TG3: very high CPU usage

[Mark Williams (MWP)]

Greetings all,

Has the TG3 driver been well tested with the AC9100 and compatible gigabit NIC chipsets?

iperf, between a 2.6.0 box and a WinXP box (both running Netgear GA302Ts with the AC9100), shows max throughput of 35MB/sec.

However, when using Apache or any FTP client/daemon, the TG3 driver appears to be VERY slow maxing out CPU usage at 100% while only transfering at around 12MB/sec.
This applies for both incoming or outgoing data.

2.6.1 behaves worse, using 100% CPU usage to maintain approx 9MB/sec rates.

Ive tried other NICs, etc and confirmed that it is a problem with the TG3 driver.

Is this a known problem?

Thanks,
 Mark Williams.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/