[Fwd: ACPI unbug report]

[RunNHide]

Thought I'd forward this on - this is NOT a bug report

RunNHide
> --- Begin Message ---
> I heard that ACPI currently isn't working in 2.6, and it seems to be working 
> fine for me, so I thought this report might be helpful.
>
> Things that work:
> *Soft off.
> *echo 1 >/proc/acpi/sleep (in runlevel multiuser console mode)
> *echo 1 >/proc/acpi/sleep (in X with gnome)
>
>
> dmesg:
> Linux version 2.6.0 (root@andry) (gcc version 3.3.2 20030908 (Debian 
> prerelease)) #2 Thu Dec 18 22:16:46 PST 2003
> BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 0000000007ff0000 (usable)
> BIOS-e820: 0000000007ff0000 - 0000000007ff3000 (ACPI NVS)
> BIOS-e820: 0000000007ff3000 - 0000000008000000 (ACPI data)
> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
> 127MB LOWMEM available.
> On node 0 totalpages: 32752
>  DMA zone: 4096 pages, LIFO batch:1
>  Normal zone: 28656 pages, LIFO batch:6
>  HighMem zone: 0 pages, LIFO batch:1
> DMI 2.2 present.
> ACPI: RSDP (v000 VIA694                                    ) @ 0x000f6ea0
> ACPI: RSDT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x07ff3000
> ACPI: FADT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x07ff3040
> ACPI: DSDT (v001 VIA694 AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
> Building zonelist for node : 0
> Kernel command line: BOOT_IMAGE=Linux2.6.0 ro root=1601
> Local APIC disabled by BIOS -- reenabling.
> Found and enabled local APIC!
> Initializing CPU#0
> PID hash table entries: 512 (order 9: 4096 bytes)
> Detected 900.225 MHz processor.
> Console: colour VGA+ 80x25
> Memory: 125476k/131008k available (2431k kernel code, 4996k reserved, 741k 
> data, 344k init, 0k highmem)
> Calibrating delay loop... 1769.47 BogoMIPS
> Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
> Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
> Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
> CPU:     After generic identify, caps: 0183fbff c1c7fbff 00000000 00000000
> CPU:     After vendor identify, caps: 0183fbff c1c7fbff 00000000 00000000
> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> CPU: L2 Cache: 256K (64 bytes/line)
> CPU:     After all inits, caps: 0183fbff c1c7fbff 00000000 00000020
> Intel machine check architecture supported.
> Intel machine check reporting enabled on CPU#0.
> CPU: AMD Athlon(tm) processor stepping 02
> Enabling fast FPU save and restore... done.
> Checking 'hlt' instruction... OK.
> POSIX conformance testing by UNIFIX
> enabled ExtINT on CPU#0
> ESR value before enabling vector: 00000000
> ESR value after enabling vector: 00000000
> Using local APIC timer interrupts.
> calibrating APIC timer ...
> ..... CPU clock speed is 899.0971 MHz.
> ..... host bus clock speed is 199.0993 MHz.
> NET: Registered protocol family 16
> PCI: PCI BIOS revision 2.10 entry at 0xfb3b0, last bus=1
> PCI: Using configuration type 1
> mtrr: v2.0 (20020519)
> ACPI: Subsystem revision 20031002
> spurious 8259A interrupt: IRQ7.
> ACPI: Interpreter enabled
> ACPI: Using PIC for interrupt routing
> ACPI: PCI Root Bridge [PCI0] (00:00)
> PCI: Probing PCI hardware (bus 00)
> Disabling VIA memory write queue (PCI ID 0305, rev 03): [55] 89 & 1f -> 09
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
> ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 11 12 14 15)
> ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
> ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
> Linux Plug and Play Support v0.97 (c) Adam Belay
> SCSI subsystem initialized
> drivers/usb/core/usb.c: registered new driver usbfs
> drivers/usb/core/usb.c: registered new driver hub
> ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
> ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
> ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9
> ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
> PCI: Using ACPI for IRQ routing
> PCI: if you experience problems, try using option 'pci=noacpi' or even 
> 'acpi=off'
> Machine check exception polling timer started.
> Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
> NTFS driver 2.1.5 [Flags: R/O].
> udf: registering filesystem
> Initializing Cryptographic API
> Applying VIA southbridge workaround.
> PCI: Disabling Via external APIC routing
> ACPI: Power Button (FF) [PWRF]
> ACPI: Sleep Button (CM) [SLPB]
> ACPI: Processor [CPU0] (supports C1 C2, 2 throttling states)
> pty: 256 Unix98 ptys configured
> request_module: failed /sbin/modprobe -- parport_lowlevel. error = -16
> lp: driver loaded but no devices found
> Linux agpgart interface v0.100 (c) Dave Jones
> agpgart: Detected VIA Twister-K/KT133x/KM133 chipset
> agpgart: Maximum main memory to use for agp memory: 94M
> agpgart: AGP aperture is 64M @ 0xd8000000
> Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
> ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
> parport0: PC-style at 0x378 [PCSPP,TRISTATE,EPP]
> parport0: cpp_daisy: aa5500ff(18)
> parport0: assign_addrs: aa5500ff(18)
> parport0: Printer, EPSON Stylus Photo 700
> lp0: using parport0 (polling).
> parport_pc: Via 686A parallel port: io=0x378
> Using anticipatory io scheduler
> Floppy drive(s): fd0 is 1.44M
> FDC 0 is a post-1991 82077
> 8139too Fast Ethernet driver 0.9.26
> eth0: RealTek RTL8139 at 0xc881c000, 00:40:c7:87:19:bd, IRQ 5
> eth0:  Identified 8139 chip type 'RTL-8139B'
> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> VP_IDE: IDE controller at PCI slot 0000:00:07.1
> VP_IDE: chipset revision 6
> VP_IDE: not 100% native mode: will probe irqs later
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:07.1
>    ide0: BM-DMA at 0x9000-0x9007, BIOS settings: hda:DMA, hdb:pio
>    ide1: BM-DMA at 0x9008-0x900f, BIOS settings: hdc:DMA, hdd:pio
> hda: ST340016A, ATA DISK drive
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> hdc: ST340016A, ATA DISK drive
> ide1 at 0x170-0x177,0x376 on irq 15
> PDC20269: IDE controller at PCI slot 0000:00:14.0
> PDC20269: chipset revision 2
> PDC20269: 100% native mode on irq 11
>    ide2: BM-DMA at 0xc000-0xc007, BIOS settings: hde:pio, hdf:pio
>    ide3: BM-DMA at 0xc008-0xc00f, BIOS settings: hdg:pio, hdh:pio
> hde: DVD-ROM DDU1621, ATAPI CD/DVD-ROM drive
> ide2 at 0xb000-0xb007,0xb402 on irq 11
> hdg: SONY CD-RW CRX145E, ATAPI CD/DVD-ROM drive
> ide3 at 0xb800-0xb807,0xbc02 on irq 11
> hda: max request size: 128KiB
> hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
> hda: hda1 hda2
> hdc: max request size: 128KiB
> hdc: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
> hdc: hdc1 hdc2 hdc3
> hde: ATAPI 40X DVD-ROM drive, 512kB Cache
> Uniform CD-ROM driver Revision: 3.12
> hdg: ATAPI 32X CD-ROM CD-R/RW drive, 4096kB Cache
> drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver 
> v2.1
> uhci_hcd 0000:00:07.2: UHCI Host Controller
> uhci_hcd 0000:00:07.2: irq 11, io base 00009400
> uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
> hub 1-0:1.0: USB hub found
> hub 1-0:1.0: 2 ports detected
> uhci_hcd 0000:00:07.3: UHCI Host Controller
> uhci_hcd 0000:00:07.3: irq 11, io base 00009800
> uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2
> hub 2-0:1.0: USB hub found
> hub 2-0:1.0: 2 ports detected
> Initializing USB Mass Storage driver...
> drivers/usb/core/usb.c: registered new driver usb-storage
> USB Mass Storage support registered.
> drivers/usb/core/usb.c: registered new driver hid
> drivers/usb/input/hid-core.c: v2.0:USB HID core driver
> mice: PS/2 mouse device common for all mice
> input: PS2++ Logitech Wheel Mouse on isa0060/serio1
> serio: i8042 AUX port at 0x60,0x64 irq 12
> input: AT Translated Set 2 keyboard on isa0060/serio0
> serio: i8042 KBD port at 0x60,0x64 irq 1
> md: raid0 personality registered as nr 2
> md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
> Advanced Linux Sound Architecture Driver Version 0.9.7 (Thu Sep 25 19:16:36 
> 2003 UTC).
> request_module: failed /sbin/modprobe -- snd-card-0. error = -16
> ALSA device list:
>  #0: Ensoniq AudioPCI ENS1371 at 0xac00, irq 9
> NET: Registered protocol family 2
> IP: routing cache hash table of 512 buckets, 4Kbytes
> TCP: Hash tables configured (established 8192 bind 16384)
> NET: Registered protocol family 1
> NET: Registered protocol family 17
> ACPI: (supports S0 S1 S4 S5)
> md: Autodetecting RAID arrays.
> md: autorun ...
> md: ... autorun DONE.
> kjournald starting.  Commit interval 5 seconds
> EXT3-fs: mounted filesystem with ordered data mode.
> VFS: Mounted root (ext3 filesystem) readonly.
> Freeing unused kernel memory: 344k freed
> hub 1-0:1.0: new USB device on port 1, assigned address 2
> Adding 289160k swap on /dev/hdc3.  Priority:-1 extents:1
> EXT3 FS on hdc1, internal journal
> md: bind<hda2>
> md: nonpersistent superblock ...
> md: bind<hdc2>
> md: nonpersistent superblock ...
> md0: setting max_sectors to 128, segment boundary to 32767
> raid0: looking at hdc2
> raid0:   comparing hdc2(36146240) with hdc2(36146240)
> raid0:   END
> raid0:   ==> UNIQUE
> raid0: 1 zones
> raid0: looking at hda2
> raid0:   comparing hda2(36146240) with hdc2(36146240)
> raid0:   EQUAL
> raid0: FINAL 1 zones
> raid0: done.
> raid0 : md_size is 72292480 blocks.
> raid0 : conf->hash_spacing is 72292480 blocks.
> raid0 : nb_zone is 1.
> raid0 : Allocating 4 bytes for hash.
> NTFS volume version 3.0.
> NTFS volume version 3.1.
> eth0: link up, 10Mbps, half-duplex, lpa 0x0000
> nvidia: module license 'NVIDIA' taints kernel.
> 0: nvidia: loading NVIDIA Linux x86 nvidia.o Kernel Module  1.0-4496  Wed 
> Jul 16 19:03:09 PDT 2003
> agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
> agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
> agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
> cdrom: This disc doesn't have any tracks I recognize!
> cdrom: This disc doesn't have any tracks I recognize!
>
>
> lspci -v:
> 00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] (rev 
> 03)
>        Flags: bus master, medium devsel, latency 0
>        Memory at d8000000 (32-bit, prefetchable) [size=64M]
>        Capabilities: [a0] AGP version 2.0
>        Capabilities: [c0] Power Management version 2
>
> 00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP] 
> (prog-if 00 [Normal decode])
>        Flags: bus master, 66Mhz, medium devsel, latency 0
>        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
>        Memory behind bridge: dc000000-ddffffff
>        Prefetchable memory behind bridge: d0000000-d7ffffff
>        Capabilities: [80] Power Management version 2
>
> 00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] 
> (rev 40)
>        Subsystem: VIA Technologies, Inc. VT82C686/A PCI to ISA Bridge
>        Flags: bus master, stepping, medium devsel, latency 0
>        Capabilities: [c0] Power Management version 2
>
> 00:07.1 IDE interface: VIA Technologies, Inc. VT82C586/B/686A/B PIPC Bus 
> Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
>        Subsystem: VIA Technologies, Inc. VT8235 Bus Master ATA133/100/66/33 
> IDE        Flags: bus master, medium devsel, latency 32
>        I/O ports at 9000 [size=16]
>        Capabilities: [c0] Power Management version 2
>
> 00:07.2 USB Controller: VIA Technologies, Inc. USB (rev 16) (prog-if 00 
> [UHCI])
>        Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
>        Flags: bus master, medium devsel, latency 32, IRQ 11
>        I/O ports at 9400 [size=32]
>        Capabilities: [80] Power Management version 2
>
> 00:07.3 USB Controller: VIA Technologies, Inc. USB (rev 16) (prog-if 00 
> [UHCI])
>        Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
>        Flags: bus master, medium devsel, latency 32, IRQ 11
>        I/O ports at 9800 [size=32]
>        Capabilities: [80] Power Management version 2
>
> 00:07.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40)
>        Subsystem: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
>        Flags: medium devsel, IRQ 11
>        Capabilities: [68] Power Management version 2
>
> 00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. 
> RTL-8139/8139C/8139C+ (rev 10)
>        Subsystem: Realtek Semiconductor Co., Ltd. RT8139
>        Flags: bus master, medium devsel, latency 32, IRQ 5
>        I/O ports at a800 [size=256]
>        Memory at df004000 (32-bit, non-prefetchable) [size=256]
>
> 00:12.0 Multimedia audio controller: Ensoniq 5880 AudioPCI (rev 02)
>        Subsystem: Ensoniq: Unknown device 8001
>        Flags: bus master, slow devsel, latency 32, IRQ 9
>        I/O ports at ac00 [size=64]
>        Capabilities: [dc] Power Management version 1
>
> 00:14.0 Unknown mass storage controller: Promise Technology, Inc. 20269 (rev 
> 02) (prog-if 85)
>        Subsystem: Promise Technology, Inc.: Unknown device 4d68
>        Flags: bus master, 66Mhz, slow devsel, latency 32, IRQ 11
>        I/O ports at b000 [size=8]
>        I/O ports at b400 [size=4]
>        I/O ports at b800 [size=8]
>        I/O ports at bc00 [size=4]
>        I/O ports at c000 [size=16]
>        Memory at df000000 (32-bit, non-prefetchable) [size=16K]
>        Expansion ROM at <unassigned> [disabled] [size=16K]
>        Capabilities: [60] Power Management version 1
>
> 01:00.0 VGA compatible controller: nVidia Corporation NV11 [GeForce2 MX/MX 
> 400] (rev a1) (prog-if 00 [VGA])
>        Subsystem: Guillemot Corporation: Unknown device 7100
>        Flags: bus master, 66Mhz, medium devsel, latency 248, IRQ 10
>        Memory at dc000000 (32-bit, non-prefetchable) [size=16M]
>        Memory at d0000000 (32-bit, prefetchable) [size=128M]
>        Expansion ROM at <unassigned> [disabled] [size=64K]
>        Capabilities: [60] Power Management version 2
>        Capabilities: [44] AGP version 2.0
>
>
> .config:
> #
> # Automatically generated make config: don't edit
> #
> CONFIG_X86=y
> CONFIG_MMU=y
> CONFIG_UID16=y
> CONFIG_GENERIC_ISA_DMA=y
>
> #
> # Code maturity level options
> #
> CONFIG_EXPERIMENTAL=y
> CONFIG_CLEAN_COMPILE=y
> CONFIG_STANDALONE=y
> CONFIG_BROKEN_ON_SMP=y
>
> #
> # General setup
> #
> CONFIG_SWAP=y
> CONFIG_SYSVIPC=y
> # CONFIG_BSD_PROCESS_ACCT is not set
> CONFIG_SYSCTL=y
> CONFIG_LOG_BUF_SHIFT=14
> # CONFIG_IKCONFIG is not set
> # CONFIG_EMBEDDED is not set
> CONFIG_KALLSYMS=y
> CONFIG_FUTEX=y
> CONFIG_EPOLL=y
> CONFIG_IOSCHED_NOOP=y
> CONFIG_IOSCHED_AS=y
> CONFIG_IOSCHED_DEADLINE=y
>
> #
> # Loadable module support
> #
> CONFIG_MODULES=y
> CONFIG_MODULE_UNLOAD=y
> CONFIG_MODULE_FORCE_UNLOAD=y
> CONFIG_OBSOLETE_MODPARM=y
> # CONFIG_MODVERSIONS is not set
> CONFIG_KMOD=y
>
> #
> # Processor type and features
> #
> CONFIG_X86_PC=y
> # CONFIG_X86_VOYAGER is not set
> # CONFIG_X86_NUMAQ is not set
> # CONFIG_X86_SUMMIT is not set
> # CONFIG_X86_BIGSMP is not set
> # CONFIG_X86_VISWS is not set
> # CONFIG_X86_GENERICARCH is not set
> # CONFIG_X86_ES7000 is not set
> # CONFIG_M386 is not set
> # CONFIG_M486 is not set
> # CONFIG_M586 is not set
> # CONFIG_M586TSC is not set
> # CONFIG_M586MMX is not set
> # CONFIG_M686 is not set
> # CONFIG_MPENTIUMII is not set
> # CONFIG_MPENTIUMIII is not set
> # CONFIG_MPENTIUM4 is not set
> # CONFIG_MK6 is not set
> CONFIG_MK7=y
> # CONFIG_MK8 is not set
> # CONFIG_MELAN is not set
> # CONFIG_MCRUSOE is not set
> # CONFIG_MWINCHIPC6 is not set
> # CONFIG_MWINCHIP2 is not set
> # CONFIG_MWINCHIP3D is not set
> # CONFIG_MCYRIXIII is not set
> # CONFIG_MVIAC3_2 is not set
> # CONFIG_X86_GENERIC is not set
> CONFIG_X86_CMPXCHG=y
> CONFIG_X86_XADD=y
> CONFIG_X86_L1_CACHE_SHIFT=6
> CONFIG_RWSEM_XCHGADD_ALGORITHM=y
> CONFIG_X86_WP_WORKS_OK=y
> CONFIG_X86_INVLPG=y
> CONFIG_X86_BSWAP=y
> CONFIG_X86_POPAD_OK=y
> CONFIG_X86_GOOD_APIC=y
> CONFIG_X86_INTEL_USERCOPY=y
> CONFIG_X86_USE_PPRO_CHECKSUM=y
> CONFIG_X86_USE_3DNOW=y
> # CONFIG_HPET_TIMER is not set
> # CONFIG_HPET_EMULATE_RTC is not set
> # CONFIG_SMP is not set
> CONFIG_PREEMPT=y
> CONFIG_X86_UP_APIC=y
> CONFIG_X86_UP_IOAPIC=y
> CONFIG_X86_LOCAL_APIC=y
> CONFIG_X86_IO_APIC=y
> CONFIG_X86_TSC=y
> CONFIG_X86_MCE=y
> CONFIG_X86_MCE_NONFATAL=y
> # CONFIG_X86_MCE_P4THERMAL is not set
> # CONFIG_TOSHIBA is not set
> # CONFIG_I8K is not set
> # CONFIG_MICROCODE is not set
> # CONFIG_X86_MSR is not set
> # CONFIG_X86_CPUID is not set
> # CONFIG_EDD is not set
> CONFIG_NOHIGHMEM=y
> # CONFIG_HIGHMEM4G is not set
> # CONFIG_HIGHMEM64G is not set
> # CONFIG_MATH_EMULATION is not set
> CONFIG_MTRR=y
> CONFIG_HAVE_DEC_LOCK=y
>
> #
> # Power management options (ACPI, APM)
> #
> CONFIG_PM=y
> # CONFIG_SOFTWARE_SUSPEND is not set
> # CONFIG_PM_DISK is not set
>
> #
> # ACPI (Advanced Configuration and Power Interface) Support
> #
> CONFIG_ACPI=y
> CONFIG_ACPI_BOOT=y
> CONFIG_ACPI_INTERPRETER=y
> CONFIG_ACPI_SLEEP=y
> CONFIG_ACPI_SLEEP_PROC_FS=y
> CONFIG_ACPI_AC=y
> CONFIG_ACPI_BATTERY=y
> CONFIG_ACPI_BUTTON=y
> CONFIG_ACPI_FAN=y
> CONFIG_ACPI_PROCESSOR=y
> CONFIG_ACPI_THERMAL=y
> # CONFIG_ACPI_ASUS is not set
> # CONFIG_ACPI_TOSHIBA is not set
> # CONFIG_ACPI_DEBUG is not set
> CONFIG_ACPI_BUS=y
> CONFIG_ACPI_EC=y
> CONFIG_ACPI_POWER=y
> CONFIG_ACPI_PCI=y
> CONFIG_ACPI_SYSTEM=y
> # CONFIG_ACPI_RELAXED_AML is not set
>
> #
> # APM (Advanced Power Management) BIOS Support
> #
> # CONFIG_APM is not set
>
> #
> # CPU Frequency scaling
> #
> # CONFIG_CPU_FREQ is not set
>
> #
> # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
> #
> CONFIG_PCI=y
> # CONFIG_PCI_GOBIOS is not set
> # CONFIG_PCI_GODIRECT is not set
> CONFIG_PCI_GOANY=y
> CONFIG_PCI_BIOS=y
> CONFIG_PCI_DIRECT=y
> CONFIG_PCI_LEGACY_PROC=y
> CONFIG_PCI_NAMES=y
> CONFIG_ISA=y
> # CONFIG_EISA is not set
> # CONFIG_MCA is not set
> # CONFIG_SCx200 is not set
> # CONFIG_HOTPLUG is not set
>
> #
> # Executable file formats
> #
> CONFIG_BINFMT_ELF=y
> CONFIG_BINFMT_AOUT=y
> CONFIG_BINFMT_MISC=y
>
> #
> # Device Drivers
> #
>
> #
> # Generic Driver Options
> #
>
> #
> # Memory Technology Devices (MTD)
> #
> # CONFIG_MTD is not set
>
> #
> # Parallel port support
> #
> CONFIG_PARPORT=y
> CONFIG_PARPORT_PC=y
> CONFIG_PARPORT_PC_CML1=y
> # CONFIG_PARPORT_SERIAL is not set
> # CONFIG_PARPORT_PC_FIFO is not set
> # CONFIG_PARPORT_PC_SUPERIO is not set
> # CONFIG_PARPORT_OTHER is not set
> CONFIG_PARPORT_1284=y
>
> #
> # Plug and Play support
> #
> CONFIG_PNP=y
> # CONFIG_PNP_DEBUG is not set
>
> #
> # Protocols
> #
> # CONFIG_ISAPNP is not set
> # CONFIG_PNPBIOS is not set
>
> #
> # Block devices
> #
> CONFIG_BLK_DEV_FD=y
> # CONFIG_BLK_DEV_XD is not set
> # CONFIG_PARIDE is not set
> # CONFIG_BLK_CPQ_DA is not set
> # CONFIG_BLK_CPQ_CISS_DA is not set
> # CONFIG_BLK_DEV_DAC960 is not set
> # CONFIG_BLK_DEV_UMEM is not set
> CONFIG_BLK_DEV_LOOP=m
> CONFIG_BLK_DEV_CRYPTOLOOP=m
> # CONFIG_BLK_DEV_NBD is not set
> # CONFIG_BLK_DEV_RAM is not set
> # CONFIG_BLK_DEV_INITRD is not set
> CONFIG_LBD=y
>
> #
> # ATA/ATAPI/MFM/RLL support
> #
> CONFIG_IDE=y
> CONFIG_BLK_DEV_IDE=y
>
> #
> # Please see Documentation/ide.txt for help/info on IDE drives
> #
> # CONFIG_BLK_DEV_HD_IDE is not set
> CONFIG_BLK_DEV_IDEDISK=y
> CONFIG_IDEDISK_MULTI_MODE=y
> # CONFIG_IDEDISK_STROKE is not set
> CONFIG_BLK_DEV_IDECD=y
> # CONFIG_BLK_DEV_IDETAPE is not set
> # CONFIG_BLK_DEV_IDEFLOPPY is not set
> # CONFIG_BLK_DEV_IDESCSI is not set
> # CONFIG_IDE_TASK_IOCTL is not set
> CONFIG_IDE_TASKFILE_IO=y
>
> #
> # IDE chipset support/bugfixes
> #
> # CONFIG_BLK_DEV_CMD640 is not set
> # CONFIG_BLK_DEV_IDEPNP is not set
> CONFIG_BLK_DEV_IDEPCI=y
> CONFIG_IDEPCI_SHARE_IRQ=y
> # CONFIG_BLK_DEV_OFFBOARD is not set
> CONFIG_BLK_DEV_GENERIC=y
> # CONFIG_BLK_DEV_OPTI621 is not set
> # CONFIG_BLK_DEV_RZ1000 is not set
> CONFIG_BLK_DEV_IDEDMA_PCI=y
> # CONFIG_BLK_DEV_IDEDMA_FORCED is not set
> CONFIG_IDEDMA_PCI_AUTO=y
> # CONFIG_IDEDMA_ONLYDISK is not set
> # CONFIG_IDEDMA_PCI_WIP is not set
> CONFIG_BLK_DEV_ADMA=y
> # CONFIG_BLK_DEV_AEC62XX is not set
> # CONFIG_BLK_DEV_ALI15X3 is not set
> # CONFIG_BLK_DEV_AMD74XX is not set
> # CONFIG_BLK_DEV_CMD64X is not set
> # CONFIG_BLK_DEV_TRIFLEX is not set
> # CONFIG_BLK_DEV_CY82C693 is not set
> # CONFIG_BLK_DEV_CS5520 is not set
> # CONFIG_BLK_DEV_CS5530 is not set
> # CONFIG_BLK_DEV_HPT34X is not set
> # CONFIG_BLK_DEV_HPT366 is not set
> # CONFIG_BLK_DEV_SC1200 is not set
> # CONFIG_BLK_DEV_PIIX is not set
> # CONFIG_BLK_DEV_NS87415 is not set
> # CONFIG_BLK_DEV_PDC202XX_OLD is not set
> CONFIG_BLK_DEV_PDC202XX_NEW=y
> # CONFIG_PDC202XX_FORCE is not set
> # CONFIG_BLK_DEV_SVWKS is not set
> # CONFIG_BLK_DEV_SIIMAGE is not set
> # CONFIG_BLK_DEV_SIS5513 is not set
> # CONFIG_BLK_DEV_SLC90E66 is not set
> # CONFIG_BLK_DEV_TRM290 is not set
> CONFIG_BLK_DEV_VIA82CXXX=y
> # CONFIG_IDE_CHIPSETS is not set
> CONFIG_BLK_DEV_IDEDMA=y
> # CONFIG_IDEDMA_IVB is not set
> CONFIG_IDEDMA_AUTO=y
> # CONFIG_DMA_NONPCI is not set
> # CONFIG_BLK_DEV_HD is not set
>
> #
> # SCSI device support
> #
> CONFIG_SCSI=y
> # CONFIG_SCSI_PROC_FS is not set
>
> #
> # SCSI support type (disk, tape, CD-ROM)
> #
> # CONFIG_BLK_DEV_SD is not set
> # CONFIG_CHR_DEV_ST is not set
> # CONFIG_CHR_DEV_OSST is not set
> # CONFIG_BLK_DEV_SR is not set
> # CONFIG_CHR_DEV_SG is not set
>
> #
> # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
> #
> # CONFIG_SCSI_MULTI_LUN is not set
> # CONFIG_SCSI_REPORT_LUNS is not set
> # CONFIG_SCSI_CONSTANTS is not set
> # CONFIG_SCSI_LOGGING is not set
>
> #
> # SCSI low-level drivers
> #
> # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
> # CONFIG_SCSI_7000FASST is not set
> # CONFIG_SCSI_ACARD is not set
> # CONFIG_SCSI_AHA152X is not set
> # CONFIG_SCSI_AHA1542 is not set
> # CONFIG_SCSI_AACRAID is not set
> # CONFIG_SCSI_AIC7XXX is not set
> # CONFIG_SCSI_AIC7XXX_OLD is not set
> # CONFIG_SCSI_AIC79XX is not set
> # CONFIG_SCSI_ADVANSYS is not set
> # CONFIG_SCSI_IN2000 is not set
> # CONFIG_SCSI_MEGARAID is not set
> # CONFIG_SCSI_SATA is not set
> # CONFIG_SCSI_BUSLOGIC is not set
> # CONFIG_SCSI_CPQFCTS is not set
> # CONFIG_SCSI_DMX3191D is not set
> # CONFIG_SCSI_DTC3280 is not set
> # CONFIG_SCSI_EATA is not set
> # CONFIG_SCSI_EATA_PIO is not set
> # CONFIG_SCSI_FUTURE_DOMAIN is not set
> # CONFIG_SCSI_GDTH is not set
> # CONFIG_SCSI_GENERIC_NCR5380 is not set
> # CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
> # CONFIG_SCSI_IPS is not set
> # CONFIG_SCSI_INIA100 is not set
> # CONFIG_SCSI_PPA is not set
> # CONFIG_SCSI_IMM is not set
> # CONFIG_SCSI_NCR53C406A is not set
> # CONFIG_SCSI_SYM53C8XX_2 is not set
> # CONFIG_SCSI_PAS16 is not set
> # CONFIG_SCSI_PSI240I is not set
> # CONFIG_SCSI_QLOGIC_FAS is not set
> # CONFIG_SCSI_QLOGIC_ISP is not set
> # CONFIG_SCSI_QLOGIC_FC is not set
> # CONFIG_SCSI_QLOGIC_1280 is not set
> # CONFIG_SCSI_SYM53C416 is not set
> # CONFIG_SCSI_DC395x is not set
> # CONFIG_SCSI_T128 is not set
> # CONFIG_SCSI_U14_34F is not set
> # CONFIG_SCSI_ULTRASTOR is not set
> # CONFIG_SCSI_NSP32 is not set
> # CONFIG_SCSI_DEBUG is not set
>
> #
> # Old CD-ROM drivers (not SCSI, not IDE)
> #
> # CONFIG_CD_NO_IDESCSI is not set
>
> #
> # Multi-device support (RAID and LVM)
> #
> CONFIG_MD=y
> CONFIG_BLK_DEV_MD=y
> CONFIG_MD_LINEAR=m
> CONFIG_MD_RAID0=y
> CONFIG_MD_RAID1=m
> CONFIG_MD_RAID5=m
> # CONFIG_MD_MULTIPATH is not set
> CONFIG_BLK_DEV_DM=m
> # CONFIG_DM_IOCTL_V4 is not set
>
> #
> # Fusion MPT device support
> #
>
> #
> # IEEE 1394 (FireWire) support (EXPERIMENTAL)
> #
> # CONFIG_IEEE1394 is not set
>
> #
> # I2O device support
> #
> # CONFIG_I2O is not set
>
> #
> # Networking support
> #
> CONFIG_NET=y
>
> #
> # Networking options
> #
> CONFIG_PACKET=y
> CONFIG_PACKET_MMAP=y
> # CONFIG_NETLINK_DEV is not set
> CONFIG_UNIX=y
> # CONFIG_NET_KEY is not set
> CONFIG_INET=y
> CONFIG_IP_MULTICAST=y
> # CONFIG_IP_ADVANCED_ROUTER is not set
> # CONFIG_IP_PNP is not set
> # CONFIG_NET_IPIP is not set
> # CONFIG_NET_IPGRE is not set
> # CONFIG_IP_MROUTE is not set
> # CONFIG_ARPD is not set
> # CONFIG_INET_ECN is not set
> # CONFIG_SYN_COOKIES is not set
> # CONFIG_INET_AH is not set
> # CONFIG_INET_ESP is not set
> # CONFIG_INET_IPCOMP is not set
>
> #
> # IP: Virtual Server Configuration
> #
> # CONFIG_IP_VS is not set
> # CONFIG_IPV6 is not set
> # CONFIG_DECNET is not set
> # CONFIG_BRIDGE is not set
> CONFIG_NETFILTER=y
> # CONFIG_NETFILTER_DEBUG is not set
>
> #
> # IP: Netfilter Configuration
> #
> CONFIG_IP_NF_CONNTRACK=m
> CONFIG_IP_NF_FTP=m
> CONFIG_IP_NF_IRC=m
> CONFIG_IP_NF_TFTP=m
> CONFIG_IP_NF_AMANDA=m
> CONFIG_IP_NF_QUEUE=m
> CONFIG_IP_NF_IPTABLES=m
> CONFIG_IP_NF_MATCH_LIMIT=m
> CONFIG_IP_NF_MATCH_IPRANGE=m
> CONFIG_IP_NF_MATCH_MAC=m
> CONFIG_IP_NF_MATCH_PKTTYPE=m
> CONFIG_IP_NF_MATCH_MARK=m
> CONFIG_IP_NF_MATCH_MULTIPORT=m
> CONFIG_IP_NF_MATCH_TOS=m
> CONFIG_IP_NF_MATCH_RECENT=m
> CONFIG_IP_NF_MATCH_ECN=m
> CONFIG_IP_NF_MATCH_DSCP=m
> CONFIG_IP_NF_MATCH_AH_ESP=m
> CONFIG_IP_NF_MATCH_LENGTH=m
> CONFIG_IP_NF_MATCH_TTL=m
> CONFIG_IP_NF_MATCH_TCPMSS=m
> CONFIG_IP_NF_MATCH_HELPER=m
> CONFIG_IP_NF_MATCH_STATE=m
> CONFIG_IP_NF_MATCH_CONNTRACK=m
> CONFIG_IP_NF_MATCH_OWNER=m
> CONFIG_IP_NF_FILTER=m
> CONFIG_IP_NF_TARGET_REJECT=m
> CONFIG_IP_NF_NAT=m
> CONFIG_IP_NF_NAT_NEEDED=y
> CONFIG_IP_NF_TARGET_MASQUERADE=m
> CONFIG_IP_NF_TARGET_REDIRECT=m
> CONFIG_IP_NF_TARGET_NETMAP=m
> CONFIG_IP_NF_TARGET_SAME=m
> # CONFIG_IP_NF_NAT_LOCAL is not set
> # CONFIG_IP_NF_NAT_SNMP_BASIC is not set
> CONFIG_IP_NF_NAT_IRC=m
> CONFIG_IP_NF_NAT_FTP=m
> CONFIG_IP_NF_NAT_TFTP=m
> CONFIG_IP_NF_NAT_AMANDA=m
> CONFIG_IP_NF_MANGLE=m
> CONFIG_IP_NF_TARGET_TOS=m
> CONFIG_IP_NF_TARGET_ECN=m
> CONFIG_IP_NF_TARGET_DSCP=m
> CONFIG_IP_NF_TARGET_MARK=m
> CONFIG_IP_NF_TARGET_CLASSIFY=m
> CONFIG_IP_NF_TARGET_LOG=m
> CONFIG_IP_NF_TARGET_ULOG=m
> CONFIG_IP_NF_TARGET_TCPMSS=m
> CONFIG_IP_NF_ARPTABLES=m
> CONFIG_IP_NF_ARPFILTER=m
> CONFIG_IP_NF_ARP_MANGLE=m
> # CONFIG_IP_NF_COMPAT_IPCHAINS is not set
> # CONFIG_IP_NF_COMPAT_IPFWADM is not set
>
> #
> # SCTP Configuration (EXPERIMENTAL)
> #
> CONFIG_IPV6_SCTP__=y
> # CONFIG_IP_SCTP is not set
> # CONFIG_ATM is not set
> # CONFIG_VLAN_8021Q is not set
> CONFIG_LLC=m
> # CONFIG_LLC2 is not set
> CONFIG_IPX=m
> # CONFIG_IPX_INTERN is not set
> CONFIG_ATALK=m
> # CONFIG_DEV_APPLETALK is not set
> # CONFIG_X25 is not set
> # CONFIG_LAPB is not set
> # CONFIG_NET_DIVERT is not set
> # CONFIG_ECONET is not set
> # CONFIG_WAN_ROUTER is not set
> # CONFIG_NET_FASTROUTE is not set
> # CONFIG_NET_HW_FLOWCONTROL is not set
>
> #
> # QoS and/or fair queueing
> #
> CONFIG_NET_SCHED=y
> CONFIG_NET_SCH_CBQ=m
> CONFIG_NET_SCH_HTB=m
> CONFIG_NET_SCH_CSZ=m
> CONFIG_NET_SCH_PRIO=m
> CONFIG_NET_SCH_RED=m
> CONFIG_NET_SCH_SFQ=m
> CONFIG_NET_SCH_TEQL=m
> CONFIG_NET_SCH_TBF=m
> CONFIG_NET_SCH_GRED=m
> CONFIG_NET_SCH_DSMARK=m
> CONFIG_NET_SCH_INGRESS=m
> CONFIG_NET_QOS=y
> CONFIG_NET_ESTIMATOR=y
> CONFIG_NET_CLS=y
> CONFIG_NET_CLS_TCINDEX=m
> CONFIG_NET_CLS_ROUTE4=m
> CONFIG_NET_CLS_ROUTE=y
> CONFIG_NET_CLS_FW=m
> CONFIG_NET_CLS_U32=m
> CONFIG_NET_CLS_RSVP=m
> CONFIG_NET_CLS_RSVP6=m
> CONFIG_NET_CLS_POLICE=y
>
> #
> # Network testing
> #
> # CONFIG_NET_PKTGEN is not set
> CONFIG_NETDEVICES=y
>
> #
> # ARCnet devices
> #
> # CONFIG_ARCNET is not set
> CONFIG_DUMMY=m
> # CONFIG_BONDING is not set
> # CONFIG_EQUALIZER is not set
> # CONFIG_TUN is not set
> # CONFIG_NET_SB1000 is not set
>
> #
> # Ethernet (10 or 100Mbit)
> #
> CONFIG_NET_ETHERNET=y
> CONFIG_MII=y
> # CONFIG_HAPPYMEAL is not set
> # CONFIG_SUNGEM is not set
> # CONFIG_NET_VENDOR_3COM is not set
> # CONFIG_LANCE is not set
> # CONFIG_NET_VENDOR_SMC is not set
> # CONFIG_NET_VENDOR_RACAL is not set
>
> #
> # Tulip family network device support
> #
> # CONFIG_NET_TULIP is not set
> # CONFIG_AT1700 is not set
> # CONFIG_DEPCA is not set
> # CONFIG_HP100 is not set
> # CONFIG_NET_ISA is not set
> CONFIG_NET_PCI=y
> # CONFIG_PCNET32 is not set
> # CONFIG_AMD8111_ETH is not set
> # CONFIG_ADAPTEC_STARFIRE is not set
> # CONFIG_AC3200 is not set
> # CONFIG_APRICOT is not set
> # CONFIG_B44 is not set
> # CONFIG_CS89x0 is not set
> # CONFIG_DGRS is not set
> # CONFIG_EEPRO100 is not set
> # CONFIG_E100 is not set
> # CONFIG_FEALNX is not set
> # CONFIG_NATSEMI is not set
> # CONFIG_NE2K_PCI is not set
> # CONFIG_8139CP is not set
> CONFIG_8139TOO=y
> # CONFIG_8139TOO_PIO is not set
> # CONFIG_8139TOO_TUNE_TWISTER is not set
> # CONFIG_8139TOO_8129 is not set
> # CONFIG_8139_OLD_RX_RESET is not set
> # CONFIG_SIS900 is not set
> # CONFIG_EPIC100 is not set
> # CONFIG_SUNDANCE is not set
> # CONFIG_TLAN is not set
> # CONFIG_VIA_RHINE is not set
> # CONFIG_NET_POCKET is not set
>
> #
> # Ethernet (1000 Mbit)
> #
> # CONFIG_ACENIC is not set
> # CONFIG_DL2K is not set
> # CONFIG_E1000 is not set
> # CONFIG_NS83820 is not set
> # CONFIG_HAMACHI is not set
> # CONFIG_YELLOWFIN is not set
> # CONFIG_R8169 is not set
> # CONFIG_SIS190 is not set
> # CONFIG_SK98LIN is not set
> # CONFIG_TIGON3 is not set
>
> #
> # Ethernet (10000 Mbit)
> #
> # CONFIG_IXGB is not set
> # CONFIG_FDDI is not set
> # CONFIG_HIPPI is not set
> # CONFIG_PLIP is not set
> # CONFIG_PPP is not set
> # CONFIG_SLIP is not set
>
> #
> # Wireless LAN (non-hamradio)
> #
> # CONFIG_NET_RADIO is not set
>
> #
> # Token Ring devices
> #
> # CONFIG_TR is not set
> # CONFIG_NET_FC is not set
> # CONFIG_RCPCI is not set
> # CONFIG_SHAPER is not set
>
> #
> # Wan interfaces
> #
> # CONFIG_WAN is not set
>
> #
> # Amateur Radio support
> #
> # CONFIG_HAMRADIO is not set
>
> #
> # IrDA (infrared) support
> #
> # CONFIG_IRDA is not set
>
> #
> # Bluetooth support
> #
> # CONFIG_BT is not set
>
> #
> # ISDN subsystem
> #
> # CONFIG_ISDN_BOOL is not set
>
> #
> # Telephony Support
> #
> # CONFIG_PHONE is not set
>
> #
> # Input device support
> #
> CONFIG_INPUT=y
>
> #
> # Userland interfaces
> #
> CONFIG_INPUT_MOUSEDEV=y
> CONFIG_INPUT_MOUSEDEV_PSAUX=y
> CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
> CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
> # CONFIG_INPUT_JOYDEV is not set
> # CONFIG_INPUT_TSDEV is not set
> # CONFIG_INPUT_EVDEV is not set
> # CONFIG_INPUT_EVBUG is not set
>
> #
> # Input I/O drivers
> #
> # CONFIG_GAMEPORT is not set
> CONFIG_SOUND_GAMEPORT=y
> CONFIG_SERIO=y
> CONFIG_SERIO_I8042=y
> # CONFIG_SERIO_SERPORT is not set
> # CONFIG_SERIO_CT82C710 is not set
> # CONFIG_SERIO_PARKBD is not set
> # CONFIG_SERIO_PCIPS2 is not set
>
> #
> # Input Device Drivers
> #
> CONFIG_INPUT_KEYBOARD=y
> CONFIG_KEYBOARD_ATKBD=y
> # CONFIG_KEYBOARD_SUNKBD is not set
> # CONFIG_KEYBOARD_XTKBD is not set
> # CONFIG_KEYBOARD_NEWTON is not set
> CONFIG_INPUT_MOUSE=y
> CONFIG_MOUSE_PS2=y
> # CONFIG_MOUSE_PS2_SYNAPTICS is not set
> # CONFIG_MOUSE_SERIAL is not set
> # CONFIG_MOUSE_INPORT is not set
> # CONFIG_MOUSE_LOGIBM is not set
> # CONFIG_MOUSE_PC110PAD is not set
> # CONFIG_INPUT_JOYSTICK is not set
> # CONFIG_INPUT_TOUCHSCREEN is not set
> # CONFIG_INPUT_MISC is not set
>
> #
> # Character devices
> #
> CONFIG_VT=y
> CONFIG_VT_CONSOLE=y
> CONFIG_HW_CONSOLE=y
> # CONFIG_SERIAL_NONSTANDARD is not set
>
> #
> # Serial drivers
> #
> CONFIG_SERIAL_8250=y
> # CONFIG_SERIAL_8250_CONSOLE is not set
> # CONFIG_SERIAL_8250_ACPI is not set
> CONFIG_SERIAL_8250_NR_UARTS=4
> # CONFIG_SERIAL_8250_EXTENDED is not set
>
> #
> # Non-8250 serial port support
> #
> CONFIG_SERIAL_CORE=y
> CONFIG_UNIX98_PTYS=y
> CONFIG_UNIX98_PTY_COUNT=256
> CONFIG_PRINTER=y
> # CONFIG_LP_CONSOLE is not set
> # CONFIG_PPDEV is not set
> # CONFIG_TIPAR is not set
>
> #
> # I2C support
> #
> CONFIG_I2C=m
> CONFIG_I2C_CHARDEV=m
>
> #
> # I2C Algorithms
> #
> # CONFIG_I2C_ALGOBIT is not set
> # CONFIG_I2C_ALGOPCF is not set
>
> #
> # I2C Hardware Bus support
> #
> # CONFIG_I2C_ALI1535 is not set
> # CONFIG_I2C_ALI15X3 is not set
> # CONFIG_I2C_AMD756 is not set
> # CONFIG_I2C_AMD8111 is not set
> # CONFIG_I2C_I801 is not set
> # CONFIG_I2C_ISA is not set
> # CONFIG_I2C_NFORCE2 is not set
> # CONFIG_I2C_PIIX4 is not set
> # CONFIG_I2C_SIS5595 is not set
> # CONFIG_I2C_SIS630 is not set
> # CONFIG_I2C_SIS96X is not set
> CONFIG_I2C_VIAPRO=m
>
> #
> # I2C Hardware Sensors Chip support
> #
> CONFIG_I2C_SENSOR=m
> # CONFIG_SENSORS_ADM1021 is not set
> # CONFIG_SENSORS_EEPROM is not set
> # CONFIG_SENSORS_IT87 is not set
> # CONFIG_SENSORS_LM75 is not set
> # CONFIG_SENSORS_LM78 is not set
> # CONFIG_SENSORS_LM85 is not set
> CONFIG_SENSORS_VIA686A=m
> # CONFIG_SENSORS_W83781D is not set
>
> #
> # Mice
> #
> # CONFIG_BUSMOUSE is not set
> # CONFIG_QIC02_TAPE is not set
>
> #
> # IPMI
> #
> # CONFIG_IPMI_HANDLER is not set
>
> #
> # Watchdog Cards
> #
> # CONFIG_WATCHDOG is not set
> # CONFIG_HW_RANDOM is not set
> # CONFIG_NVRAM is not set
> # CONFIG_RTC is not set
> # CONFIG_GEN_RTC is not set
> # CONFIG_DTLK is not set
> # CONFIG_R3964 is not set
> # CONFIG_APPLICOM is not set
> # CONFIG_SONYPI is not set
>
> #
> # Ftape, the floppy tape device driver
> #
> # CONFIG_FTAPE is not set
> CONFIG_AGP=y
> # CONFIG_AGP_ALI is not set
> # CONFIG_AGP_ATI is not set
> # CONFIG_AGP_AMD is not set
> # CONFIG_AGP_AMD64 is not set
> # CONFIG_AGP_INTEL is not set
> # CONFIG_AGP_NVIDIA is not set
> # CONFIG_AGP_SIS is not set
> # CONFIG_AGP_SWORKS is not set
> CONFIG_AGP_VIA=y
> # CONFIG_DRM is not set
> # CONFIG_MWAVE is not set
> # CONFIG_RAW_DRIVER is not set
> # CONFIG_HANGCHECK_TIMER is not set
>
> #
> # Multimedia devices
> #
> # CONFIG_VIDEO_DEV is not set
>
> #
> # Digital Video Broadcasting Devices
> #
> # CONFIG_DVB is not set
>
> #
> # Graphics support
> #
> # CONFIG_FB is not set
> # CONFIG_VIDEO_SELECT is not set
>
> #
> # Console display driver support
> #
> CONFIG_VGA_CONSOLE=y
> # CONFIG_MDA_CONSOLE is not set
> CONFIG_DUMMY_CONSOLE=y
>
> #
> # Sound
> #
> CONFIG_SOUND=y
>
> #
> # Advanced Linux Sound Architecture
> #
> CONFIG_SND=y
> CONFIG_SND_SEQUENCER=y
> # CONFIG_SND_SEQ_DUMMY is not set
> CONFIG_SND_OSSEMUL=y
> CONFIG_SND_MIXER_OSS=y
> CONFIG_SND_PCM_OSS=y
> CONFIG_SND_SEQUENCER_OSS=y
> # CONFIG_SND_VERBOSE_PRINTK is not set
> # CONFIG_SND_DEBUG is not set
>
> #
> # Generic devices
> #
> # CONFIG_SND_DUMMY is not set
> # CONFIG_SND_VIRMIDI is not set
> # CONFIG_SND_MTPAV is not set
> # CONFIG_SND_SERIAL_U16550 is not set
> # CONFIG_SND_MPU401 is not set
>
> #
> # ISA devices
> #
> # CONFIG_SND_AD1848 is not set
> # CONFIG_SND_CS4231 is not set
> # CONFIG_SND_CS4232 is not set
> # CONFIG_SND_CS4236 is not set
> # CONFIG_SND_ES1688 is not set
> # CONFIG_SND_ES18XX is not set
> # CONFIG_SND_GUSCLASSIC is not set
> # CONFIG_SND_GUSEXTREME is not set
> # CONFIG_SND_GUSMAX is not set
> # CONFIG_SND_INTERWAVE is not set
> # CONFIG_SND_INTERWAVE_STB is not set
> # CONFIG_SND_OPTI92X_AD1848 is not set
> # CONFIG_SND_OPTI92X_CS4231 is not set
> # CONFIG_SND_OPTI93X is not set
> # CONFIG_SND_SB8 is not set
> # CONFIG_SND_SB16 is not set
> # CONFIG_SND_SBAWE is not set
> # CONFIG_SND_WAVEFRONT is not set
> # CONFIG_SND_CMI8330 is not set
> # CONFIG_SND_OPL3SA2 is not set
> # CONFIG_SND_SGALAXY is not set
> # CONFIG_SND_SSCAPE is not set
>
> #
> # PCI devices
> #
> # CONFIG_SND_ALI5451 is not set
> # CONFIG_SND_AZT3328 is not set
> # CONFIG_SND_CS46XX is not set
> # CONFIG_SND_CS4281 is not set
> # CONFIG_SND_EMU10K1 is not set
> # CONFIG_SND_KORG1212 is not set
> # CONFIG_SND_NM256 is not set
> # CONFIG_SND_RME32 is not set
> # CONFIG_SND_RME96 is not set
> # CONFIG_SND_RME9652 is not set
> # CONFIG_SND_HDSP is not set
> # CONFIG_SND_TRIDENT is not set
> # CONFIG_SND_YMFPCI is not set
> # CONFIG_SND_ALS4000 is not set
> # CONFIG_SND_CMIPCI is not set
> # CONFIG_SND_ENS1370 is not set
> CONFIG_SND_ENS1371=y
> # CONFIG_SND_ES1938 is not set
> # CONFIG_SND_ES1968 is not set
> # CONFIG_SND_MAESTRO3 is not set
> # CONFIG_SND_FM801 is not set
> # CONFIG_SND_ICE1712 is not set
> # CONFIG_SND_ICE1724 is not set
> # CONFIG_SND_INTEL8X0 is not set
> # CONFIG_SND_SONICVIBES is not set
> # CONFIG_SND_VIA82XX is not set
> # CONFIG_SND_VX222 is not set
>
> #
> # ALSA USB devices
> #
> # CONFIG_SND_USB_AUDIO is not set
>
> #
> # Open Sound System
> #
> # CONFIG_SOUND_PRIME is not set
>
> #
> # USB support
> #
> CONFIG_USB=y
> # CONFIG_USB_DEBUG is not set
>
> #
> # Miscellaneous USB options
> #
> CONFIG_USB_DEVICEFS=y
> # CONFIG_USB_BANDWIDTH is not set
> # CONFIG_USB_DYNAMIC_MINORS is not set
>
> #
> # USB Host Controller Drivers
> #
> # CONFIG_USB_EHCI_HCD is not set
> # CONFIG_USB_OHCI_HCD is not set
> CONFIG_USB_UHCI_HCD=y
>
> #
> # USB Device Class drivers
> #
> # CONFIG_USB_AUDIO is not set
> # CONFIG_USB_BLUETOOTH_TTY is not set
> # CONFIG_USB_MIDI is not set
> # CONFIG_USB_ACM is not set
> # CONFIG_USB_PRINTER is not set
> CONFIG_USB_STORAGE=y
> # CONFIG_USB_STORAGE_DEBUG is not set
> CONFIG_USB_STORAGE_DATAFAB=y
> CONFIG_USB_STORAGE_FREECOM=y
> CONFIG_USB_STORAGE_ISD200=y
> CONFIG_USB_STORAGE_DPCM=y
> CONFIG_USB_STORAGE_HP8200e=y
> CONFIG_USB_STORAGE_SDDR09=y
> CONFIG_USB_STORAGE_SDDR55=y
> CONFIG_USB_STORAGE_JUMPSHOT=y
>
> #
> # USB Human Interface Devices (HID)
> #
> CONFIG_USB_HID=y
> CONFIG_USB_HIDINPUT=y
> # CONFIG_HID_FF is not set
> # CONFIG_USB_HIDDEV is not set
> # CONFIG_USB_AIPTEK is not set
> # CONFIG_USB_WACOM is not set
> # CONFIG_USB_KBTAB is not set
> # CONFIG_USB_POWERMATE is not set
> # CONFIG_USB_XPAD is not set
>
> #
> # USB Imaging devices
> #
> # CONFIG_USB_MDC800 is not set
> # CONFIG_USB_SCANNER is not set
> # CONFIG_USB_MICROTEK is not set
> # CONFIG_USB_HPUSBSCSI is not set
>
> #
> # USB Multimedia devices
> #
> # CONFIG_USB_DABUSB is not set
>
> #
> # Video4Linux support is needed for USB Multimedia device support
> #
>
> #
> # USB Network adaptors
> #
> # CONFIG_USB_CATC is not set
> # CONFIG_USB_KAWETH is not set
> # CONFIG_USB_PEGASUS is not set
> # CONFIG_USB_RTL8150 is not set
> # CONFIG_USB_USBNET is not set
>
> #
> # USB port drivers
> #
> # CONFIG_USB_USS720 is not set
>
> #
> # USB Serial Converter support
> #
> # CONFIG_USB_SERIAL is not set
>
> #
> # USB Miscellaneous drivers
> #
> # CONFIG_USB_TIGL is not set
> # CONFIG_USB_AUERSWALD is not set
> # CONFIG_USB_RIO500 is not set
> # CONFIG_USB_BRLVGER is not set
> # CONFIG_USB_LCD is not set
> # CONFIG_USB_TEST is not set
> # CONFIG_USB_GADGET is not set
>
> #
> # File systems
> #
> CONFIG_EXT2_FS=y
> # CONFIG_EXT2_FS_XATTR is not set
> CONFIG_EXT3_FS=y
> CONFIG_EXT3_FS_XATTR=y
> # CONFIG_EXT3_FS_POSIX_ACL is not set
> # CONFIG_EXT3_FS_SECURITY is not set
> CONFIG_JBD=y
> # CONFIG_JBD_DEBUG is not set
> CONFIG_FS_MBCACHE=y
> CONFIG_REISERFS_FS=m
> # CONFIG_REISERFS_CHECK is not set
> # CONFIG_REISERFS_PROC_INFO is not set
> CONFIG_JFS_FS=m
> # CONFIG_JFS_POSIX_ACL is not set
> # CONFIG_JFS_DEBUG is not set
> # CONFIG_JFS_STATISTICS is not set
> CONFIG_XFS_FS=m
> # CONFIG_XFS_RT is not set
> # CONFIG_XFS_QUOTA is not set
> # CONFIG_XFS_POSIX_ACL is not set
> CONFIG_MINIX_FS=m
> # CONFIG_ROMFS_FS is not set
> # CONFIG_QUOTA is not set
> # CONFIG_AUTOFS_FS is not set
> CONFIG_AUTOFS4_FS=y
>
> #
> # CD-ROM/DVD Filesystems
> #
> CONFIG_ISO9660_FS=y
> CONFIG_JOLIET=y
> # CONFIG_ZISOFS is not set
> CONFIG_UDF_FS=y
>
> #
> # DOS/FAT/NT Filesystems
> #
> CONFIG_FAT_FS=y
> CONFIG_MSDOS_FS=y
> CONFIG_VFAT_FS=y
> CONFIG_NTFS_FS=y
> # CONFIG_NTFS_DEBUG is not set
> # CONFIG_NTFS_RW is not set
>
> #
> # Pseudo filesystems
> #
> CONFIG_PROC_FS=y
> CONFIG_PROC_KCORE=y
> # CONFIG_DEVFS_FS is not set
> CONFIG_DEVPTS_FS=y
> # CONFIG_DEVPTS_FS_XATTR is not set
> CONFIG_TMPFS=y
> # CONFIG_HUGETLBFS is not set
> # CONFIG_HUGETLB_PAGE is not set
> CONFIG_RAMFS=y
>
> #
> # Miscellaneous filesystems
> #
> # CONFIG_ADFS_FS is not set
> # CONFIG_AFFS_FS is not set
> # CONFIG_HFS_FS is not set
> # CONFIG_BEFS_FS is not set
> # CONFIG_BFS_FS is not set
> # CONFIG_EFS_FS is not set
> # CONFIG_CRAMFS is not set
> # CONFIG_VXFS_FS is not set
> # CONFIG_HPFS_FS is not set
> # CONFIG_QNX4FS_FS is not set
> # CONFIG_SYSV_FS is not set
> # CONFIG_UFS_FS is not set
>
> #
> # Network File Systems
> #
> CONFIG_NFS_FS=y
> # CONFIG_NFS_V3 is not set
> # CONFIG_NFS_V4 is not set
> # CONFIG_NFS_DIRECTIO is not set
> CONFIG_NFSD=y
> # CONFIG_NFSD_V3 is not set
> # CONFIG_NFSD_TCP is not set
> CONFIG_LOCKD=y
> CONFIG_EXPORTFS=y
> CONFIG_SUNRPC=y
> # CONFIG_SUNRPC_GSS is not set
> # CONFIG_SMB_FS is not set
> # CONFIG_CIFS is not set
> # CONFIG_NCP_FS is not set
> # CONFIG_CODA_FS is not set
> # CONFIG_INTERMEZZO_FS is not set
> # CONFIG_AFS_FS is not set
>
> #
> # Partition Types
> #
> # CONFIG_PARTITION_ADVANCED is not set
> CONFIG_MSDOS_PARTITION=y
> CONFIG_NLS=y
>
> #
> # Native Language Support
> #
> CONFIG_NLS_DEFAULT="iso8859-1"
> CONFIG_NLS_CODEPAGE_437=y
> # CONFIG_NLS_CODEPAGE_737 is not set
> # CONFIG_NLS_CODEPAGE_775 is not set
> # CONFIG_NLS_CODEPAGE_850 is not set
> # CONFIG_NLS_CODEPAGE_852 is not set
> # CONFIG_NLS_CODEPAGE_855 is not set
> # CONFIG_NLS_CODEPAGE_857 is not set
> # CONFIG_NLS_CODEPAGE_860 is not set
> # CONFIG_NLS_CODEPAGE_861 is not set
> # CONFIG_NLS_CODEPAGE_862 is not set
> # CONFIG_NLS_CODEPAGE_863 is not set
> # CONFIG_NLS_CODEPAGE_864 is not set
> # CONFIG_NLS_CODEPAGE_865 is not set
> # CONFIG_NLS_CODEPAGE_866 is not set
> # CONFIG_NLS_CODEPAGE_869 is not set
> # CONFIG_NLS_CODEPAGE_936 is not set
> # CONFIG_NLS_CODEPAGE_950 is not set
> # CONFIG_NLS_CODEPAGE_932 is not set
> # CONFIG_NLS_CODEPAGE_949 is not set
> # CONFIG_NLS_CODEPAGE_874 is not set
> # CONFIG_NLS_ISO8859_8 is not set
> # CONFIG_NLS_CODEPAGE_1250 is not set
> # CONFIG_NLS_CODEPAGE_1251 is not set
> CONFIG_NLS_ISO8859_1=y
> # CONFIG_NLS_ISO8859_2 is not set
> # CONFIG_NLS_ISO8859_3 is not set
> # CONFIG_NLS_ISO8859_4 is not set
> # CONFIG_NLS_ISO8859_5 is not set
> # CONFIG_NLS_ISO8859_6 is not set
> # CONFIG_NLS_ISO8859_7 is not set
> # CONFIG_NLS_ISO8859_9 is not set
> # CONFIG_NLS_ISO8859_13 is not set
> # CONFIG_NLS_ISO8859_14 is not set
> # CONFIG_NLS_ISO8859_15 is not set
> # CONFIG_NLS_KOI8_R is not set
> # CONFIG_NLS_KOI8_U is not set
> CONFIG_NLS_UTF8=m
>
> #
> # Profiling support
> #
> # CONFIG_PROFILING is not set
>
> #
> # Kernel hacking
> #
> # CONFIG_DEBUG_KERNEL is not set
> # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
> # CONFIG_FRAME_POINTER is not set
> CONFIG_X86_EXTRA_IRQS=y
> CONFIG_X86_FIND_SMP_CONFIG=y
> CONFIG_X86_MPPARSE=y
>
> #
> # Security options
> #
> # CONFIG_SECURITY is not set
>
> #
> # Cryptographic options
> #
> CONFIG_CRYPTO=y
> CONFIG_CRYPTO_HMAC=y
> CONFIG_CRYPTO_NULL=m
> CONFIG_CRYPTO_MD4=m
> CONFIG_CRYPTO_MD5=m
> CONFIG_CRYPTO_SHA1=m
> CONFIG_CRYPTO_SHA256=m
> CONFIG_CRYPTO_SHA512=m
> CONFIG_CRYPTO_DES=m
> CONFIG_CRYPTO_BLOWFISH=m
> CONFIG_CRYPTO_TWOFISH=m
> CONFIG_CRYPTO_SERPENT=m
> CONFIG_CRYPTO_AES=m
> CONFIG_CRYPTO_CAST5=m
> CONFIG_CRYPTO_CAST6=m
> CONFIG_CRYPTO_DEFLATE=m
> # CONFIG_CRYPTO_TEST is not set
>
> #
> # Library routines
> #
> CONFIG_CRC32=y
> CONFIG_ZLIB_INFLATE=m
> CONFIG_ZLIB_DEFLATE=m
> CONFIG_X86_BIOS_REBOOT=y
> CONFIG_PC=y
>
> _________________________________________________________________
> STOP MORE SPAM with the new MSN 8 and get 2 months FREE* 
> http://join.msn.com/?page=features/junkmail
>
>
>
> --- End Message ---