[PATCH 141] Amiga NCR53c710 SCSI
From: Geert Uytterhoeven
Date: Sun Dec 07 2003 - 16:44:35 EST
Amiga NCR53c710: Coalesce all Amiga NCR53c710 SCSI host adapters configuration
options into one config option, as suggested by Matthew Wilcox.
--- linux-2.4.23/Documentation/Configure.help 2003-11-11 10:03:58.000000000 +0100
+++ linux-m68k-2.4.23/Documentation/Configure.help 2003-11-12 11:42:27.000000000 +0100
@@ -1526,12 +1526,6 @@
Say Y if you have an IDE doubler. The driver is enabled at kernel
runtime using the "ide=doubler" kernel boot parameter.
-WarpEngine SCSI support
-CONFIG_WARPENGINE_SCSI
- Support for MacroSystem Development's WarpEngine Amiga SCSI-2
- controller. Info at
- <http://www.lysator.liu.se/amiga/ar/guide/ar310.guide?FEATURE5>.
-
Builtin PowerMac IDE support
CONFIG_BLK_DEV_IDE_PMAC
This driver provides support for the built-in IDE controller on
@@ -23033,15 +23027,22 @@
"ser_a2232.o". If you want to do this, answer M here and read
"<file:Documentation/modules.txt>".
-A4000T SCSI support
-CONFIG_A4000T_SCSI
- Support for the NCR53C710 SCSI controller on the Amiga 4000T.
-
-A4091 SCSI support
-CONFIG_A4091_SCSI
- Support for the NCR53C710 chip on the Amiga 4091 Z3 SCSI2 controller
- (1993). Very obscure -- the 4091 was part of an Amiga 4000 upgrade
- plan at the time the Amiga business was sold to DKB.
+Amiga NCR53c710 SCSI support
+CONFIG_SCSI_AMIGA7XX
+ Support for various NCR53c710-based SCSI controllers on the Amiga.
+ This includes:
+ - the builtin SCSI controller on the Amiga 4000T,
+ - the Amiga 4091 Zorro III SCSI-2 controller,
+ - the MacroSystem Development's WarpEngine Amiga SCSI-2 controller
+ (info at
+ <http://www.lysator.liu.se/amiga/ar/guide/ar310.guide?FEATURE5>),
+ - the SCSI controller on the Phase5 Blizzard PowerUP 603e+
+ accelerator card for the Amiga 1200,
+ - the SCSI controller on the GVP Turbo 040/060 accelerator.
+ Note that all of the above SCSI controllers, except for the builtin
+ SCSI controller on the Amiga 4000T, reside on the Zorro expansion
+ bus, so you also have to enable Zorro bus support if you want to use
+ them.
Atari support
CONFIG_ATARI
@@ -23386,11 +23387,6 @@
1260 accelerator, and the optional SCSI module, say Y. Otherwise,
say N.
-Blizzard PowerUP 603e+ SCSI support
-CONFIG_BLZ603EPLUS_SCSI
- If you have an Amiga 1200 with a Phase5 Blizzard PowerUP 603e+
- accelerator, say Y. Otherwise, say N.
-
Fastlane SCSI support
CONFIG_FASTLANE_SCSI
If you have the Phase5 Fastlane Z3 SCSI controller, or plan to use
--- linux-2.4.23/arch/m68k/config.in 2003-08-31 10:42:53.000000000 +0200
+++ linux-m68k-2.4.23/arch/m68k/config.in 2003-11-03 21:13:02.000000000 +0100
@@ -234,7 +234,7 @@
if [ "$CONFIG_AMIGA" = "y" ]; then
dep_tristate 'A3000 WD33C93A support' CONFIG_A3000_SCSI $CONFIG_SCSI
if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
- bool 'A4000T SCSI support (EXPERIMENTAL)' CONFIG_A4000T_SCSI
+ bool 'Amiga NCR53c710 SCSI support (EXPERIMENTAL)' CONFIG_SCSI_AMIGA7XX
fi
fi
if [ "$CONFIG_ZORRO" = "y" ]; then
@@ -246,12 +246,8 @@
dep_tristate 'Blizzard 1230IV/1260 SCSI support' CONFIG_BLZ1230_SCSI $CONFIG_SCSI
dep_tristate 'Fastlane SCSI support' CONFIG_FASTLANE_SCSI $CONFIG_SCSI
if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
- bool 'A4091 SCSI support (EXPERIMENTAL)' CONFIG_A4091_SCSI
- bool 'WarpEngine SCSI support (EXPERIMENTAL)' CONFIG_WARPENGINE_SCSI
- bool 'Blizzard PowerUP 603e+ SCSI (EXPERIMENTAL)' CONFIG_BLZ603EPLUS_SCSI
dep_tristate 'BSC Oktagon SCSI support (EXPERIMENTAL)' CONFIG_OKTAGON_SCSI $CONFIG_SCSI
# bool 'Cyberstorm Mk III SCSI support (EXPERIMENTAL)' CONFIG_CYBERSTORMIII_SCSI
-# bool 'GVP Turbo 040/060 SCSI support (EXPERIMENTAL)' CONFIG_GVP_TURBO_SCSI
fi
fi
if [ "$CONFIG_ATARI" = "y" ]; then
--- linux-2.4.23/drivers/scsi/Config.in 2003-10-10 12:14:17.000000000 +0200
+++ linux-m68k-2.4.23/drivers/scsi/Config.in 2003-11-03 21:07:54.000000000 +0100
@@ -237,7 +237,7 @@
if [ "$CONFIG_AMIGA" = "y" ]; then
dep_tristate 'A3000 WD33C93A support' CONFIG_A3000_SCSI $CONFIG_SCSI
if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
- bool 'A4000T SCSI support (EXPERIMENTAL)' CONFIG_A4000T_SCSI
+ bool 'Amiga NCR53c710 SCSI support (EXPERIMENTAL)' CONFIG_SCSI_AMIGA7XX
fi
fi
if [ "$CONFIG_ZORRO" = "y" ]; then
@@ -249,12 +249,8 @@
dep_tristate 'Blizzard 1230IV/1260 SCSI support' CONFIG_BLZ1230_SCSI $CONFIG_SCSI
dep_tristate 'Fastlane SCSI support' CONFIG_FASTLANE_SCSI $CONFIG_SCSI
if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
- bool 'A4091 SCSI support (EXPERIMENTAL)' CONFIG_A4091_SCSI
- bool 'WarpEngine SCSI support (EXPERIMENTAL)' CONFIG_WARPENGINE_SCSI
- bool 'Blizzard PowerUP 603e+ SCSI (EXPERIMENTAL)' CONFIG_BLZ603EPLUS_SCSI
dep_tristate 'BSC Oktagon SCSI support (EXPERIMENTAL)' CONFIG_OKTAGON_SCSI $CONFIG_SCSI
# bool 'Cyberstorm Mk III SCSI support (EXPERIMENTAL)' CONFIG_CYBERSTORMIII_SCSI
-# bool 'GVP Turbo 040/060 SCSI support (EXPERIMENTAL)' CONFIG_GVP_TURBO_SCSI
fi
fi
--- linux-2.4.23/drivers/scsi/Makefile 2003-10-10 12:14:17.000000000 +0200
+++ linux-m68k-2.4.23/drivers/scsi/Makefile 2003-11-03 21:08:34.000000000 +0100
@@ -33,10 +33,7 @@
obj-$(CONFIG_SCSI) += scsi_mod.o
-obj-$(CONFIG_A4000T_SCSI) += amiga7xx.o 53c7xx.o
-obj-$(CONFIG_A4091_SCSI) += amiga7xx.o 53c7xx.o
-obj-$(CONFIG_BLZ603EPLUS_SCSI) += amiga7xx.o 53c7xx.o
-obj-$(CONFIG_WARPENGINE_SCSI) += amiga7xx.o 53c7xx.o
+obj-$(CONFIG_SCSI_AMIGA7XX) += amiga7xx.o 53c7xx.o
obj-$(CONFIG_A3000_SCSI) += a3000.o wd33c93.o
obj-$(CONFIG_A2091_SCSI) += a2091.o wd33c93.o
obj-$(CONFIG_GVP11_SCSI) += gvp11.o wd33c93.o
--- linux-2.4.23/drivers/scsi/amiga7xx.c 2003-11-03 22:46:01.000000000 +0100
+++ linux-m68k-2.4.23/drivers/scsi/amiga7xx.c 2003-11-03 21:41:22.000000000 +0100
@@ -1,6 +1,6 @@
/*
* Detection routine for the NCR53c710 based Amiga SCSI Controllers for Linux.
- * Amiga MacroSystemUS WarpEngine SCSI controller.
+ * Amiga MacroSystemUS WarpEngine SCSI controller.
* Amiga Technologies A4000T SCSI controller.
* Amiga Technologies/DKB A4091 SCSI controller.
*
@@ -14,13 +14,13 @@
#include <linux/version.h>
#include <linux/config.h>
#include <linux/zorro.h>
+#include <linux/stat.h>
#include <asm/setup.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/amigaints.h>
#include <asm/amigahw.h>
-
#include <asm/irq.h>
#include "scsi.h"
@@ -28,104 +28,83 @@
#include "53c7xx.h"
#include "amiga7xx.h"
-#include<linux/stat.h>
-
-int __init amiga7xx_detect(Scsi_Host_Template *tpnt)
+static int amiga7xx_register_one(Scsi_Host_Template *tpnt,
+ unsigned long address)
{
- static unsigned char called = 0;
- int num = 0, clock;
long long options;
- struct zorro_dev *z = NULL;
- unsigned long address;
+ int clock;
- if (called || !MACH_IS_AMIGA)
+ if (!request_mem_region(address, 0x1000, "ncr53c710"))
return 0;
- tpnt->proc_name = "Amiga7xx";
+ address = (unsigned long)z_ioremap(address, 0x1000);
+ options = OPTION_MEMORY_MAPPED | OPTION_DEBUG_TEST1 | OPTION_INTFLY |
+ OPTION_SYNCHRONOUS | OPTION_ALWAYS_SYNCHRONOUS |
+ OPTION_DISCONNECT;
+ clock = 50000000; /* 50 MHz SCSI Clock */
+ ncr53c7xx_init(tpnt, 0, 710, address, 0, IRQ_AMIGA_PORTS, DMA_NONE,
+ options, clock);
+ return 1;
+}
-#ifdef CONFIG_A4000T_SCSI
- if (AMIGAHW_PRESENT(A4000_SCSI)) {
- address = 0xdd0040;
- if (request_mem_region(address, 0x1000, "ncr53c710")) {
- address = ZTWO_VADDR(address);
- options = OPTION_MEMORY_MAPPED | OPTION_DEBUG_TEST1 |
- OPTION_INTFLY | OPTION_SYNCHRONOUS |
- OPTION_ALWAYS_SYNCHRONOUS | OPTION_DISCONNECT;
- clock = 50000000; /* 50MHz SCSI Clock */
- ncr53c7xx_init(tpnt, 0, 710, address, 0, IRQ_AMIGA_PORTS, DMA_NONE,
- options, clock);
- num++;
- }
- }
-#endif
+
+#ifdef CONFIG_ZORRO
+
+static struct {
+ zorro_id id;
+ unsigned long offset;
+ int absolute; /* offset is absolute address */
+} amiga7xx_table[] = {
+ { .id = ZORRO_PROD_PHASE5_BLIZZARD_603E_PLUS, .offset = 0xf40000,
+ .absolute = 1 },
+ { .id = ZORRO_PROD_MACROSYSTEMS_WARP_ENGINE_40xx, .offset = 0x40000 },
+ { .id = ZORRO_PROD_CBM_A4091_1, .offset = 0x800000 },
+ { .id = ZORRO_PROD_CBM_A4091_2, .offset = 0x800000 },
+ { .id = ZORRO_PROD_GVP_GFORCE_040_060, .offset = 0x40000 },
+ { 0 }
+};
+
+static int __init amiga7xx_zorro_detect(Scsi_Host_Template *tpnt)
+{
+ int num = 0, i;
+ struct zorro_dev *z = NULL;
+ unsigned long address;
while ((z = zorro_find_device(ZORRO_WILDCARD, z))) {
- unsigned long address = z->resource.start;
- unsigned long size = z->resource.end-z->resource.start+1;
- switch (z->id) {
-#ifdef CONFIG_BLZ603EPLUS_SCSI
- case ZORRO_PROD_PHASE5_BLIZZARD_603E_PLUS:
- address = 0xf40000;
- if (request_mem_region(address, 0x1000, "ncr53c710")) {
- address = ZTWO_VADDR(address);
- options = OPTION_MEMORY_MAPPED | OPTION_DEBUG_TEST1 |
- OPTION_INTFLY | OPTION_SYNCHRONOUS |
- OPTION_ALWAYS_SYNCHRONOUS | OPTION_DISCONNECT;
- clock = 50000000; /* 50MHz SCSI Clock */
- ncr53c7xx_init(tpnt, 0, 710, address, 0, IRQ_AMIGA_PORTS,
- DMA_NONE, options, clock);
- num++;
- }
+ for (i = 0; amiga7xx_table[i].id; i++)
+ if (z->id == amiga7xx_table[i].id)
break;
-#endif
+ if (!amiga7xx_table[i].id)
+ continue;
+ if (amiga7xx_table[i].absolute)
+ address = amiga7xx_table[i].offset;
+ else
+ address = z->resource.start + amiga7xx_table[i].offset;
+ num += amiga7xx_register_one(tpnt, address);
+ }
+ return num;
+}
-#ifdef CONFIG_WARPENGINE_SCSI
- case ZORRO_PROD_MACROSYSTEMS_WARP_ENGINE_40xx:
- if (request_mem_region(address+0x40000, 0x1000, "ncr53c710")) {
- address = (unsigned long)z_ioremap(address, size);
- options = OPTION_MEMORY_MAPPED | OPTION_DEBUG_TEST1 |
- OPTION_INTFLY | OPTION_SYNCHRONOUS |
- OPTION_ALWAYS_SYNCHRONOUS | OPTION_DISCONNECT;
- clock = 50000000; /* 50MHz SCSI Clock */
- ncr53c7xx_init(tpnt, 0, 710, address+0x40000, 0,
- IRQ_AMIGA_PORTS, DMA_NONE, options, clock);
- num++;
- }
- break;
-#endif
+#endif /* CONFIG_ZORRO */
-#ifdef CONFIG_A4091_SCSI
- case ZORRO_PROD_CBM_A4091_1:
- case ZORRO_PROD_CBM_A4091_2:
- if (request_mem_region(address+0x800000, 0x1000, "ncr53c710")) {
- address = (unsigned long)z_ioremap(address, size);
- options = OPTION_MEMORY_MAPPED | OPTION_DEBUG_TEST1 |
- OPTION_INTFLY | OPTION_SYNCHRONOUS |
- OPTION_ALWAYS_SYNCHRONOUS | OPTION_DISCONNECT;
- clock = 50000000; /* 50MHz SCSI Clock */
- ncr53c7xx_init(tpnt, 0, 710, address+0x800000, 0,
- IRQ_AMIGA_PORTS, DMA_NONE, options, clock);
- num++;
- }
- break;
-#endif
-#ifdef CONFIG_GVP_TURBO_SCSI
- case ZORRO_PROD_GVP_GFORCE_040_060:
- if (request_mem_region(address+0x40000, 0x1000, "ncr53c710")) {
- address = ZTWO_VADDR(address);
- options = OPTION_MEMORY_MAPPED | OPTION_DEBUG_TEST1 |
- OPTION_INTFLY | OPTION_SYNCHRONOUS |
- OPTION_ALWAYS_SYNCHRONOUS | OPTION_DISCONNECT;
- clock = 50000000; /* 50MHz SCSI Clock */
- ncr53c7xx_init(tpnt, 0, 710, address+0x40000, 0,
- IRQ_AMIGA_PORTS, DMA_NONE, options, clock);
- num++;
- }
+int __init amiga7xx_detect(Scsi_Host_Template *tpnt)
+{
+ static unsigned char called = 0;
+ int num = 0;
+
+ if (called || !MACH_IS_AMIGA)
+ return 0;
+
+ tpnt->proc_name = "Amiga7xx";
+
+ if (AMIGAHW_PRESENT(A4000_SCSI))
+ num += amiga7xx_register_one(tpnt, 0xdd0040);
+
+#ifdef CONFIG_ZORRO
+ num += amiga7xx_zorro_detect(tpnt);
#endif
- }
- }
called = 1;
return num;
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/