PROBLEM
From: Federico Freire
Date: Fri Dec 19 2003 - 13:09:14 EST
This is my first bug reporting so sorry if I give you the wrong information...
and sorry for my english.
I have a CREATIVE CD-RW 8432 and I get an error when I try to use it aprox 10
minutes after I boot... I can't mount it, or record, etc. When I do dmesg I
get this over and over again:
hdc: lost interrupt
hdc: cdrom_pc_intr: The drive appears confused (ireason = 0x01)
I googled but I didn't find anything about this...
This is the output of ver_linux:
--------------------------------------------
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
Linux GentooBox 2.6.0-gentoo #4 SMP Fri Dec 19 01:21:16 ART 2003 i686 AMD
Athlon(tm) XP 2400+ AuthenticAMD GNU/Linux
Gnu C 3.2.3
Gnu make 3.80
util-linux 2.11z
mount 2.11z
module-init-tools 0.9.12
e2fsprogs 1.33
PPP 2.4.1
Linux C Library 2.3.2
Dynamic linker (ldd) 2.3.2
Procps 3.1.12
Net-tools 1.60
Kbd 1.06
Sh-utils 5.0
Modules Loaded snd_seq_midi snd_emu10k1_synth snd_emux_synth
snd_seq_virmidi snd_seq_midi_emul snd_emu10k1 snd_rawmidi snd_ac97_codec
snd_util_mem snd_hwdep snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device
snd_pcm_oss snd_pcm snd_page_alloc snd_timer snd_mixer_oss snd soundcore rtc
nls_iso8859_1 ntfs w83781d eeprom i2c_isa i2c_sensor i2c_dev i2c_core
quickcam videodev hid ehci_hcd uhci_hcd usbcore nvidia 8139too ide_cd cdrom
-------------------------------
I've been using kernel-2.6 since test10 and the bug is there since I tried
it...
I've dma enabled but when I disabled it I get the same error..
This is my dmesg:
------------------------------------
Calibrating delay loop... 3858.43 BogoMIPS
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
checking if image is initramfs...it isn't (ungzip failed); looks like an
initrd
Freeing initrd memory: 40k freed
CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000
CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000
CPU: CLK_CTL MSR was 6003d22f. Reprogramming to 2003d22f
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000020
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
CPU0: AMD Athlon(tm) XP 2400+ stepping 01
per-CPU timeslice cutoff: 731.41 usecs.
task migration cache decay timeout: 1 msecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000080
ESR value after enabling vector: 00000000
Total of 1 processors activated (3858.43 BogoMIPS).
ENABLING IO-APIC IRQs
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not
connected.
..TIMER: vector=0x31 pin1=2 pin2=-1
number of MP IRQ sources: 15.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 00178003
....... : max redirection entries: 0017
....... : PRQ implemented: 1
....... : IO APIC version: 0003
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 001 01 0 0 0 0 0 1 1 39
02 001 01 0 0 0 0 0 1 1 31
03 001 01 0 0 0 0 0 1 1 41
04 001 01 0 0 0 0 0 1 1 49
05 001 01 0 0 0 0 0 1 1 51
06 001 01 0 0 0 0 0 1 1 59
07 001 01 0 0 0 0 0 1 1 61
08 001 01 0 0 0 0 0 1 1 69
09 001 01 1 1 0 1 0 1 1 71
0a 001 01 0 0 0 0 0 1 1 79
0b 001 01 0 0 0 0 0 1 1 81
0c 001 01 0 0 0 0 0 1 1 89
0d 001 01 0 0 0 0 0 1 1 91
0e 001 01 0 0 0 0 0 1 1 99
0f 001 01 0 0 0 0 0 1 1 A1
10 000 00 1 0 0 0 0 0 0 00
11 000 00 1 0 0 0 0 0 0 00
12 000 00 1 0 0 0 0 0 0 00
13 000 00 1 0 0 0 0 0 0 00
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1960.0714 MHz.
..... host bus clock speed is 340.0993 MHz.
Starting migration thread for cpu 0
CPUS done 8
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20031002
IOAPIC[0]: Set PCI routing entry (2-9 -> 0x71 -> IRQ 9 Mode:1 Active:1)
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Power Resource [URP1] (off)
ACPI: Power Resource [URP2] (off)
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [LPTP] (off)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 *12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
IOAPIC[0]: Set PCI routing entry (2-16 -> 0xa9 -> IRQ 16 Mode:1 Active:1)
00:00:01[A] -> 2-16 -> IRQ 16
IOAPIC[0]: Set PCI routing entry (2-17 -> 0xb1 -> IRQ 17 Mode:1 Active:1)
00:00:01[B] -> 2-17 -> IRQ 17
IOAPIC[0]: Set PCI routing entry (2-22 -> 0xb9 -> IRQ 22 Mode:1 Active:1)
00:00:11[C] -> 2-22 -> IRQ 22
Pin 2-16 already programmed
Pin 2-17 already programmed
IOAPIC[0]: Set PCI routing entry (2-18 -> 0xc1 -> IRQ 18 Mode:1 Active:1)
00:00:05[C] -> 2-18 -> IRQ 18
IOAPIC[0]: Set PCI routing entry (2-19 -> 0xc9 -> IRQ 19 Mode:1 Active:1)
00:00:05[D] -> 2-19 -> IRQ 19
Pin 2-17 already programmed
Pin 2-18 already programmed
Pin 2-19 already programmed
Pin 2-16 already programmed
Pin 2-18 already programmed
Pin 2-19 already programmed
Pin 2-16 already programmed
Pin 2-17 already programmed
Pin 2-19 already programmed
Pin 2-16 already programmed
Pin 2-17 already programmed
Pin 2-18 already programmed
Pin 2-17 already programmed
Pin 2-18 already programmed
Pin 2-19 already programmed
Pin 2-16 already programmed
Pin 2-18 already programmed
Pin 2-19 already programmed
Pin 2-16 already programmed
Pin 2-17 already programmed
IOAPIC[0]: Set PCI routing entry (2-21 -> 0xd1 -> IRQ 21 Mode:1 Active:1)
00:00:10[A] -> 2-21 -> IRQ 21
Pin 2-21 already programmed
Pin 2-21 already programmed
Pin 2-21 already programmed
IOAPIC[0]: Set PCI routing entry (2-23 -> 0xd9 -> IRQ 23 Mode:1 Active:1)
00:00:12[A] -> 2-23 -> IRQ 23
Pin 2-18 already programmed
ACPI: No IRQ known for interrupt pin A of device 0000:00:11.1 - using IRQ 255
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even
'acpi=off'
vesafb: framebuffer at 0xd0000000, mapped to 0xd080b000, size 16384k
vesafb: mode is 1024x768x16, linelength=2048, pages=0
vesafb: protected mode interface info at c000:0f3e
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
fb0: VESA VGA frame buffer device
Machine check exception polling timer started.
devfs: v1.22 (20021013) Richard Gooch (rgooch@xxxxxxxxxxxxx)
devfs: boot_options: 0x1
Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
udf: registering filesystem
PCI: Via IRQ fixup for 0000:00:10.1, from 10 to 5
PCI: Via IRQ fixup for 0000:00:10.0, from 11 to 5
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Processor [CPU1] (supports C1, 16 throttling states)
bootsplash 3.1.3-2003/11/14: looking for picture.... silentjpeg size 21768
bytes, found (1024x768, 20089 bytes, v3).
Console: switching to colour frame buffer device 122x40
pty: 256 Unix98 ptys configured
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected VIA KT266/KY266x/KT333 chipset
agpgart: Maximum main memory to use for agp memory: 203M
agpgart: AGP aperture is 128M @ 0xe0000000
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Using anticipatory io scheduler
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:11.1
ACPI: No IRQ known for interrupt pin A of device 0000:00:11.1 - using IRQ 255
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
hda: Maxtor 6E040L0, ATA DISK drive
hdb: SAMSUNG SV2044D, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: CREATIVE CD-RW RW8435E, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 80293248 sectors (41110 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(133)
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3
hdb: max request size: 128KiB
hdb: 39862368 sectors (20409 MB) w/472KiB Cache, CHS=39546/16/63, UDMA(66)
/dev/ide/host0/bus0/target1/lun0: p1
Console: switching to colour frame buffer device 122x40
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
input: AT Translated Set 2 keyboard on isa0060/serio0
serio: i8042 KBD port at 0x60,0x64 irq 1
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S1 S4 S5)
RAMDISK: Couldn't find valid RAM disk image starting at 0.
found reiserfs format "3.6" with standard journal
Reiserfs journal params: device hda3, size 8192, journal first block 18, max
trans len 1024, max batch 900, max commit age 30, max trans age 30
reiserfs: checking transaction log (hda3) for (hda3)
Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 168k freed
Adding 248996k swap on /dev/hda2. Priority:-1 extents:1
hdc: ATAPI 32X CD-ROM CD-R/RW drive, 4096kB Cache, DMA
Uniform CD-ROM driver Revision: 3.12
8139too Fast Ethernet driver 0.9.26
eth0: RealTek RTL8139 at 0xd1a95f00, 00:e0:7d:db:05:59, IRQ 17
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
nvidia: no version magic, tainting kernel.
nvidia: module license 'NVIDIA' taints kernel.
0: nvidia: loading NVIDIA Linux x86 nvidia.o Kernel Module 1.0-4496 Wed Jul
16 19:03:09 PDT 2003
drivers/usb/core/usb.c: registered new driver usbfs
drivers/usb/core/usb.c: registered new driver hub
drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver
v2.1
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: irq 21, io base 0000dc00
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: irq 21, io base 0000e000
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: irq 21, io base 0000e400
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ehci_hcd 0000:00:10.3: EHCI Host Controller
ehci_hcd 0000:00:10.3: irq 21, pci mem d1a97e00
ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:10.3: USB 2.0 enabled, EHCI 1.00, driver 2003-Jun-13
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
drivers/usb/core/usb.c: registered new driver hid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
Linux video capture interface: v1.00
quickcam: no version magic, tainting kernel.
quickcam [49.207223]: ----------LOADING QUICKCAM MODULE------------
quickcam [49.207228]: struct quickcam size: 5548
drivers/usb/core/usb.c: registered new driver quickcam
i2c /dev entries driver
registering 0-0290
NTFS driver 2.1.5 [Flags: R/O MODULE].
NTFS volume version 3.0.
hub 1-0:1.0: new USB device on port 1, assigned address 2
quickcam: QuickCam USB camera found (driver version QuickCam USB $Date:
2003/10/30 11:16:49 $)
Module quickcam cannot be unloaded due to unsafe usage in
include/linux/module.h:483
quickcam: Sensor HDCS-1000/1100 detected
videodev: "QuickCam USB" has no release callback. Please fix your driver for
proper sysfs support, see http://lwn.net/Articles/36850/
hub 1-0:1.0: new USB device on port 2, assigned address 3
input: USB HID v1.00 Mouse [HP HP USB WHEEL MOUSE] on usb-0000:00:10.0-2
Real Time Clock Driver v1.12
blk: queue cfc5ae00, I/O limit 4095Mb (mask 0xffffffff)
blk: queue cfc5aa00, I/O limit 4095Mb (mask 0xffffffff)
eth0: link up, 10Mbps, half-duplex, lpa 0x0000
bootsplash 3.1.3-2003/11/14: looking for picture.... found (1024x768, 20089
bytes, v3).
bootsplash: status on console 0 changed to on
bootsplash 3.1.3-2003/11/14: looking for picture.... found (1024x768, 20089
bytes, v3).
bootsplash: status on console 1 changed to on
bootsplash 3.1.3-2003/11/14: looking for picture.... found (1024x768, 20089
bytes, v3).
bootsplash: status on console 2 changed to on
bootsplash 3.1.3-2003/11/14: looking for picture.... found (1024x768, 20089
bytes, v3).
bootsplash: status on console 3 changed to on
bootsplash 3.1.3-2003/11/14: looking for picture.... found (1024x768, 20089
bytes, v3).
bootsplash: status on console 4 changed to on
bootsplash 3.1.3-2003/11/14: looking for picture.... found (1024x768, 20089
bytes, v3).
bootsplash: status on console 5 changed to on
Debug: sleeping function called from invalid context at mm/slab.c:1856
in_atomic():1, irqs_disabled():0
Call Trace:
[<c0122a2b>] __might_sleep+0xab/0xd0
[<c0149340>] kmem_cache_alloc+0x70/0x80
[<c0159661>] __get_vm_area+0x21/0x150
[<c01597c3>] get_vm_area+0x33/0x40
[<c011e6a3>] __ioremap+0xb3/0x100
[<c0145492>] buffered_rmqueue+0xe2/0x190
[<c011e719>] ioremap_nocache+0x29/0xb0
[<d1c9169a>] os_map_kernel_space+0x68/0x6c [nvidia]
[<c01595db>] map_vm_area+0x6b/0xd0
[<d1ca3ce7>] __nvsym00568+0x1f/0x2c [nvidia]
[<d1ca5e06>] __nvsym00775+0x6e/0xe0 [nvidia]
[<d1ca5e96>] __nvsym00781+0x1e/0x190 [nvidia]
[<d1ca791c>] rm_init_adapter+0xc/0x10 [nvidia]
[<d1c8de48>] nv_kern_open+0x122/0x26d [nvidia]
[<c016943c>] chrdev_open+0x12c/0x2c0
[<c01cb34e>] devfs_open+0x11e/0x140
[<c015e7ca>] dentry_open+0x15a/0x240
[<c015e666>] filp_open+0x66/0x70
[<c015ebb3>] sys_open+0x53/0x90
[<c010b69b>] syscall_call+0x7/0xb
Debug: sleeping function called from invalid context at mm/slab.c:1856
in_atomic():1, irqs_disabled():0
Call Trace:
[<c0122a2b>] __might_sleep+0xab/0xd0
[<c028baef>] generic_unplug_device+0x8f/0xa0
[<c0149340>] kmem_cache_alloc+0x70/0x80
[<c0159661>] __get_vm_area+0x21/0x150
[<c01597c3>] get_vm_area+0x33/0x40
[<c011e6a3>] __ioremap+0xb3/0x100
[<c0145492>] buffered_rmqueue+0xe2/0x190
[<c011e719>] ioremap_nocache+0x29/0xb0
[<d1c9169a>] os_map_kernel_space+0x68/0x6c [nvidia]
[<c01595db>] map_vm_area+0x6b/0xd0
[<d1ca3ce7>] __nvsym00568+0x1f/0x2c [nvidia]
[<d1ca5e06>] __nvsym00775+0x6e/0xe0 [nvidia]
[<d1ca5e96>] __nvsym00781+0x1e/0x190 [nvidia]
[<d1ca791c>] rm_init_adapter+0xc/0x10 [nvidia]
[<d1c8de48>] nv_kern_open+0x122/0x26d [nvidia]
[<c016943c>] chrdev_open+0x12c/0x2c0
[<c01cb34e>] devfs_open+0x11e/0x140
[<c015e7ca>] dentry_open+0x15a/0x240
[<c015e666>] filp_open+0x66/0x70
[<c015ebb3>] sys_open+0x53/0x90
[<c010b69b>] syscall_call+0x7/0xb
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
hdc: lost interrupt
hdc: cdrom_pc_intr: The drive appears confused (ireason = 0x01)
hdc: lost interrupt
hdc: cdrom_pc_intr: The drive appears confused (ireason = 0x01)
hdc: lost interrupt
hdc: cdrom_pc_intr: The drive appears confused (ireason = 0x01)
hdc: lost interrupt
hdc: cdrom_pc_intr: The drive appears confused (ireason = 0x01)
hdc: lost interrupt
hdc: cdrom_pc_intr: The drive appears confused (ireason = 0x01)
hdc: lost interrupt
----------------------
I hope that help...
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/