201} Nov 5 13:23:33 sleepy kernel:
> <ffffffff80176de9>{block_sync_page+9} <ffffffff8015121d>{__lock_page+173}
> Nov 5 13:23:33 sleepy kernel:
> <ffffffff80134be0>{autoremove_wake_function+0}
> <ffffffff80134be0>{autoremove_wake_function+0} Nov 5 13:23:33 sleepy
> kernel: <ffffffff80151291>{find_get_page+65}
> <ffffffff80151941>{do_generic_mapping_read+401} Nov 5 13:23:33 sleepy
> kernel: <ffffffff80151b60>{file_read_actor+0}
> <ffffffff80151e2f>{__generic_file_aio_read+415} Nov 5 13:23:33 sleepy
> kernel: <ffffffff80151f1b>{generic_file_read+123}
> <ffffffff80174bd1>{invalidate_bh_lru+65} Nov 5 13:23:33 sleepy kernel:
> <ffffffff8018d2e8>{__invalidate_device+88}
> <ffffffff8017a556>{check_disk_change+54} Nov 5 13:23:33 sleepy kernel:
> <ffffffff802cf4bd>{cdrom_open+173} <ffffffff8017a77c>{do_open+348} Nov
> 5 13:23:33 sleepy kernel: <ffffffff8017ab19>{blkdev_open+57}
> <ffffffff80170b75>{dentry_open+181} Nov 5 13:23:33 sleepy kernel:
> <ffffffff801718d7>{vfs_read+199} <ffffffff80171b39>{sys_read+73} Nov 5
> 13:23:33 sleepy kernel: <ffffffff8010ff84>{system_call+124} Nov 5
> 13:23:33 sleepy kernel:
> Nov 5 13:23:33 sleepy kernel: Code: 0f 0b 1c 88 3c 80 ff ff ff ff 8e 01 66
> 66 90 66 66 90 45 39 Nov 5 13:23:33 sleepy kernel: RIP
> <ffffffff8011f74e>{__pci_map_cont+94} RSP <000001001fac1a98> Nov 5
> 13:23:33 sleepy kernel: <6>note: mount[2642] exited with preempt_count 1
> Nov 5 13:23:33 sleepy kernel: bad: scheduling while atomic!
> Nov 5 13:23:33 sleepy kernel:
> Nov 5 13:23:33 sleepy kernel: Call Trace:<ffffffff801318ee>{schedule+94}
> <ffffffff8013381b>{io_schedule+43} Nov 5 13:23:33 sleepy kernel:
> <ffffffff80151225>{__lock_page+181}
> <ffffffff80134be0>{autoremove_wake_function+0} Nov 5 13:23:33 sleepy
> kernel: <ffffffff80134be0>{autoremove_wake_function+0}
> <ffffffff8015bb40>{truncate_inode_pages+560} Nov 5 13:23:33 sleepy kernel:
> <ffffffff8017ac07>{blkdev_put+167} <ffffffff80172862>{__fput+82} Nov
> 5 13:23:33 sleepy kernel: <ffffffff8017108e>{filp_close+126}
> <ffffffff80139353>{put_files_struct+115} Nov 5 13:23:33 sleepy kernel:
> <ffffffff8013a1fe>{do_exit+670} <ffffffff801114fc>{oops_end+76} Nov 5
> 13:23:33 sleepy kernel: <ffffffff801115f5>{die+69}
> <ffffffff80111a7f>{do_invalid_op+159}
>
>
> PCI configuration:
>
> 00:06.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8111 PCI (rev 07)
> (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle-
> MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz+
> UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR-
> <PERR- Latency: 64
> Bus: primary=00, secondary=03, subordinate=03, sec-latency=64
> I/O behind bridge: 00009000-00009fff
> Memory behind bridge: fd700000-fd8fffff
> Prefetchable memory behind bridge: d9100000-d91fffff
> BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
> Capabilities: [c0] #08 [0086]
> Capabilities: [f0] #08 [8000]
>
> 00:07.0 ISA bridge: Advanced Micro Devices [AMD] AMD-8111 LPC (rev 05)
> Subsystem: Advanced Micro Devices [AMD] AMD-8111 LPC
> Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B- ParErr-
> DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0
>
> 00:07.1 IDE interface: Advanced Micro Devices [AMD] AMD-8111 IDE (rev 03)
> (prog-if 8a [Master SecP PriP]) Subsystem: Advanced Micro Devices [AMD]
> AMD-8111 IDE
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr-
> DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32
> Region 4: I/O ports at ffa0 [size=16]
>
> 00:07.2 SMBus: Advanced Micro Devices [AMD] AMD-8111 SMBus 2.0 (rev 02)
> Subsystem: Advanced Micro Devices [AMD] AMD-8111 SMBus 2.0
> Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr-
> DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin D
> routed to IRQ 19
> Region 0: I/O ports at b480 [size=32]
>
> 00:07.3 Bridge: Advanced Micro Devices [AMD] AMD-8111 ACPI (rev 05)
> Subsystem: Advanced Micro Devices [AMD] AMD-8111 ACPI
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr-
> DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>
> 00:07.5 Multimedia audio controller: Advanced Micro Devices [AMD] AMD-8111
> AC97 Audio (rev 03) Subsystem: Tyan Computer: Unknown device 2885
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr-
> DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64
> Interrupt: pin B routed to IRQ 17
> Region 0: I/O ports at b800 [size=256]
> Region 1: I/O ports at bc00 [size=64]
>
> 00:0a.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge (rev
> 12) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle-
> MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz+
> UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR-
> <PERR- Latency: 64
> Bus: primary=00, secondary=02, subordinate=02, sec-latency=64
> I/O behind bridge: 00007000-00008fff
> Memory behind bridge: fd600000-fd6fffff
> Prefetchable memory behind bridge: 00000000d9000000-00000000d9000000
> BridgeCtl: Parity+ SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
> Capabilities: [a0] PCI-X non-bridge device.
> Command: DPERE+ ERO+ RBC=0 OST=0
> Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-, DC=simple, DMMRBC=0,
> DMOST=0, DMCRS=0, RSCEM- Capabilities: [b8] #08 [8000] Capabilities: [c0]
> #08 [004a]
>
> 00:0a.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X APIC (rev 01)
> (prog-if 10 [IO-APIC]) Subsystem: Advanced Micro Devices [AMD] AMD-8131
> PCI-X APIC
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr-
> DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0
> Region 0: Memory at fd9fe000 (64-bit, non-prefetchable) [size=4K]
>
> 00:0b.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge (rev
> 12) (prog-if 00 [Normal decode]) Control: I/O- Mem+ BusMaster+ SpecCycle-
> MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz+
> UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR-
> <PERR- Latency: 64
> Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
> Memory behind bridge: fd500000-fd5fffff
> Prefetchable memory behind bridge: 00000000d8f00000-00000000d8f00000
> BridgeCtl: Parity+ SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
> Capabilities: [a0] PCI-X non-bridge device.
> Command: DPERE+ ERO+ RBC=0 OST=4
> Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-, DC=simple, DMMRBC=0,
> DMOST=0, DMCRS=0, RSCEM- Capabilities: [b8] #08 [8000]
>
> 00:0b.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X APIC (rev 01)
> (prog-if 10 [IO-APIC]) Subsystem: Advanced Micro Devices [AMD] AMD-8131
> PCI-X APIC
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr-
> DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0
> Region 0: Memory at fd9ff000 (64-bit, non-prefetchable) [size=4K]
>
> 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr-
> DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Capabilities: [80] #08
> [2101]
> Capabilities: [a0] #08 [2101]
> Capabilities: [c0] #08 [2101]
>
> 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr-
> DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>
> 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr-
> DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>
> 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr-
> DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>
> 00:19.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr-
> DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Capabilities: [80] #08
> [2101]
> Capabilities: [a0] #08 [2101]
> Capabilities: [c0] #08 [2101]
>
> 00:19.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr-
> DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>
> 00:19.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr-
> DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>
> 00:19.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr-
> DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>
> 02:07.0 Unknown mass storage controller: Promise Technology, Inc. 20269
> (rev 02) (prog-if 85) Subsystem: Promise Technology, Inc. Ultra133TX2
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr-
> DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (1000ns
> min, 4500ns max), cache line size 10
> Interrupt: pin A routed to IRQ 26
> Region 0: I/O ports at 8c00 [size=8]
> Region 1: I/O ports at 8080 [size=4]
> Region 2: I/O ports at 8000 [size=8]
> Region 3: I/O ports at 7c00 [size=4]
> Region 4: I/O ports at 7880 [size=16]
> Region 5: Memory at fd6d4000 (32-bit, non-prefetchable) [size=16K]
> Expansion ROM at fd6d0000 [disabled] [size=16K]
> Capabilities: [60] Power Management version 1
> Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 02:08.0 SCSI storage controller: LSI Logic / Symbios Logic 53c1010 Ultra3
> SCSI Adapter (rev 01) Subsystem: LSI Logic / Symbios Logic: Unknown device
> 1030
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr-
> DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 72 (4250ns
> min, 4500ns max), cache line size 10
> Interrupt: pin A routed to IRQ 27
> Region 0: I/O ports at 8400 [size=256]
> Region 1: Memory at fd6df800 (64-bit, non-prefetchable) [size=1K]
> Region 3: Memory at fd6da000 (64-bit, non-prefetchable) [size=8K]
> Expansion ROM at fd680000 [disabled] [size=128K]
> Capabilities: [40] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 02:08.1 SCSI storage controller: LSI Logic / Symbios Logic 53c1010 Ultra3
> SCSI Adapter (rev 01) Subsystem: LSI Logic / Symbios Logic: Unknown device
> 1030
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr-
> DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 72 (4250ns
> min, 4500ns max), cache line size 10
> Interrupt: pin B routed to IRQ 24
> Region 0: I/O ports at 8800 [size=256]
> Region 1: Memory at fd6dfc00 (64-bit, non-prefetchable) [size=1K]
> Region 3: Memory at fd6dc000 (64-bit, non-prefetchable) [size=8K]
> Expansion ROM at fd6a0000 [disabled] [size=128K]
> Capabilities: [40] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 02:09.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5703 Gigabit
> Ethernet (rev 02) Subsystem: Tyan Computer: Unknown device 2885
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr-
> DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (16000ns
> min), cache line size 10
> Interrupt: pin A routed to IRQ 24
> Region 0: Memory at fd6f0000 (64-bit, non-prefetchable) [size=64K]
> Expansion ROM at fd6e0000 [disabled] [size=64K]
> Capabilities: [40] PCI-X non-bridge device.
> Command: DPERE- ERO- RBC=0 OST=0
> Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-, DC=simple, DMMRBC=0,
> DMOST=0, DMCRS=0, RSCEM- Capabilities: [48] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=1 PME-
> Capabilities: [50] Vital Product Data
> Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/3 Enable-
> Address: 000204001e082230 Data: 0458
>
> 03:00.0 USB Controller: Advanced Micro Devices [AMD] AMD-8111 USB (rev 0b)
> (prog-if 10 [OHCI]) Subsystem: Advanced Micro Devices [AMD] AMD-8111 USB
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr-
> DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (20000ns
> max)
> Interrupt: pin D routed to IRQ 19
> Region 0: Memory at fd8fd000 (32-bit, non-prefetchable) [size=4K]
>
> 03:00.1 USB Controller: Advanced Micro Devices [AMD] AMD-8111 USB (rev 0b)
> (prog-if 10 [OHCI]) Subsystem: Advanced Micro Devices [AMD] AMD-8111 USB
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr-
> DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (20000ns
> max)
> Interrupt: pin D routed to IRQ 19
> Region 0: Memory at fd8fe000 (32-bit, non-prefetchable) [size=4K]
>
> 03:0a.0 SCSI storage controller: LSI Logic / Symbios Logic 53c810 (rev 12)
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr-
> DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (2000ns
> min, 16000ns max), cache line size 10
> Interrupt: pin A routed to IRQ 16
> Region 0: I/O ports at 9000 [size=256]
> Region 1: Memory at fd8ff800 (32-bit, non-prefetchable) [size=256]
>
> 03:0b.0 RAID bus controller: CMD Technology Inc: Unknown device 3114 (rev
> 02) Subsystem: Tyan Computer: Unknown device 2885
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr-
> DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, cache
> line size 10
> Interrupt: pin A routed to IRQ 17
> Region 0: I/O ports at 9c00 [size=8]
> Region 1: I/O ports at 9880 [size=4]
> Region 2: I/O ports at 9800 [size=8]
> Region 3: I/O ports at 9480 [size=4]
> Region 4: I/O ports at 9400 [size=16]
> Region 5: Memory at fd8ffc00 (32-bit, non-prefetchable) [size=1K]
> Expansion ROM at fd800000 [disabled] [size=512K]
> Capabilities: [60] Power Management version 2
> Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=2 PME-
>
> 03:0c.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000
> Controller (PHY/Link) (prog-if 10 [OHCI]) Subsystem: Tyan Computer: Unknown
> device 2885
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr-
> DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (500ns
> min, 1000ns max), cache line size 10
> Interrupt: pin A routed to IRQ 19
> Region 0: Memory at fd8ff000 (32-bit, non-prefetchable) [size=2K]
> Region 1: Memory at fd8f8000 (32-bit, non-prefetchable) [size=16K]
> Capabilities: [44] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME+
>
> 04:00.0 Host bridge: Advanced Micro Devices [AMD] AMD-8151 System
> Controller (rev 13) Subsystem: Advanced Micro Devices [AMD] AMD-8151 System
> Controller Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr-
> DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0
> Region 0: Memory at e0000000 (32-bit, prefetchable) [size=256M]
> Capabilities: [a0] AGP version 3.0
> Status: RQ=31 SBA+ 64bit+ FW+ Rate=x1,x2,x4
> Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
> Capabilities: [c0] #08 [0060]
>
> 04:01.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8151 AGP Bridge (rev
> 13) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle-
> MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz+
> UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR-
> <PERR- Latency: 64
> Bus: primary=04, secondary=05, subordinate=05, sec-latency=64
> Memory behind bridge: fda00000-feafffff
> Prefetchable memory behind bridge: d9300000-dd3fffff
> BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
>
> 05:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G400 AGP (rev
> 03) (prog-if 00 [VGA]) Subsystem: Matrox Graphics, Inc. Millennium G400
> 32Mb SGRAM
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr-
> DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (4000ns
> min, 8000ns max), cache line size 10
> Interrupt: pin A routed to IRQ 16
> Region 0: Memory at da000000 (32-bit, prefetchable) [size=32M]
> Region 1: Memory at feafc000 (32-bit, non-prefetchable) [size=16K]
> Region 2: Memory at fe000000 (32-bit, non-prefetchable) [size=8M]
> Expansion ROM at feae0000 [disabled] [size=64K]
> Capabilities: [dc] Power Management version 2
> Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [f0] AGP version 2.0
> Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2
> Command: RQ=31 SBA+ AGP+ 64bit- FW- Rate=x1
>
>
> Kernel configuration:
> #
> # Automatically generated make config: don't edit
> #
> CONFIG_X86_64=y
> CONFIG_64BIT=y
> CONFIG_X86=y
> CONFIG_MMU=y
> CONFIG_RWSEM_GENERIC_SPINLOCK=y
> CONFIG_X86_CMPXCHG=y
> CONFIG_EARLY_PRINTK=y
> CONFIG_HPET_TIMER=y
> CONFIG_GENERIC_ISA_DMA=y
>
> #
> # Code maturity level options
> #
> CONFIG_EXPERIMENTAL=y
> CONFIG_CLEAN_COMPILE=y
> CONFIG_STANDALONE=y
>
> #
> # General setup
> #
> CONFIG_SWAP=y
> CONFIG_SYSVIPC=y
> # CONFIG_BSD_PROCESS_ACCT is not set
> CONFIG_SYSCTL=y
> CONFIG_LOG_BUF_SHIFT=15
> CONFIG_IKCONFIG=y
> CONFIG_IKCONFIG_PROC=y
> # CONFIG_EMBEDDED is not set
> CONFIG_KALLSYMS=y
> CONFIG_FUTEX=y
> CONFIG_EPOLL=y
> CONFIG_IOSCHED_NOOP=y
> CONFIG_IOSCHED_AS=y
> CONFIG_IOSCHED_DEADLINE=y
>
> #
> # Loadable module support
> #
> # CONFIG_MODULES is not set
>
> #
> # Processor type and features
> #
> CONFIG_MK8=y
> # CONFIG_GENERIC_CPU is not set
> CONFIG_X86_L1_CACHE_BYTES=64
> CONFIG_X86_L1_CACHE_SHIFT=6
> CONFIG_X86_TSC=y
> CONFIG_X86_GOOD_APIC=y
> CONFIG_X86_MSR=y
> CONFIG_X86_CPUID=y
> CONFIG_X86_IO_APIC=y
> CONFIG_X86_LOCAL_APIC=y
> CONFIG_MTRR=y
> CONFIG_SMP=y
> CONFIG_PREEMPT=y
> CONFIG_K8_NUMA=y
> CONFIG_DISCONTIGMEM=y
> CONFIG_NUMA=y
> CONFIG_HAVE_DEC_LOCK=y
> CONFIG_NR_CPUS=2
> CONFIG_GART_IOMMU=y
> CONFIG_X86_MCE=y
>
> #
> # Power management options
> #
> CONFIG_PM=y
> # CONFIG_SOFTWARE_SUSPEND is not set
>
> #
> # ACPI (Advanced Configuration and Power Interface) Support
> #
> CONFIG_ACPI=y
> CONFIG_ACPI_BOOT=y
> CONFIG_ACPI_INTERPRETER=y
> CONFIG_ACPI_SLEEP=y
> CONFIG_ACPI_SLEEP_PROC_FS=y
> # CONFIG_ACPI_AC is not set
> # CONFIG_ACPI_BATTERY is not set
> CONFIG_ACPI_BUTTON=y
> CONFIG_ACPI_FAN=y
> CONFIG_ACPI_PROCESSOR=y
> CONFIG_ACPI_THERMAL=y
> # CONFIG_ACPI_ASUS is not set
> # CONFIG_ACPI_TOSHIBA is not set
> # CONFIG_ACPI_DEBUG is not set
> CONFIG_ACPI_BUS=y
> CONFIG_ACPI_EC=y
> CONFIG_ACPI_POWER=y
> CONFIG_ACPI_PCI=y
> CONFIG_ACPI_SYSTEM=y
> # CONFIG_ACPI_RELAXED_AML is not set
>
> #
> # CPU Frequency scaling
> #
> # CONFIG_CPU_FREQ is not set
>
> #
> # Bus options (PCI etc.)
> #
> CONFIG_PCI=y
> CONFIG_PCI_DIRECT=y
> # CONFIG_PCI_LEGACY_PROC is not set
> # CONFIG_PCI_NAMES is not set
> # CONFIG_HOTPLUG is not set
>
> #
> # Executable file formats / Emulations
> #
> CONFIG_BINFMT_ELF=y
> CONFIG_BINFMT_MISC=y
> CONFIG_IA32_EMULATION=y
> CONFIG_COMPAT=y
> CONFIG_UID16=y
>
> #
> # Generic Driver Options
> #
>
> #
> # Memory Technology Devices (MTD)
> #
> # CONFIG_MTD is not set
>
> #
> # Parallel port support
> #
> CONFIG_PARPORT=y
> CONFIG_PARPORT_PC=y
> CONFIG_PARPORT_PC_CML1=y
> # CONFIG_PARPORT_SERIAL is not set
> CONFIG_PARPORT_PC_FIFO=y
> # CONFIG_PARPORT_PC_SUPERIO is not set
> # CONFIG_PARPORT_OTHER is not set
> # CONFIG_PARPORT_1284 is not set
>
> #
> # Block devices
> #
> # CONFIG_BLK_DEV_FD is not set
> # CONFIG_PARIDE is not set
> # CONFIG_BLK_CPQ_DA is not set
> # CONFIG_BLK_CPQ_CISS_DA is not set
> # CONFIG_BLK_DEV_DAC960 is not set
> # CONFIG_BLK_DEV_UMEM is not set
> CONFIG_BLK_DEV_LOOP=y
> CONFIG_BLK_DEV_CRYPTOLOOP=y
> # CONFIG_BLK_DEV_NBD is not set
> # CONFIG_BLK_DEV_RAM is not set
> # CONFIG_BLK_DEV_INITRD is not set
> # CONFIG_LBD is not set
>
> #
> # ATA/ATAPI/MFM/RLL support
> #
> CONFIG_IDE=y
> CONFIG_BLK_DEV_IDE=y
>
> #
> # Please see Documentation/ide.txt for help/info on IDE drives
> #
> # CONFIG_BLK_DEV_HD_IDE is not set
> CONFIG_BLK_DEV_IDEDISK=y
> CONFIG_IDEDISK_MULTI_MODE=y
> # CONFIG_IDEDISK_STROKE is not set
> # CONFIG_BLK_DEV_IDECD is not set
> # CONFIG_BLK_DEV_IDETAPE is not set
> # CONFIG_BLK_DEV_IDEFLOPPY is not set
> # CONFIG_BLK_DEV_IDESCSI is not set
> # CONFIG_IDE_TASK_IOCTL is not set
> # CONFIG_IDE_TASKFILE_IO is not set
>
> #
> # IDE chipset support/bugfixes
> #
> # CONFIG_BLK_DEV_CMD640 is not set
> CONFIG_BLK_DEV_IDEPCI=y
> # CONFIG_IDEPCI_SHARE_IRQ is not set
> # CONFIG_BLK_DEV_OFFBOARD is not set
> # CONFIG_BLK_DEV_GENERIC is not set
> # CONFIG_BLK_DEV_OPTI621 is not set
> # CONFIG_BLK_DEV_RZ1000 is not set
> CONFIG_BLK_DEV_IDEDMA_PCI=y
> # CONFIG_BLK_DEV_IDE_TCQ is not set
> # CONFIG_BLK_DEV_IDEDMA_FORCED is not set
> CONFIG_IDEDMA_PCI_AUTO=y
> # CONFIG_IDEDMA_ONLYDISK is not set
> # CONFIG_IDEDMA_PCI_WIP is not set
> CONFIG_BLK_DEV_ADMA=y
> # CONFIG_BLK_DEV_AEC62XX is not set
> # CONFIG_BLK_DEV_ALI15X3 is not set
> CONFIG_BLK_DEV_AMD74XX=y
> # CONFIG_BLK_DEV_CMD64X is not set
> # CONFIG_BLK_DEV_TRIFLEX is not set
> # CONFIG_BLK_DEV_CY82C693 is not set
> # CONFIG_BLK_DEV_CS5520 is not set
> # CONFIG_BLK_DEV_CS5530 is not set
> # CONFIG_BLK_DEV_HPT34X is not set
> # CONFIG_BLK_DEV_HPT366 is not set
> # CONFIG_BLK_DEV_SC1200 is not set
> # CONFIG_BLK_DEV_PIIX is not set
> # CONFIG_BLK_DEV_NS87415 is not set
> # CONFIG_BLK_DEV_PDC202XX_OLD is not set
> CONFIG_BLK_DEV_PDC202XX_NEW=y
> # CONFIG_PDC202XX_FORCE is not set
> # CONFIG_BLK_DEV_SVWKS is not set
> # CONFIG_BLK_DEV_SIIMAGE is not set
> # CONFIG_BLK_DEV_SIS5513 is not set
> # CONFIG_BLK_DEV_SLC90E66 is not set
> # CONFIG_BLK_DEV_TRM290 is not set
> # CONFIG_BLK_DEV_VIA82CXXX is not set
> CONFIG_BLK_DEV_IDEDMA=y
> # CONFIG_IDEDMA_IVB is not set
> CONFIG_IDEDMA_AUTO=y
> # CONFIG_DMA_NONPCI is not set
> # CONFIG_BLK_DEV_HD is not set
>
> #
> # SCSI device support
> #
> CONFIG_SCSI=y
> CONFIG_SCSI_PROC_FS=y
>
> #
> # SCSI support type (disk, tape, CD-ROM)
> #
> CONFIG_BLK_DEV_SD=y
> CONFIG_CHR_DEV_ST=y
> # CONFIG_CHR_DEV_OSST is not set
> CONFIG_BLK_DEV_SR=y
> # CONFIG_BLK_DEV_SR_VENDOR is not set
> CONFIG_CHR_DEV_SG=y
>
> #
> # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
> #
> # CONFIG_SCSI_MULTI_LUN is not set
> # CONFIG_SCSI_REPORT_LUNS is not set
> # CONFIG_SCSI_CONSTANTS is not set
> # CONFIG_SCSI_LOGGING is not set
>
> #
> # SCSI low-level drivers
> #
> # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
> # CONFIG_SCSI_ACARD is not set
> # CONFIG_SCSI_AACRAID is not set
> # CONFIG_SCSI_AIC7XXX is not set
> # CONFIG_SCSI_AIC7XXX_OLD is not set
> # CONFIG_SCSI_AIC79XX is not set
> # CONFIG_SCSI_ADVANSYS is not set
> # CONFIG_SCSI_MEGARAID is not set
> CONFIG_SCSI_SATA=y
> # CONFIG_SCSI_SATA_SVW is not set
> # CONFIG_SCSI_ATA_PIIX is not set
> # CONFIG_SCSI_SATA_PROMISE is not set
> # CONFIG_SCSI_SATA_VIA is not set
> # CONFIG_SCSI_BUSLOGIC is not set
> # CONFIG_SCSI_CPQFCTS is not set
> # CONFIG_SCSI_DMX3191D is not set
> # CONFIG_SCSI_EATA is not set
> # CONFIG_SCSI_EATA_PIO is not set
> # CONFIG_SCSI_FUTURE_DOMAIN is not set
> # CONFIG_SCSI_GDTH is not set
> # CONFIG_SCSI_IPS is not set
> # CONFIG_SCSI_INIA100 is not set
> # CONFIG_SCSI_PPA is not set
> # CONFIG_SCSI_IMM is not set
> CONFIG_SCSI_SYM53C8XX_2=y
> CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
> CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
> CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
> # CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
> # CONFIG_SCSI_QLOGIC_ISP is not set
> # CONFIG_SCSI_QLOGIC_FC is not set
> # CONFIG_SCSI_QLOGIC_1280 is not set
> # CONFIG_SCSI_DC395x is not set
> # CONFIG_SCSI_NSP32 is not set
> # CONFIG_SCSI_DEBUG is not set
>
> #
> # Multi-device support (RAID and LVM)
> #
> # CONFIG_MD is not set
>
> #
> # Telephony Support
> #
> # CONFIG_PHONE is not set
>
> #
> # Fusion MPT device support
> #
> # CONFIG_FUSION is not set
>
> #
> # IEEE 1394 (FireWire) support (EXPERIMENTAL)
> #
> CONFIG_IEEE1394=y
>
> #
> # Subsystem Options
> #
> # CONFIG_IEEE1394_VERBOSEDEBUG is not set
> # CONFIG_IEEE1394_OUI_DB is not set
>
> #
> # Device Drivers
> #
>
> #
> # Texas Instruments PCILynx requires I2C bit-banging
> #
> CONFIG_IEEE1394_OHCI1394=y
>
> #
> # Protocol Drivers
> #
> CONFIG_IEEE1394_VIDEO1394=y
> CONFIG_IEEE1394_SBP2=y
> # CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
> CONFIG_IEEE1394_ETH1394=y
> CONFIG_IEEE1394_DV1394=y
> CONFIG_IEEE1394_RAWIO=y
> # CONFIG_IEEE1394_CMP is not set
>
> #
> # Networking support
> #
> CONFIG_NET=y
>
> #
> # Networking options
> #
> CONFIG_PACKET=y
> CONFIG_PACKET_MMAP=y
> # CONFIG_NETLINK_DEV is not set
> CONFIG_UNIX=y
> # CONFIG_NET_KEY is not set
> CONFIG_INET=y
> CONFIG_IP_MULTICAST=y
> # CONFIG_IP_ADVANCED_ROUTER is not set
> # CONFIG_IP_PNP is not set
> # CONFIG_NET_IPIP is not set
> # CONFIG_NET_IPGRE is not set
> # CONFIG_IP_MROUTE is not set
> # CONFIG_ARPD is not set
> # CONFIG_INET_ECN is not set
> CONFIG_SYN_COOKIES=y
> # CONFIG_INET_AH is not set
> # CONFIG_INET_ESP is not set
> # CONFIG_INET_IPCOMP is not set
>
> #
> # IP: Virtual Server Configuration
> #
> # CONFIG_IP_VS is not set
> CONFIG_IPV6=y
> # CONFIG_IPV6_PRIVACY is not set
> CONFIG_INET6_AH=y
> CONFIG_INET6_ESP=y
> CONFIG_INET6_IPCOMP=y
> # CONFIG_IPV6_TUNNEL is not set
> # CONFIG_DECNET is not set
> # CONFIG_BRIDGE is not set
> CONFIG_NETFILTER=y
> # CONFIG_NETFILTER_DEBUG is not set
>
> #
> # IP: Netfilter Configuration
> #
> # CONFIG_IP_NF_CONNTRACK is not set
> # CONFIG_IP_NF_QUEUE is not set
> CONFIG_IP_NF_IPTABLES=y
> CONFIG_IP_NF_MATCH_LIMIT=y
> CONFIG_IP_NF_MATCH_IPRANGE=y
> CONFIG_IP_NF_MATCH_MAC=y
> CONFIG_IP_NF_MATCH_PKTTYPE=y
> CONFIG_IP_NF_MATCH_MARK=y
> CONFIG_IP_NF_MATCH_MULTIPORT=y
> CONFIG_IP_NF_MATCH_TOS=y
> CONFIG_IP_NF_MATCH_RECENT=y
> CONFIG_IP_NF_MATCH_ECN=y
> CONFIG_IP_NF_MATCH_DSCP=y
> CONFIG_IP_NF_MATCH_AH_ESP=y
> CONFIG_IP_NF_MATCH_LENGTH=y
> CONFIG_IP_NF_MATCH_TTL=y
> CONFIG_IP_NF_MATCH_TCPMSS=y
> CONFIG_IP_NF_MATCH_OWNER=y
> CONFIG_IP_NF_FILTER=y
> # CONFIG_IP_NF_TARGET_REJECT is not set
> # CONFIG_IP_NF_MANGLE is not set
> # CONFIG_IP_NF_TARGET_LOG is not set
> # CONFIG_IP_NF_TARGET_ULOG is not set
> # CONFIG_IP_NF_TARGET_TCPMSS is not set
> # CONFIG_IP_NF_ARPTABLES is not set
>
> #
> # IPv6: Netfilter Configuration
> #
> # CONFIG_IP6_NF_QUEUE is not set
> CONFIG_IP6_NF_IPTABLES=y
> CONFIG_IP6_NF_MATCH_LIMIT=y
> CONFIG_IP6_NF_MATCH_MAC=y
> CONFIG_IP6_NF_MATCH_RT=y
> CONFIG_IP6_NF_MATCH_OPTS=y
> CONFIG_IP6_NF_MATCH_FRAG=y
> CONFIG_IP6_NF_MATCH_HL=y
> CONFIG_IP6_NF_MATCH_MULTIPORT=y
> CONFIG_IP6_NF_MATCH_OWNER=y
> CONFIG_IP6_NF_MATCH_MARK=y
> CONFIG_IP6_NF_MATCH_IPV6HEADER=y
> CONFIG_IP6_NF_MATCH_AHESP=y
> CONFIG_IP6_NF_MATCH_LENGTH=y
> CONFIG_IP6_NF_MATCH_EUI64=y
> CONFIG_IP6_NF_FILTER=y
> # CONFIG_IP6_NF_TARGET_LOG is not set
> # CONFIG_IP6_NF_MANGLE is not set
> CONFIG_XFRM=y
> # CONFIG_XFRM_USER is not set
>
> #
> # SCTP Configuration (EXPERIMENTAL)
> #
> CONFIG_IPV6_SCTP__=y
> # CONFIG_IP_SCTP is not set
> # CONFIG_ATM is not set
> # CONFIG_VLAN_8021Q is not set
> # CONFIG_LLC2 is not set
> # CONFIG_IPX is not set
> # CONFIG_ATALK is not set
> # CONFIG_X25 is not set
> # CONFIG_LAPB is not set
> # CONFIG_NET_DIVERT is not set
> # CONFIG_ECONET is not set
> # CONFIG_WAN_ROUTER is not set
> # CONFIG_NET_FASTROUTE is not set
> # CONFIG_NET_HW_FLOWCONTROL is not set
>
> #
> # QoS and/or fair queueing
> #
> # CONFIG_NET_SCHED is not set
>
> #
> # Network testing
> #
> # CONFIG_NET_PKTGEN is not set
> CONFIG_NETDEVICES=y
>
> #
> # ARCnet devices
> #
> # CONFIG_ARCNET is not set
> # CONFIG_DUMMY is not set
> # CONFIG_BONDING is not set
> # CONFIG_EQUALIZER is not set
> # CONFIG_TUN is not set
>
> #
> # Ethernet (10 or 100Mbit)
> #
> # CONFIG_NET_ETHERNET is not set
>
> #
> # Ethernet (1000 Mbit)
> #
> # CONFIG_ACENIC is not set
> # CONFIG_DL2K is not set
> # CONFIG_E1000 is not set
> # CONFIG_NS83820 is not set
> # CONFIG_HAMACHI is not set
> # CONFIG_YELLOWFIN is not set
> # CONFIG_R8169 is not set
> # CONFIG_SIS190 is not set
> # CONFIG_SK98LIN is not set
> CONFIG_TIGON3=y
>
> #
> # Ethernet (10000 Mbit)
> #
> # CONFIG_IXGB is not set
> # CONFIG_FDDI is not set
> # CONFIG_HIPPI is not set
> # CONFIG_PLIP is not set
> # CONFIG_PPP is not set
> # CONFIG_SLIP is not set
>
> #
> # Wireless LAN (non-hamradio)
> #
> # CONFIG_NET_RADIO is not set
>
> #
> # Token Ring devices
> #
> # CONFIG_TR is not set
> # CONFIG_NET_FC is not set
> # CONFIG_SHAPER is not set
>
> #
> # Wan interfaces
> #
> # CONFIG_WAN is not set
>
> #
> # Amateur Radio support
> #
> # CONFIG_HAMRADIO is not set
>
> #
> # IrDA (infrared) support
> #
> # CONFIG_IRDA is not set
>
> #
> # Bluetooth support
> #
> # CONFIG_BT is not set
>
> #
> # ISDN subsystem
> #
> # CONFIG_ISDN_BOOL is not set
>
> #
> # Input device support
> #
> CONFIG_INPUT=y
>
> #
> # Userland interfaces
> #
> CONFIG_INPUT_MOUSEDEV=y
> CONFIG_INPUT_MOUSEDEV_PSAUX=y
> CONFIG_INPUT_MOUSEDEV_SCREEN_X=1600
> CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1200
> # CONFIG_INPUT_JOYDEV is not set
> # CONFIG_INPUT_TSDEV is not set
> CONFIG_INPUT_EVDEV=y
> # CONFIG_INPUT_EVBUG is not set
>
> #
> # Input I/O drivers
> #
> # CONFIG_GAMEPORT is not set
> CONFIG_SOUND_GAMEPORT=y
> CONFIG_SERIO=y
> CONFIG_SERIO_I8042=y
> # CONFIG_SERIO_SERPORT is not set
> # CONFIG_SERIO_CT82C710 is not set
> # CONFIG_SERIO_PARKBD is not set
> # CONFIG_SERIO_PCIPS2 is not set
>
> #
> # Input Device Drivers
> #
> CONFIG_INPUT_KEYBOARD=y
> CONFIG_KEYBOARD_ATKBD=y
> # CONFIG_KEYBOARD_SUNKBD is not set
> # CONFIG_KEYBOARD_XTKBD is not set
> # CONFIG_KEYBOARD_NEWTON is not set
> # CONFIG_INPUT_MOUSE is not set
> # CONFIG_INPUT_JOYSTICK is not set
> # CONFIG_INPUT_TOUCHSCREEN is not set
> CONFIG_INPUT_MISC=y
> CONFIG_INPUT_PCSPKR=y
> # CONFIG_INPUT_UINPUT is not set
>
> #
> # Character devices
> #
> CONFIG_VT=y
> CONFIG_VT_CONSOLE=y
> CONFIG_HW_CONSOLE=y
> # CONFIG_SERIAL_NONSTANDARD is not set
>
> #
> # Serial drivers
> #
> CONFIG_SERIAL_8250=y
> CONFIG_SERIAL_8250_CONSOLE=y
> # CONFIG_SERIAL_8250_ACPI is not set
> CONFIG_SERIAL_8250_NR_UARTS=4
> # CONFIG_SERIAL_8250_EXTENDED is not set
>
> #
> # Non-8250 serial port support
> #
> CONFIG_SERIAL_CORE=y
> CONFIG_SERIAL_CORE_CONSOLE=y
> CONFIG_UNIX98_PTYS=y
> CONFIG_UNIX98_PTY_COUNT=256
> # CONFIG_PRINTER is not set
> # CONFIG_PPDEV is not set
> # CONFIG_TIPAR is not set
>
> #
> # I2C support
> #
> CONFIG_I2C=y
> CONFIG_I2C_CHARDEV=y
>
> #
> # I2C Algorithms
> #
> # CONFIG_I2C_ALGOBIT is not set
> # CONFIG_I2C_ALGOPCF is not set
>
> #
> # I2C Hardware Bus support
> #
> # CONFIG_I2C_ALI1535 is not set
> # CONFIG_I2C_ALI15X3 is not set
> # CONFIG_I2C_AMD756 is not set
> CONFIG_I2C_AMD8111=y
> # CONFIG_I2C_I801 is not set
> # CONFIG_I2C_NFORCE2 is not set
> # CONFIG_I2C_SIS5595 is not set
> # CONFIG_I2C_SIS630 is not set
> # CONFIG_I2C_SIS96X is not set
> # CONFIG_I2C_VIAPRO is not set
>
> #
> # I2C Hardware Sensors Chip support
> #
> CONFIG_I2C_SENSOR=y
> CONFIG_SENSORS_ADM1021=y
> # CONFIG_SENSORS_EEPROM is not set
> # CONFIG_SENSORS_IT87 is not set
> # CONFIG_SENSORS_LM75 is not set
> # CONFIG_SENSORS_LM78 is not set
> # CONFIG_SENSORS_LM85 is not set
> # CONFIG_SENSORS_VIA686A is not set
> # CONFIG_SENSORS_W83781D is not set
>
> #
> # Mice
> #
> # CONFIG_BUSMOUSE is not set
> # CONFIG_QIC02_TAPE is not set
>
> #
> # IPMI
> #
> CONFIG_IPMI_HANDLER=y
> # CONFIG_IPMI_PANIC_EVENT is not set
> CONFIG_IPMI_DEVICE_INTERFACE=y
> CONFIG_IPMI_KCS=y
> CONFIG_IPMI_WATCHDOG=y
>
> #
> # Watchdog Cards
> #
> CONFIG_WATCHDOG=y
> # CONFIG_WATCHDOG_NOWAYOUT is not set
> # CONFIG_SOFT_WATCHDOG is not set
> # CONFIG_WDT is not set
> # CONFIG_WDTPCI is not set
> # CONFIG_PCWATCHDOG is not set
> # CONFIG_ACQUIRE_WDT is not set
> # CONFIG_ADVANTECH_WDT is not set
> # CONFIG_EUROTECH_WDT is not set
> # CONFIG_IB700_WDT is not set
> # CONFIG_I810_TCO is not set
> # CONFIG_MIXCOMWD is not set
> # CONFIG_SCx200_WDT is not set
> # CONFIG_60XX_WDT is not set
> # CONFIG_W83877F_WDT is not set
> # CONFIG_MACHZ_WDT is not set
> # CONFIG_SC520_WDT is not set
> CONFIG_AMD7XX_TCO=y
> # CONFIG_ALIM7101_WDT is not set
> # CONFIG_ALIM1535_WDT is not set
> # CONFIG_SC1200_WDT is not set
> # CONFIG_WAFER_WDT is not set
> # CONFIG_CPU5_WDT is not set
> CONFIG_HW_RANDOM=y
> # CONFIG_NVRAM is not set
> CONFIG_RTC=y
> # CONFIG_DTLK is not set
> # CONFIG_R3964 is not set
> # CONFIG_APPLICOM is not set
>
> #
> # Ftape, the floppy tape device driver
> #
> CONFIG_AGP=y
> CONFIG_AGP_AMD64=y
> CONFIG_DRM=y
> # CONFIG_DRM_TDFX is not set
> # CONFIG_DRM_GAMMA is not set
> # CONFIG_DRM_R128 is not set
> # CONFIG_DRM_RADEON is not set
> CONFIG_DRM_MGA=y
> # CONFIG_DRM_SIS is not set
> # CONFIG_MWAVE is not set
> # CONFIG_RAW_DRIVER is not set
> CONFIG_HANGCHECK_TIMER=y
>
> #
> # Misc devices
> #
>
> #
> # Multimedia devices
> #
> # CONFIG_VIDEO_DEV is not set
>
> #
> # Digital Video Broadcasting Devices
> #
> # CONFIG_DVB is not set
>
> #
> # File systems
> #
> CONFIG_EXT2_FS=y
> CONFIG_EXT2_FS_XATTR=y
> CONFIG_EXT2_FS_POSIX_ACL=y
> CONFIG_EXT2_FS_SECURITY=y
> CONFIG_EXT3_FS=y
> CONFIG_EXT3_FS_XATTR=y
> CONFIG_EXT3_FS_POSIX_ACL=y
> CONFIG_EXT3_FS_SECURITY=y
> CONFIG_JBD=y
> # CONFIG_JBD_DEBUG is not set
> CONFIG_FS_MBCACHE=y
> # CONFIG_REISERFS_FS is not set
> # CONFIG_JFS_FS is not set
> CONFIG_FS_POSIX_ACL=y
> # CONFIG_XFS_FS is not set
> # CONFIG_MINIX_FS is not set
> # CONFIG_ROMFS_FS is not set
> # CONFIG_QUOTA is not set
> # CONFIG_AUTOFS_FS is not set
> CONFIG_AUTOFS4_FS=y
>
> #
> # CD-ROM/DVD Filesystems
> #
> CONFIG_ISO9660_FS=y
> CONFIG_JOLIET=y
> CONFIG_ZISOFS=y
> CONFIG_ZISOFS_FS=y
> CONFIG_UDF_FS=y
>
> #
> # DOS/FAT/NT Filesystems
> #
> CONFIG_FAT_FS=y
> CONFIG_MSDOS_FS=y
> CONFIG_VFAT_FS=y
> # CONFIG_NTFS_FS is not set
>
> #
> # Pseudo filesystems
> #
> CONFIG_PROC_FS=y
> CONFIG_PROC_KCORE=y
> # CONFIG_DEVFS_FS is not set
> CONFIG_DEVPTS_FS=y
> # CONFIG_DEVPTS_FS_XATTR is not set
> CONFIG_TMPFS=y
> # CONFIG_HUGETLBFS is not set
> # CONFIG_HUGETLB_PAGE is not set
> CONFIG_RAMFS=y
>
> #
> # Miscellaneous filesystems
> #
> # CONFIG_ADFS_FS is not set
> # CONFIG_AFFS_FS is not set
> # CONFIG_HFS_FS is not set
> # CONFIG_BEFS_FS is not set
> # CONFIG_BFS_FS is not set
> # CONFIG_EFS_FS is not set
> # CONFIG_CRAMFS is not set
> # CONFIG_VXFS_FS is not set
> # CONFIG_HPFS_FS is not set
> # CONFIG_QNX4FS_FS is not set
> # CONFIG_SYSV_FS is not set
> # CONFIG_UFS_FS is not set
>
> #
> # Network File Systems
> #
> # CONFIG_NFS_FS is not set
> # CONFIG_NFSD is not set
> # CONFIG_EXPORTFS is not set
> # CONFIG_SMB_FS is not set
> # CONFIG_CIFS is not set
> # CONFIG_NCP_FS is not set
> # CONFIG_CODA_FS is not set
> # CONFIG_INTERMEZZO_FS is not set
> # CONFIG_AFS_FS is not set
>
> #
> # Partition Types
> #
> # CONFIG_PARTITION_ADVANCED is not set
> CONFIG_MSDOS_PARTITION=y
> CONFIG_NLS=y
>
> #
> # Native Language Support
> #
> CONFIG_NLS_DEFAULT="iso8859-1"
> # CONFIG_NLS_CODEPAGE_437 is not set
> # CONFIG_NLS_CODEPAGE_737 is not set
> # CONFIG_NLS_CODEPAGE_775 is not set
> # CONFIG_NLS_CODEPAGE_850 is not set
> # CONFIG_NLS_CODEPAGE_852 is not set
> # CONFIG_NLS_CODEPAGE_855 is not set
> # CONFIG_NLS_CODEPAGE_857 is not set
> # CONFIG_NLS_CODEPAGE_860 is not set
> # CONFIG_NLS_CODEPAGE_861 is not set
> # CONFIG_NLS_CODEPAGE_862 is not set
> # CONFIG_NLS_CODEPAGE_863 is not set
> # CONFIG_NLS_CODEPAGE_864 is not set
> # CONFIG_NLS_CODEPAGE_865 is not set
> # CONFIG_NLS_CODEPAGE_866 is not set
> # CONFIG_NLS_CODEPAGE_869 is not set
> # CONFIG_NLS_CODEPAGE_936 is not set
> # CONFIG_NLS_CODEPAGE_950 is not set
> # CONFIG_NLS_CODEPAGE_932 is not set
> # CONFIG_NLS_CODEPAGE_949 is not set
> # CONFIG_NLS_CODEPAGE_874 is not set
> # CONFIG_NLS_ISO8859_8 is not set
> # CONFIG_NLS_CODEPAGE_1250 is not set
> # CONFIG_NLS_CODEPAGE_1251 is not set
> # CONFIG_NLS_ISO8859_1 is not set
> # CONFIG_NLS_ISO8859_2 is not set
> # CONFIG_NLS_ISO8859_3 is not set
> # CONFIG_NLS_ISO8859_4 is not set
> # CONFIG_NLS_ISO8859_5 is not set
> # CONFIG_NLS_ISO8859_6 is not set
> # CONFIG_NLS_ISO8859_7 is not set
> # CONFIG_NLS_ISO8859_9 is not set
> # CONFIG_NLS_ISO8859_13 is not set
> # CONFIG_NLS_ISO8859_14 is not set
> # CONFIG_NLS_ISO8859_15 is not set
> # CONFIG_NLS_KOI8_R is not set
> # CONFIG_NLS_KOI8_U is not set
> # CONFIG_NLS_UTF8 is not set
>
> #
> # Graphics support
> #
> # CONFIG_FB is not set
> CONFIG_VIDEO_SELECT=y
>
> #
> # Console display driver support
> #
> CONFIG_VGA_CONSOLE=y
> # CONFIG_MDA_CONSOLE is not set
> CONFIG_DUMMY_CONSOLE=y
>
> #
> # Sound
> #
> CONFIG_SOUND=y
>
> #
> # Advanced Linux Sound Architecture
> #
> # CONFIG_SND is not set
>
> #
> # Open Sound System
> #
> CONFIG_SOUND_PRIME=y
> # CONFIG_SOUND_BT878 is not set
> # CONFIG_SOUND_CMPCI is not set
> # CONFIG_SOUND_EMU10K1 is not set
> # CONFIG_SOUND_FUSION is not set
> # CONFIG_SOUND_CS4281 is not set
> # CONFIG_SOUND_ES1370 is not set
> # CONFIG_SOUND_ES1371 is not set
> # CONFIG_SOUND_ESSSOLO1 is not set
> # CONFIG_SOUND_MAESTRO is not set
> # CONFIG_SOUND_MAESTRO3 is not set
> CONFIG_SOUND_ICH=y
> # CONFIG_SOUND_SONICVIBES is not set
> # CONFIG_SOUND_TRIDENT is not set
> # CONFIG_SOUND_VIA82CXXX is not set
> # CONFIG_SOUND_OSS is not set
> # CONFIG_SOUND_TVMIXER is not set
> # CONFIG_SOUND_ALI5455 is not set
> # CONFIG_SOUND_FORTE is not set
> # CONFIG_SOUND_RME96XX is not set
> # CONFIG_SOUND_AD1980 is not set
>
> #
> # USB support
> #
> CONFIG_USB=y
> # CONFIG_USB_DEBUG is not set
>
> #
> # Miscellaneous USB options
> #
> CONFIG_USB_DEVICEFS=y
> # CONFIG_USB_BANDWIDTH is not set
> # CONFIG_USB_DYNAMIC_MINORS is not set
>
> #
> # USB Host Controller Drivers
> #
> # CONFIG_USB_EHCI_HCD is not set
> CONFIG_USB_OHCI_HCD=y
> # CONFIG_USB_UHCI_HCD is not set
>
> #
> # USB Device Class drivers
> #
> # CONFIG_USB_AUDIO is not set
> # CONFIG_USB_BLUETOOTH_TTY is not set
> # CONFIG_USB_MIDI is not set
> CONFIG_USB_ACM=y
> CONFIG_USB_PRINTER=y
> CONFIG_USB_STORAGE=y
> # CONFIG_USB_STORAGE_DEBUG is not set
> # CONFIG_USB_STORAGE_DATAFAB is not set
> # CONFIG_USB_STORAGE_FREECOM is not set
> # CONFIG_USB_STORAGE_ISD200 is not set
> # CONFIG_USB_STORAGE_DPCM is not set
> # CONFIG_USB_STORAGE_HP8200e is not set
> # CONFIG_USB_STORAGE_SDDR09 is not set
> # CONFIG_USB_STORAGE_SDDR55 is not set
> # CONFIG_USB_STORAGE_JUMPSHOT is not set
>
> #
> # USB Human Interface Devices (HID)
> #
> CONFIG_USB_HID=y
> CONFIG_USB_HIDINPUT=y
> # CONFIG_HID_FF is not set
> # CONFIG_USB_HIDDEV is not set
> # CONFIG_USB_AIPTEK is not set
> CONFIG_USB_WACOM=y
> # CONFIG_USB_KBTAB is not set
> # CONFIG_USB_POWERMATE is not set
> # CONFIG_USB_XPAD is not set
>
> #
> # USB Imaging devices
> #
> # CONFIG_USB_MDC800 is not set
> CONFIG_USB_SCANNER=y
> # CONFIG_USB_MICROTEK is not set
> # CONFIG_USB_HPUSBSCSI is not set
>
> #
> # USB Multimedia devices
> #
> # CONFIG_USB_DABUSB is not set
>
> #
> # Video4Linux support is needed for USB Multimedia device support
> #
>
> #
> # USB Network adaptors
> #
> # CONFIG_USB_CATC is not set
> # CONFIG_USB_KAWETH is not set
> # CONFIG_USB_PEGASUS is not set
> # CONFIG_USB_RTL8150 is not set
> # CONFIG_USB_USBNET is not set
>
> #
> # USB port drivers
> #
> # CONFIG_USB_USS720 is not set
>
> #
> # USB Serial Converter support
> #
> # CONFIG_USB_SERIAL is not set
>
> #
> # USB Miscellaneous drivers
> #
> # CONFIG_USB_TIGL is not set
> # CONFIG_USB_AUERSWALD is not set
> # CONFIG_USB_RIO500 is not set
> # CONFIG_USB_BRLVGER is not set
> # CONFIG_USB_LCD is not set
> # CONFIG_USB_TEST is not set
> # CONFIG_USB_GADGET is not set
>
> #
> # Profiling support
> #
> CONFIG_PROFILING=y
> CONFIG_OPROFILE=y
>
> #
> # Kernel hacking
> #
> # CONFIG_DEBUG_KERNEL is not set
> CONFIG_MAGIC_SYSRQ=y
> # CONFIG_FRAME_POINTER is not set
> CONFIG_IOMMU_DEBUG=y
> CONFIG_MCE_DEBUG=y
>
> #
> # Security options
> #
> # CONFIG_SECURITY is not set
>
> #
> # Cryptographic options
> #
> CONFIG_CRYPTO=y
> CONFIG_CRYPTO_HMAC=y
> # CONFIG_CRYPTO_NULL is not set
> # CONFIG_CRYPTO_MD4 is not set
> CONFIG_CRYPTO_MD5=y
> CONFIG_CRYPTO_SHA1=y
> # CONFIG_CRYPTO_SHA256 is not set
> # CONFIG_CRYPTO_SHA512 is not set
> CONFIG_CRYPTO_DES=y
> # CONFIG_CRYPTO_BLOWFISH is not set
> # CONFIG_CRYPTO_TWOFISH is not set
> # CONFIG_CRYPTO_SERPENT is not set
> # CONFIG_CRYPTO_AES is not set
> # CONFIG_CRYPTO_CAST5 is not set
> # CONFIG_CRYPTO_CAST6 is not set
> CONFIG_CRYPTO_DEFLATE=y
> # CONFIG_CRYPTO_TEST is not set
>
> #
> # Library routines
> #
> # CONFIG_CRC32 is not set
> CONFIG_ZLIB_INFLATE=y
> CONFIG_ZLIB_DEFLATE=y
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/