Re: 2.6.1mm2: nforce2 IDE lockups + debug messages aboutmm/slab.c:1868

[backblue]

Before asking, please checkout the mailing list! I think that topic, it's releated to the one, i have talked, search for a7n8x-x in the lkml, and see.

On Sat, 17 Jan 2004 19:40:26 +0100
Jens Benecke <jens-usenet@xxxxxxxxxxxxxxx> wrote:

> Hi,
> 
> can anybody tell me what the following is about?
> 
> 
> Whenever I mount my CDROM drive and try to access data on it, via KDE's
> Konqueror, my computer locks up hard. Sometimes it does that even while
> mounting the CDROM or DVD.
> 
> (ver_linux and lspci -vvvv output at the end)
> 
> This happened with all 2.6 kernels I've tried so far
> (.0-test11, .0, .1rc1mm1, .1mm2). I've tried to compile all IDE modules
> statically (I cannot use DMA with 2.6 and the IDE drivers compiled as
> modules - this seems to be a known bug) but that didn't change anything.
> 
> I have the NVIDIA binary drivers loaded but this seems to happen without
> NVIDIA drivers as well. And, I keep getting debug messages in syslog:
> 
> 
> Debug: sleeping function called from invalid context at mm/slab.c:1868
> in_atomic():1, irqs_disabled():0
> Call Trace:
>  [<c01297db>] __might_sleep+0xab/0xd0
>  [<c015a4c0>] __kmalloc+0x240/0x260
>  [<f8bf7375>] os_alloc_mem+0x5c/0x87 [nvidia]
>  [<f8c117f0>] _nv001308rm+0x10/0x28 [nvidia]
>  [<f8d29f8d>] _nv001518rm+0x7c9/0xb34 [nvidia]
>  [<f8cae761>] _nv002465rm+0x81/0x420 [nvidia]
>  [<f8cae778>] _nv002465rm+0x98/0x420 [nvidia]
>  [<f8c07365>] _nv001338rm+0x1d/0x24 [nvidia]
>  [<f8bf7f55>] _nv005601rm+0xd/0x34 [nvidia]
>  [<f8bff638>] _nv000858rm+0x300/0xe14 [nvidia]
>  [<c012539e>] try_to_wake_up+0x21e/0x2c0
>  [<c012545e>] wake_up_process+0x1e/0x20
>  [<c0137069>] run_timer_softirq+0x1c9/0x290
>  [<c012623f>] scheduler_tick+0x3f/0x6b0
>  [<f8bfb8ed>] _nv002962rm+0x2c5/0x3b8 [nvidia]
>  [<f8c162a9>] _nv000899rm+0x4c9/0xf70 [nvidia]
>  [<f8c162bc>] _nv000899rm+0x4dc/0xf70 [nvidia]
>  [<f8d72b2f>] _nv000176rm+0x57/0x3ec [nvidia]
>  [<c02c5c19>] dev_queue_xmit+0x389/0x460
>  [<c01dd0e4>] make_cpu_key+0x54/0x60
>  [<c02ea53e>] ip_finish_output+0x10e/0x260
>  [<c01dd8ca>] _get_block_create_0+0x6ea/0x7b0
>  [<c0157e99>] check_poison_obj+0x29/0x1a0
>  [<c015a1da>] kmem_cache_alloc+0x16a/0x210
>  [<c013898d>] send_signal+0x8d/0x140
>  [<c0124d9e>] recalc_task_prio+0x8e/0x1b0
>  [<c01270da>] __wake_up_common+0x3a/0x60
>  [<c02c0d85>] kfree_skbmem+0x25/0x30
>  [<f8d72b2f>] _nv000176rm+0x57/0x3ec [nvidia]
>  [<f8ba9b76>] udp_data_ready+0x1e6/0x2e0 [sunrpc]
>  [<c0124d9e>] recalc_task_prio+0x8e/0x1b0
>  [<c01270da>] __wake_up_common+0x3a/0x60
>  [<f8d72b2f>] _nv000176rm+0x57/0x3ec [nvidia]
>  [<f8d72b2f>] _nv000176rm+0x57/0x3ec [nvidia]
>  [<f8d72b2f>] _nv000176rm+0x57/0x3ec [nvidia]
>  [<f8d72b2f>] _nv000176rm+0x57/0x3ec [nvidia]
>  [<f8c07365>] _nv001338rm+0x1d/0x24 [nvidia]
>  [<f8c2c8ac>] _nv005307rm+0x54/0x544 [nvidia]
>  [<f8cdd09b>] _nv001532rm+0x1f/0x28 [nvidia]
>  [<f8cdd04c>] _nv001534rm+0x20/0x28 [nvidia]
>  [<f8cdd842>] _nv003621rm+0x1a/0x20 [nvidia]
>  [<c0124d9e>] recalc_task_prio+0x8e/0x1b0
>  [<c0157e99>] check_poison_obj+0x29/0x1a0
>  [<c01270da>] __wake_up_common+0x3a/0x60
>  [<c03306c8>] unix_stream_sendmsg+0x2f8/0x4d0
>  [<c02bc805>] sock_sendmsg+0xc5/0xd0
>  [<c02bc9df>] sock_aio_read+0xef/0x100
>  [<c02bcbd1>] sock_readv_writev+0x71/0xa0
>  [<f8c159b1>] rm_ioctl+0x19/0x20 [nvidia]
>  [<f8bf4cbe>] nv_kern_ioctl+0x4de/0x529 [nvidia]
>  [<c01762ed>] do_readv_writev+0x1fd/0x290
>  [<c0136ced>] update_wall_time+0xd/0x40
>  [<c01371ff>] do_timer+0xbf/0xd0
>  [<c01144f7>] timer_interrupt+0x97/0x1f0
>  [<c018c472>] sys_ioctl+0x172/0x340
>  [<c0336a3b>] syscall_call+0x7/0xb
> 
>         
> 
> 
> 
> 
> ds9:jens> . ../.src/2.6.1/2.6.1mm2+r/scripts/ver_linux
> If some fields are empty or look unusual you may have an old version.
> Compare to the current minimal requirements in Documentation/Changes.
> 
> Linux ds9 2.6.1mm2-jb-k7 #4 SMP Tue Jan 13 23:47:40 CET 2004 i686 GNU/Linux
> 
> Gnu C                  3.3.3
> Gnu make               3.80
> util-linux             2.12
> mount                  2.12
> module-init-tools      3.0-pre4
> e2fsprogs              1.35-WIP
> nfs-utils              1.0.6
> Linux C Library        2.3.2
> Dynamic linker (ldd)   2.3.2
> Procps                 3.1.15
> Net-tools              1.60
> Console-tools          0.2.3
> Sh-utils               5.0.91
> Modules Loaded         appletalk ax25 ipx agpgart snd_seq_oss
> snd_seq_midi_event snd_seq snd_pcm_oss snd_mixer_oss snd_ymfpci
> snd_ac97_codec snd_pcm snd_opl3_lib snd_timer snd_hwdep gameport
> snd_page_alloc snd_mpu401_uart snd_rawmidi snd_seq_device snd hid tsdev md5
> ipv6 nfs lockd sunrpc uhci_hcd ohci_hcd evdev raw1394 ohci1394 ieee1394
> scanner sr_mod sg ide_scsi scsi_mod usbmouse ehci_hcd usbcore floppy rtc
> nvidia isofs cdrom tuner tvaudio msp3400 bttv video_buf i2c_algo_bit
> btcx_risc i2c_core v4l2_common videodev soundcore 3c59x nls_iso8859_15
> nls_cp850
> 
> 
> 
> 
> ds9:jens> lspci -vvvv
> 00:00.0 Host bridge: nVidia Corporation nForce2 AGP (different version?)
> (rev c1)
>         Subsystem: Asustek Computer, Inc.: Unknown device 80ac
>         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
>         Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
>         Latency: 0
>         Region 0: Memory at c0000000 (32-bit, prefetchable) [size=128M]
>         Capabilities: <available only to root>
> 
> 00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 1 (rev c1)
>         Subsystem: nVidia Corporation: Unknown device 0c17
>         Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
>         Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> 
> 00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4 (rev c1)
>         Subsystem: nVidia Corporation: Unknown device 0c17
>         Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
>         Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> 
> 00:00.3 RAM memory: nVidia Corporation nForce2 Memory Controller 3 (rev c1)
>         Subsystem: nVidia Corporation: Unknown device 0c17
>         Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
>         Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> 
> 00:00.4 RAM memory: nVidia Corporation nForce2 Memory Controller 2 (rev c1)
>         Subsystem: nVidia Corporation: Unknown device 0c17
>         Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
>         Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> 
> 00:00.5 RAM memory: nVidia Corporation nForce2 Memory Controller 5 (rev c1)
>         Subsystem: nVidia Corporation: Unknown device 0c17
>         Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
>         Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> 
> 00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a4)
>         Subsystem: Asustek Computer, Inc. A7N8X Mainboard
>         Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
>         Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
>         Latency: 0
>         Capabilities: <available only to root>
> 
> 00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2)
>         Subsystem: Asustek Computer, Inc.: Unknown device 0c11
>         Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
>         Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
>         Interrupt: pin A routed to IRQ 23
>         Region 0: I/O ports at c000 [size=32]
>         Capabilities: <available only to root>
> 
> 00:02.0 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4)
> (prog-if 10 [OHCI])
>         Subsystem: Asustek Computer, Inc. A7N8X Mainboard
>         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
>         Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
>         Latency: 0 (750ns min, 250ns max)
>         Interrupt: pin A routed to IRQ 20
>         Region 0: Memory at de086000 (32-bit, non-prefetchable) [size=4K]
>         Capabilities: <available only to root>
> 
> 00:02.1 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4)
> (prog-if 10 [OHCI])
>         Subsystem: Asustek Computer, Inc. A7N8X Mainboard
>         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
>         Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
>         Latency: 0 (750ns min, 250ns max)
>         Interrupt: pin B routed to IRQ 22
>         Region 0: Memory at de081000 (32-bit, non-prefetchable) [size=4K]
>         Capabilities: <available only to root>
> 
> 00:02.2 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4)
> (prog-if 20 [EHCI])
>         Subsystem: Asustek Computer, Inc. A7N8X Mainboard
>         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
>         Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
>         Latency: 0 (750ns min, 250ns max)
>         Interrupt: pin C routed to IRQ 21
>         Region 0: Memory at de082000 (32-bit, non-prefetchable) [size=256]
>         Capabilities: <available only to root>
> 
> 00:04.0 Ethernet controller: nVidia Corporation nForce2 Ethernet Controller
> (rev a1)
>         Subsystem: Asustek Computer, Inc.: Unknown device 80a7
>         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
>         Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
>         Latency: 0 (250ns min, 5000ns max)
>         Interrupt: pin A routed to IRQ 20
>         Region 0: Memory at de083000 (32-bit, non-prefetchable) [size=4K]
>         Region 1: I/O ports at c400 [size=8]
>         Capabilities: <available only to root>
> 
> 00:05.0 Multimedia audio controller: nVidia Corporation nForce MultiMedia
> audio [Via VT82C686B] (rev a2)
>         Subsystem: Asustek Computer, Inc.: Unknown device 0c11
>         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
>         Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
>         Latency: 0 (250ns min, 3000ns max)
>         Interrupt: pin A routed to IRQ 22
>         Region 0: Memory at de000000 (32-bit, non-prefetchable) [size=512K]
>         Capabilities: <available only to root>
> 
> 00:06.0 Multimedia audio controller: nVidia Corporation nForce2 AC97 Audio
> Controler (MCP) (rev a1)
>         Subsystem: Asustek Computer, Inc.: Unknown device 8095
>         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
>         Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
>         Latency: 0 (500ns min, 1250ns max)
>         Interrupt: pin A routed to IRQ 21
>         Region 0: I/O ports at b000 [size=256]
>         Region 1: I/O ports at b400 [size=128]
>         Region 2: Memory at de087000 (32-bit, non-prefetchable) [size=4K]
>         Capabilities: <available only to root>
> 
> 00:08.0 PCI bridge: nVidia Corporation nForce2 External PCI Bridge (rev a3)
> (prog-if 00 [Normal decode])
>         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR+ FastB2B-
>         Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
>         Latency: 0
>         Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
>         I/O behind bridge: 00009000-00009fff
>         Memory behind bridge: dd000000-ddffffff
>         Prefetchable memory behind bridge: d8000000-d8ffffff
>         BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
> 
> 00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2) (prog-if 8a
> [Master SecP PriP])
>         Subsystem: Asustek Computer, Inc.: Unknown device 0c11
>         Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
>         Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
>         Latency: 0 (750ns min, 250ns max)
>         Region 4: I/O ports at f000 [size=16]
>         Capabilities: <available only to root>
> 
> 00:0c.0 PCI bridge: nVidia Corporation nForce2 PCI Bridge (rev a3) (prog-if
> 00 [Normal decode])
>         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR+ FastB2B-
>         Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
>         Latency: 0
>         Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
>         I/O behind bridge: 0000a000-0000afff
>         Memory behind bridge: d9000000-daffffff
>         Prefetchable memory behind bridge: fff00000-000fffff
>         BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
> 
> 00:0d.0 FireWire (IEEE 1394): nVidia Corporation nForce2 FireWire (IEEE
> 1394) Controller (rev a3) (prog-if 10 [OHCI])
>         Subsystem: Asustek Computer, Inc.: Unknown device 809a
>         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
>         Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
>         Latency: 0 (750ns min, 250ns max)
>         Interrupt: pin A routed to IRQ 22
>         Region 0: Memory at de084000 (32-bit, non-prefetchable) [size=2K]
>         Region 1: Memory at de085000 (32-bit, non-prefetchable) [size=64]
>         Capabilities: <available only to root>
> 
> 00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev c1) (prog-if 00
> [Normal decode])
>         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR+ FastB2B-
>         Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
>         Latency: 32
>         Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
>         I/O behind bridge: 0000f000-00000fff
>         Memory behind bridge: db000000-dcffffff
>         Prefetchable memory behind bridge: c8000000-d7ffffff
>         BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
> 
> 01:09.0 Multimedia audio controller: Yamaha Corporation YMF-744B [DS-1S
> Audio Controller] (rev 02)
>         Subsystem: Yamaha Corporation DS-XG PCI Audio CODEC
>         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
>         Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
>         Latency: 32 (1250ns min, 6250ns max)
>         Interrupt: pin A routed to IRQ 17
>         Region 0: Memory at dd000000 (32-bit, non-prefetchable) [size=32K]
>         Region 1: I/O ports at 9000 [size=64]
>         Region 2: I/O ports at 9400 [size=4]
>         Capabilities: <available only to root>
> 
> 01:0a.0 Multimedia video controller: Brooktree Corporation Bt878 Video
> Capture (rev 02)
>         Subsystem: Hauppauge computer works Inc. WinTV Series
>         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
>         Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
>         Latency: 32 (4000ns min, 10000ns max)
>         Interrupt: pin A routed to IRQ 16
>         Region 0: Memory at d8000000 (32-bit, prefetchable) [size=4K]
> 
> 01:0a.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture
> (rev 02)
>         Subsystem: Hauppauge computer works Inc. WinTV Series
>         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
>         Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
>         Latency: 32 (1000ns min, 63750ns max)
>         Interrupt: pin A routed to IRQ 16
>         Region 0: Memory at d8001000 (32-bit, prefetchable) [size=4K]
> 
> 02:01.0 Ethernet controller: 3Com Corporation 3C920B-EMB Integrated Fast
> Ethernet Controller (rev 40)
>         Subsystem: Asustek Computer, Inc.: Unknown device 80ab
>         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
>         Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
>         Latency: 32 (2500ns min, 2500ns max), Cache Line Size: 0x08 (32
> bytes)
>         Interrupt: pin A routed to IRQ 21
>         Region 0: I/O ports at a000 [size=128]
>         Region 1: Memory at da000000 (32-bit, non-prefetchable) [size=128]
>         Expansion ROM at <unassigned> [disabled] [size=128K]
>         Capabilities: <available only to root>
> 
> 03:00.0 VGA compatible controller: nVidia Corporation NV25 [GeForce4 Ti
> 4200] (rev a3) (prog-if 00 [VGA])
>         Subsystem: Micro-Star International Co., Ltd.: Unknown device 8702
>         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
>         Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
>         Latency: 248 (1250ns min, 250ns max)
>         Interrupt: pin A routed to IRQ 19
>         Region 0: Memory at db000000 (32-bit, non-prefetchable) [size=16M]
>         Region 1: Memory at c8000000 (32-bit, prefetchable) [size=128M]
>         Region 2: Memory at d0000000 (32-bit, prefetchable) [size=512K]
>         Expansion ROM at <unassigned> [disabled] [size=128K]
>         Capabilities: <available only to root>
> 
> -- 
> Jens Benecke
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/