Re: 2.6.1 and irq balancing

[Martin Schlemmer]

On Sun, 2004-01-11 at 01:14, Ethan Weinstein wrote:
> Greetings all,
> 
> I upgraded my server to 2.6.1, and I'm finding I'm saddled with only 
> interrupting on CPU0 again. 2.6.0 does this as well. This is the 
> Supermicro X5DPL-iGM-O (E7501 chipset), 2 Xeons@xxxxxx HT enabled. 
> /proc/cpuinfo is normal as per HT, displaying 4 cpus.
> 2.4.2(3|4) exhibited this behaviour as well, until I applied patches 
> from here: 
> http://www.hardrock.org/kernel/2.4.23/irqbalance-2.4.23-jb.patch, et al.
> 
> 
>             CPU0       CPU1       CPU2       CPU3
>    0:    1572323          0          0          0    IO-APIC-edge  timer
>    2:          0          0          0          0          XT-PIC  cascade
>    3:      23520          0          0          0    IO-APIC-edge  serial
>    8:          2          0          0          0    IO-APIC-edge  rtc
>    9:          0          0          0          0   IO-APIC-level  acpi
>   14:         10          0          0          0    IO-APIC-edge  ide0
>   16:         30          0          0          0   IO-APIC-level  sym53c8xx
>   22:       4162          0          0          0   IO-APIC-level  eth0
>   48:       7798          0          0          0   IO-APIC-level  aic79xx
>   49:       3385          0          0          0   IO-APIC-level  aic79xx
>   54:      17062          0          0          0   IO-APIC-level  eth1
> NMI:          0          0          0          0
> LOC:    1572002    1572251    1572250    1572243
> ERR:          0
> MIS:          0
> 
> 
> THey keyboard isn't working either, but we see the i8042..
> 
> serio: i8042 KBD port at 0x60,0x64 irq 1
> 

Are you running irqbalance ?


-- 
Martin Schlemmer

Attachment: signature.asc
Description: This is a digitally signed message part