Re: Not able to load megaraid module after kernel upgrade from 2.4.9-e2 to 2.4.9-e25

[Matt Domsch]

> Hello I am running dell Power Edge 12600, with Firmware 1.68,
> I have a Perc 4/Si RAID Controller BIOS version 1.04 FW 2.27 (the last 
> version)
> When starting up, the bios can recognize the disk array with no problem, the 
> server starts booting OK, but when it gets to load the megaraid module, it 
> brakes:

The Linux-PowerEdge@xxxxxxxx list may be more appropriate for this
type of question.  Subscribe at http://lists.us.dell.com/.

For the Red Hat kernel you mention, you want /etc/modules to list the
megaraid_2002 driver, not plain megaraid.  Then remake your initial
ramdisk such that the megaraid_2002 driver gets picked up and used at
next boot.

Thanks,
Matt

-- 
Matt Domsch
Sr. Software Engineer, Lead Engineer
Dell Linux Solutions www.dell.com/linux
Linux on Dell mailing lists @ http://lists.us.dell.com
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/