Re: Problem: 2.6.1-mm4/5 ACPI ut_allocate error on Dell Inspiron8200

From: Charles Bueche
Date: Wed Jan 21 2004 - 07:55:25 EST

Next message: Marcos D. Marado Torres: "Re: mouse configuration in 2.6.1"
Previous message: Andi Kleen: "Re: 2.6.1-mm4"
In reply to: Chris Scheib: "Problem: 2.6.1-mm4/5 ACPI ut_allocate error on Dell Inspiron 8200"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hi,

same error here with Dell I8600 and kernel 2.6.1-gentoo. The error
message are :

-----------------------
Jan 21 12:38:15 bluez kernel: ACPI-0279: *** Error: Looking up
[BST0] in namespace, AE_ALREADY_EXISTS
Jan 21 12:38:15 bluez kernel: ACPI-1120: *** Error: Method execution
failed [\_SB_.BAT0._BST] (Node f7fe4a60), AE_ALREADY_EXISTS
Jan 21 12:38:15 bluez kernel: -0091: *** Error: ut_allocate:
Attempt to allocate zero bytes
Jan 21 12:38:15 bluez last message repeated 3 times
Jan 21 12:38:15 bluez kernel: ACPI-0279: *** Error: Looking up
[BST0] in namespace, AE_ALREADY_EXISTS
Jan 21 12:38:15 bluez kernel: ACPI-1120: *** Error: Method execution
failed [\_SB_.BAT0._BST] (Node f7fe4a60), AE_ALREADY_EXISTS
Jan 21 12:38:15 bluez kernel: -0091: *** Error: ut_allocate:
Attempt to allocate zero bytes
Jan 21 12:38:15 bluez last message repeated 3 times
-------------------------

sometimes, the ut_allocate error comes 7 times instead of 3. The error
existed since I use 2.6test on this laptop, but what was new with 2.6.1
is the inability to read the battery status from
/proc/acpi/battery/BAT0/*. I think I might have read that a patch exist,
but I'm waiting for 2.6.2 to try again.

Getting a proper ACPI suspend on this hardware would be good as well,
but I think Dell bioses are just too broken to have any hope for this
feature.

Charles

On Tue, 2004-01-20 at 19:32, Chris Scheib wrote:
> I recently noticed a problem with ACPI when I patched my kernel to
> -mm4 or -mm5. Upon initialization of ACPI, I repeatedly get the error
> "-0091: *** Error: ut_allocate: Attempt to allocate zero bytes". After
> the kernel is loaded, I am not able to retrieve any battery stats. When
> I try to look at the battery stats, it repeats the ut_allocate error
> again. After googling, I discovered that turning on Relaxed AML
> Checking might fix this. After a recompile, I found out it didn't. I
> have had no problems with ACPI up until -mm4 and -mm5, vanilla 2.6.1 and
> under work fine.
>
> Please include me in any replies, as I am not subscribed to LKML
> (although I do read the archives @MARC). If you need more information
> about my hardware, or output from any commands, just ask.
>
> Thanks,
> Christopher J. Scheib
> schweeb@xxxxxxxxxxxxx
>
> System Info:
>
> Dell Inspiron 8200
> 1.7Ghz P4-M
> 640Mb SO-DIMM DDR RAM
> NVIDIA GeForce4 440-Go 64Mb
> 40Gb HDD
> Debian Sid
>
>
> Here's dmesg output, with a few events surrounding what occurred:
>
> USB Mass Storage support registered.
> XFS mounting filesystem hda2
> Ending clean XFS mount for filesystem: hda2
> XFS mounting filesystem hda6
> Ending clean XFS mount for filesystem: hda6
> ACPI: AC Adapter [AC] (on-line)
> ACPI: Battery Slot [BAT0] (battery present)
> -0091: *** Error: ut_allocate: Attempt to allocate zero bytes
> -0091: *** Error: ut_allocate: Attempt to allocate zero bytes
> -0091: *** Error: ut_allocate: Attempt to allocate zero bytes
> -0091: *** Error: ut_allocate: Attempt to allocate zero bytes
> ACPI: Battery Slot [BAT1] (battery present)
> ACPI: Lid Switch [LID]
> ACPI: Power Button (CM) [PBTN]
> ACPI: Sleep Button (CM) [SBTN]
> ACPI: Processor [CPU0] (supports C1 C2, 8 throttling states)
> ACPI: Thermal Zone [THM] (25 C)
> PCI: Setting latency timer of device 0000:00:1f.5 to 64
> MC'97 1 converters and GPIO not ready (0xff00)
>
> Here is my kernel .config:
>
> #
> # Automatically generated make config: don't edit
> #
> CONFIG_X86=y
> CONFIG_MMU=y
> CONFIG_UID16=y
> CONFIG_GENERIC_ISA_DMA=y
>
> #
> # Code maturity level options
> #
> CONFIG_EXPERIMENTAL=y
> CONFIG_CLEAN_COMPILE=y
> CONFIG_STANDALONE=y
> CONFIG_BROKEN_ON_SMP=y
>
> #
> # General setup
> #
> CONFIG_SWAP=y
> CONFIG_SYSVIPC=y
> CONFIG_BSD_PROCESS_ACCT=y
> CONFIG_SYSCTL=y
> CONFIG_LOG_BUF_SHIFT=14
> CONFIG_IKCONFIG=y
> CONFIG_IKCONFIG_PROC=y
> # CONFIG_EMBEDDED is not set
> CONFIG_KALLSYMS=y
> CONFIG_FUTEX=y
> CONFIG_EPOLL=y
> CONFIG_IOSCHED_NOOP=y
> CONFIG_IOSCHED_AS=y
> CONFIG_IOSCHED_DEADLINE=y
> CONFIG_IOSCHED_CFQ=y
> # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
>
> #
> # Loadable module support
> #
> CONFIG_MODULES=y
> CONFIG_MODULE_UNLOAD=y
> # CONFIG_MODULE_FORCE_UNLOAD is not set
> CONFIG_OBSOLETE_MODPARM=y
> # CONFIG_MODVERSIONS is not set
> CONFIG_KMOD=y
>
> #
> # Processor type and features
> #
> CONFIG_X86_PC=y
> # CONFIG_X86_ELAN is not set
> # CONFIG_X86_VOYAGER is not set
> # CONFIG_X86_NUMAQ is not set
> # CONFIG_X86_SUMMIT is not set
> # CONFIG_X86_BIGSMP is not set
> # CONFIG_X86_VISWS is not set
> # CONFIG_X86_GENERICARCH is not set
> # CONFIG_X86_ES7000 is not set
>
> #
> # Processor support
> #
>
> #
> # Select all processors your kernel should support
> #
> # CONFIG_CPU_386 is not set
> # CONFIG_CPU_486 is not set
> # CONFIG_CPU_586 is not set
> # CONFIG_CPU_586TSC is not set
> # CONFIG_CPU_586MMX is not set
> # CONFIG_CPU_686 is not set
> # CONFIG_CPU_PENTIUMII is not set
> # CONFIG_CPU_PENTIUMIII is not set
> # CONFIG_CPU_PENTIUMM is not set
> CONFIG_CPU_PENTIUM4=y
> # CONFIG_CPU_K6 is not set
> # CONFIG_CPU_K7 is not set
> # CONFIG_CPU_K8 is not set
> # CONFIG_CPU_CRUSOE is not set
> # CONFIG_CPU_WINCHIPC6 is not set
> # CONFIG_CPU_WINCHIP2 is not set
> # CONFIG_CPU_WINCHIP3D is not set
> # CONFIG_CPU_CYRIXIII is not set
> # CONFIG_CPU_VIAC3_2 is not set
> CONFIG_CPU_INTEL=y
> CONFIG_X86_CMPXCHG=y
> CONFIG_X86_XADD=y
> CONFIG_X86_L1_CACHE_SHIFT=7
> CONFIG_RWSEM_XCHGADD_ALGORITHM=y
> CONFIG_X86_WP_WORKS_OK=y
> CONFIG_X86_INVLPG=y
> CONFIG_X86_BSWAP=y
> CONFIG_X86_POPAD_OK=y
> CONFIG_X86_INTEL_USERCOPY=y
> CONFIG_X86_USE_PPRO_CHECKSUM=y
> # CONFIG_X86_4G is not set
> # CONFIG_X86_SWITCH_PAGETABLES is not set
> # CONFIG_X86_4G_VM_LAYOUT is not set
> # CONFIG_X86_UACCESS_INDIRECT is not set
> # CONFIG_X86_HIGH_ENTRY is not set
> CONFIG_HPET_TIMER=y
> CONFIG_HPET_EMULATE_RTC=y
> # CONFIG_SMP is not set
> CONFIG_PREEMPT=y
> CONFIG_X86_UP_APIC=y
> CONFIG_X86_UP_IOAPIC=y
> CONFIG_X86_LOCAL_APIC=y
> CONFIG_X86_IO_APIC=y
> CONFIG_X86_TSC=y
> CONFIG_X86_MCE=y
> CONFIG_X86_MCE_NONFATAL=y
> CONFIG_X86_MCE_P4THERMAL=y
> # CONFIG_TOSHIBA is not set
> CONFIG_I8K=m
> CONFIG_MICROCODE=m
> # CONFIG_X86_MSR is not set
> CONFIG_X86_CPUID=m
> # CONFIG_EDD is not set
> CONFIG_NOHIGHMEM=y
> # CONFIG_HIGHMEM4G is not set
> # CONFIG_HIGHMEM64G is not set
> # CONFIG_MATH_EMULATION is not set
> CONFIG_MTRR=y
> # CONFIG_EFI is not set
> CONFIG_HAVE_DEC_LOCK=y
> # CONFIG_REGPARM is not set
>
> #
> # Power management options (ACPI, APM)
> #
> CONFIG_PM=y
> CONFIG_SOFTWARE_SUSPEND=y
> # CONFIG_PM_DISK is not set
>
> #
> # ACPI (Advanced Configuration and Power Interface) Support
> #
> CONFIG_ACPI=y
> CONFIG_ACPI_BOOT=y
> CONFIG_ACPI_INTERPRETER=y
> # CONFIG_ACPI_SLEEP is not set
> CONFIG_ACPI_AC=m
> CONFIG_ACPI_BATTERY=m
> CONFIG_ACPI_BUTTON=m
> CONFIG_ACPI_FAN=m
> CONFIG_ACPI_PROCESSOR=m
> CONFIG_ACPI_THERMAL=m
> # CONFIG_ACPI_ASUS is not set
> # CONFIG_ACPI_TOSHIBA is not set
> # CONFIG_ACPI_DEBUG is not set
> CONFIG_ACPI_BUS=y
> CONFIG_ACPI_EC=y
> CONFIG_ACPI_POWER=y
> CONFIG_ACPI_PCI=y
> CONFIG_ACPI_SYSTEM=y
> CONFIG_ACPI_RELAXED_AML=y
> CONFIG_X86_PM_TIMER=y
>
> #
> # APM (Advanced Power Management) BIOS Support
> #
> # CONFIG_APM is not set
>
> #
> # CPU Frequency scaling
> #
> CONFIG_CPU_FREQ=y
> CONFIG_CPU_FREQ_PROC_INTF=m
> CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
> # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
> CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
> CONFIG_CPU_FREQ_GOV_POWERSAVE=y
> CONFIG_CPU_FREQ_GOV_USERSPACE=m
> CONFIG_CPU_FREQ_24_API=y
> CONFIG_CPU_FREQ_TABLE=y
>
> #
> # CPUFreq processor drivers
> #
> CONFIG_X86_ACPI_CPUFREQ=m
> # CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
> # CONFIG_X86_POWERNOW_K6 is not set
> # CONFIG_X86_POWERNOW_K7 is not set
> # CONFIG_X86_POWERNOW_K8 is not set
> # CONFIG_X86_GX_SUSPMOD is not set
> # CONFIG_X86_SPEEDSTEP_CENTRINO is not set
> CONFIG_X86_SPEEDSTEP_ICH=y
> # CONFIG_X86_SPEEDSTEP_SMI is not set
> # CONFIG_X86_P4_CLOCKMOD is not set
> CONFIG_X86_SPEEDSTEP_LIB=y
> # CONFIG_X86_LONGRUN is not set
> # CONFIG_X86_LONGHAUL is not set
>
> #
> # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
> #
> CONFIG_PCI=y
> # CONFIG_PCI_GOBIOS is not set
> # CONFIG_PCI_GODIRECT is not set
> CONFIG_PCI_GOANY=y
> CONFIG_PCI_BIOS=y
> CONFIG_PCI_DIRECT=y
> # CONFIG_PCI_USE_VECTOR is not set
> # CONFIG_PCI_LEGACY_PROC is not set
> CONFIG_PCI_NAMES=y
> CONFIG_ISA=y
> # CONFIG_EISA is not set
> # CONFIG_MCA is not set
> # CONFIG_SCx200 is not set
> CONFIG_HOTPLUG=y
>
> #
> # PCMCIA/CardBus support
> #
> CONFIG_PCMCIA=m
> # CONFIG_PCMCIA_COMPAT is not set
> CONFIG_YENTA=m
> CONFIG_CARDBUS=y
> # CONFIG_I82092 is not set
> # CONFIG_I82365 is not set
> # CONFIG_TCIC is not set
> CONFIG_PCMCIA_PROBE=y
>
> #
> # PCI Hotplug Support
> #
> # CONFIG_HOTPLUG_PCI is not set
>
> #
> # Executable file formats
> #
> CONFIG_BINFMT_ELF=y
> CONFIG_BINFMT_AOUT=m
> CONFIG_BINFMT_MISC=m
>
> #
> # Device Drivers
> #
>
> #
> # Generic Driver Options
> #
> CONFIG_FW_LOADER=y
>
> #
> # Memory Technology Devices (MTD)
> #
> # CONFIG_MTD is not set
>
> #
> # Parallel port support
> #
> # CONFIG_PARPORT is not set
>
> #
> # Plug and Play support
> #
> CONFIG_PNP=y
> # CONFIG_PNP_DEBUG is not set
>
> #
> # Protocols
> #
> # CONFIG_ISAPNP is not set
> CONFIG_PNPBIOS=y
> # CONFIG_PNPBIOS_PROC_FS is not set
>
> #
> # Block devices
> #
> CONFIG_BLK_DEV_FD=m
> # CONFIG_BLK_DEV_XD is not set
> # CONFIG_BLK_CPQ_DA is not set
> # CONFIG_BLK_CPQ_CISS_DA is not set
> # CONFIG_BLK_DEV_DAC960 is not set
> # CONFIG_BLK_DEV_UMEM is not set
> CONFIG_BLK_DEV_LOOP=y
> # CONFIG_BLK_DEV_CRYPTOLOOP is not set
> CONFIG_BLK_DEV_NBD=m
> CONFIG_BLK_DEV_RAM=m
> CONFIG_BLK_DEV_RAM_SIZE=4096
> # CONFIG_BLK_DEV_INITRD is not set
> # CONFIG_LBD is not set
>
> #
> # ATA/ATAPI/MFM/RLL support
> #
> CONFIG_IDE=y
> CONFIG_BLK_DEV_IDE=y
>
> #
> # Please see Documentation/ide.txt for help/info on IDE drives
> #
> # CONFIG_BLK_DEV_HD_IDE is not set
> CONFIG_BLK_DEV_IDEDISK=y
> # CONFIG_IDEDISK_MULTI_MODE is not set
> # CONFIG_IDEDISK_STROKE is not set
> # CONFIG_BLK_DEV_IDECS is not set
> CONFIG_BLK_DEV_IDECD=m
> # CONFIG_BLK_DEV_IDETAPE is not set
> # CONFIG_BLK_DEV_IDEFLOPPY is not set
> # CONFIG_BLK_DEV_IDESCSI is not set
> # CONFIG_IDE_TASK_IOCTL is not set
> # CONFIG_IDE_TASKFILE_IO is not set
>
> #
> # IDE chipset support/bugfixes
> #
> CONFIG_IDE_GENERIC=y
> # CONFIG_BLK_DEV_CMD640 is not set
> # CONFIG_BLK_DEV_IDEPNP is not set
> CONFIG_BLK_DEV_IDEPCI=y
> CONFIG_IDEPCI_SHARE_IRQ=y
> # CONFIG_BLK_DEV_OFFBOARD is not set
> # CONFIG_BLK_DEV_GENERIC is not set
> # CONFIG_BLK_DEV_OPTI621 is not set
> # CONFIG_BLK_DEV_RZ1000 is not set
> CONFIG_BLK_DEV_IDEDMA_PCI=y
> # CONFIG_BLK_DEV_IDEDMA_FORCED is not set
> CONFIG_IDEDMA_PCI_AUTO=y
> # CONFIG_IDEDMA_ONLYDISK is not set
> # CONFIG_IDEDMA_PCI_WIP is not set
> CONFIG_BLK_DEV_ADMA=y
> # CONFIG_BLK_DEV_AEC62XX is not set
> # CONFIG_BLK_DEV_ALI15X3 is not set
> # CONFIG_BLK_DEV_AMD74XX is not set
> # CONFIG_BLK_DEV_CMD64X is not set
> # CONFIG_BLK_DEV_TRIFLEX is not set
> # CONFIG_BLK_DEV_CY82C693 is not set
> # CONFIG_BLK_DEV_CS5520 is not set
> # CONFIG_BLK_DEV_CS5530 is not set
> # CONFIG_BLK_DEV_HPT34X is not set
> # CONFIG_BLK_DEV_HPT366 is not set
> # CONFIG_BLK_DEV_SC1200 is not set
> CONFIG_BLK_DEV_PIIX=y
> # CONFIG_BLK_DEV_NS87415 is not set
> # CONFIG_BLK_DEV_PDC202XX_OLD is not set
> # CONFIG_BLK_DEV_PDC202XX_NEW is not set
> # CONFIG_BLK_DEV_SVWKS is not set
> # CONFIG_BLK_DEV_SIIMAGE is not set
> # CONFIG_BLK_DEV_SIS5513 is not set
> # CONFIG_BLK_DEV_SLC90E66 is not set
> # CONFIG_BLK_DEV_TRM290 is not set
> # CONFIG_BLK_DEV_VIA82CXXX is not set
> # CONFIG_IDE_CHIPSETS is not set
> CONFIG_BLK_DEV_IDEDMA=y
> # CONFIG_IDEDMA_IVB is not set
> CONFIG_IDEDMA_AUTO=y
> # CONFIG_DMA_NONPCI is not set
> # CONFIG_BLK_DEV_HD is not set
>
> #
> # SCSI device support
> #
> CONFIG_SCSI=y
> CONFIG_SCSI_PROC_FS=y
>
> #
> # SCSI support type (disk, tape, CD-ROM)
> #
> CONFIG_BLK_DEV_SD=m
> CONFIG_MAX_SD_DISKS=256
> # CONFIG_CHR_DEV_ST is not set
> # CONFIG_CHR_DEV_OSST is not set
> CONFIG_BLK_DEV_SR=m
> # CONFIG_BLK_DEV_SR_VENDOR is not set
> CONFIG_CHR_DEV_SG=m
>
> #
> # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
> #
> # CONFIG_SCSI_MULTI_LUN is not set
> # CONFIG_SCSI_REPORT_LUNS is not set
> # CONFIG_SCSI_CONSTANTS is not set
> # CONFIG_SCSI_LOGGING is not set
>
> #
> # SCSI low-level drivers
> #
> # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
> # CONFIG_SCSI_7000FASST is not set
> # CONFIG_SCSI_ACARD is not set
> # CONFIG_SCSI_AHA152X is not set
> # CONFIG_SCSI_AHA1542 is not set
> # CONFIG_SCSI_AACRAID is not set
> # CONFIG_SCSI_AIC7XXX is not set
> # CONFIG_SCSI_AIC7XXX_OLD is not set
> # CONFIG_SCSI_AIC79XX is not set
> # CONFIG_SCSI_ADVANSYS is not set
> # CONFIG_SCSI_IN2000 is not set
> # CONFIG_SCSI_MEGARAID is not set
> # CONFIG_SCSI_SATA is not set
> # CONFIG_SCSI_BUSLOGIC is not set
> # CONFIG_SCSI_CPQFCTS is not set
> # CONFIG_SCSI_DMX3191D is not set
> # CONFIG_SCSI_DTC3280 is not set
> # CONFIG_SCSI_EATA is not set
> # CONFIG_SCSI_EATA_PIO is not set
> # CONFIG_SCSI_FUTURE_DOMAIN is not set
> # CONFIG_SCSI_GDTH is not set
> # CONFIG_SCSI_GENERIC_NCR5380 is not set
> # CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
> # CONFIG_SCSI_IPS is not set
> # CONFIG_SCSI_INIA100 is not set
> # CONFIG_SCSI_NCR53C406A is not set
> # CONFIG_SCSI_SYM53C8XX_2 is not set
> # CONFIG_SCSI_PAS16 is not set
> # CONFIG_SCSI_PSI240I is not set
> # CONFIG_SCSI_QLOGIC_FAS is not set
> # CONFIG_SCSI_QLOGIC_ISP is not set
> # CONFIG_SCSI_QLOGIC_FC is not set
> # CONFIG_SCSI_QLOGIC_1280 is not set
> CONFIG_SCSI_QLA2XXX_CONFIG=y
> # CONFIG_SCSI_QLA21XX is not set
> # CONFIG_SCSI_QLA22XX is not set
> # CONFIG_SCSI_QLA23XX is not set
> # CONFIG_SCSI_SYM53C416 is not set
> # CONFIG_SCSI_DC395x is not set
> # CONFIG_SCSI_DC390T is not set
> # CONFIG_SCSI_T128 is not set
> # CONFIG_SCSI_U14_34F is not set
> # CONFIG_SCSI_ULTRASTOR is not set
> # CONFIG_SCSI_NSP32 is not set
> # CONFIG_SCSI_DEBUG is not set
>
> #
> # PCMCIA SCSI adapter support
> #
> # CONFIG_PCMCIA_AHA152X is not set
> # CONFIG_PCMCIA_FDOMAIN is not set
> # CONFIG_PCMCIA_NINJA_SCSI is not set
> # CONFIG_PCMCIA_QLOGIC is not set
>
> #
> # Old CD-ROM drivers (not SCSI, not IDE)
> #
> # CONFIG_CD_NO_IDESCSI is not set
>
> #
> # Multi-device support (RAID and LVM)
> #
> # CONFIG_MD is not set
>
> #
> # Fusion MPT device support
> #
> # CONFIG_FUSION is not set
>
> #
> # IEEE 1394 (FireWire) support (EXPERIMENTAL)
> #
> CONFIG_IEEE1394=m
>
> #
> # Subsystem Options
> #
> # CONFIG_IEEE1394_VERBOSEDEBUG is not set
> # CONFIG_IEEE1394_OUI_DB is not set
>
> #
> # Device Drivers
> #
>
> #
> # Texas Instruments PCILynx requires I2C
> #
> CONFIG_IEEE1394_OHCI1394=m
>
> #
> # Protocol Drivers
> #
> CONFIG_IEEE1394_VIDEO1394=m
> CONFIG_IEEE1394_SBP2=m
> CONFIG_IEEE1394_SBP2_PHYS_DMA=y
> CONFIG_IEEE1394_ETH1394=m
> CONFIG_IEEE1394_DV1394=m
> CONFIG_IEEE1394_RAWIO=m
> CONFIG_IEEE1394_CMP=m
> CONFIG_IEEE1394_AMDTP=m
>
> #
> # I2O device support
> #
> # CONFIG_I2O is not set
>
> #
> # Networking support
> #
> CONFIG_NET=y
>
> #
> # Networking options
> #
> CONFIG_PACKET=y
> # CONFIG_PACKET_MMAP is not set
> CONFIG_NETLINK_DEV=m
> CONFIG_UNIX=y
> # CONFIG_NET_KEY is not set
> CONFIG_INET=y
> CONFIG_IP_MULTICAST=y
> # CONFIG_IP_ADVANCED_ROUTER is not set
> # CONFIG_IP_PNP is not set
> CONFIG_NET_IPIP=m
> CONFIG_NET_IPGRE=m
> # CONFIG_NET_IPGRE_BROADCAST is not set
> # CONFIG_IP_MROUTE is not set
> # CONFIG_ARPD is not set
> # CONFIG_INET_ECN is not set
> CONFIG_SYN_COOKIES=y
> # CONFIG_INET_AH is not set
> # CONFIG_INET_ESP is not set
> # CONFIG_INET_IPCOMP is not set
>
> #
> # IP: Virtual Server Configuration
> #
> # CONFIG_IP_VS is not set
> # CONFIG_IPV6 is not set
> # CONFIG_DECNET is not set
> # CONFIG_BRIDGE is not set
> CONFIG_NETFILTER=y
> # CONFIG_NETFILTER_DEBUG is not set
>
> #
> # IP: Netfilter Configuration
> #
> CONFIG_IP_NF_CONNTRACK=m
> CONFIG_IP_NF_FTP=m
> CONFIG_IP_NF_IRC=m
> # CONFIG_IP_NF_TFTP is not set
> # CONFIG_IP_NF_AMANDA is not set
> CONFIG_IP_NF_QUEUE=m
> CONFIG_IP_NF_IPTABLES=m
> CONFIG_IP_NF_MATCH_LIMIT=m
> # CONFIG_IP_NF_MATCH_IPRANGE is not set
> CONFIG_IP_NF_MATCH_MAC=m
> CONFIG_IP_NF_MATCH_PKTTYPE=m
> CONFIG_IP_NF_MATCH_MARK=m
> CONFIG_IP_NF_MATCH_MULTIPORT=m
> CONFIG_IP_NF_MATCH_TOS=m
> # CONFIG_IP_NF_MATCH_RECENT is not set
> CONFIG_IP_NF_MATCH_ECN=m
> CONFIG_IP_NF_MATCH_DSCP=m
> # CONFIG_IP_NF_MATCH_AH_ESP is not set
> CONFIG_IP_NF_MATCH_LENGTH=m
> CONFIG_IP_NF_MATCH_TTL=m
> CONFIG_IP_NF_MATCH_TCPMSS=m
> CONFIG_IP_NF_MATCH_HELPER=m
> CONFIG_IP_NF_MATCH_STATE=m
> CONFIG_IP_NF_MATCH_CONNTRACK=m
> CONFIG_IP_NF_MATCH_OWNER=m
> CONFIG_IP_NF_FILTER=m
> CONFIG_IP_NF_TARGET_REJECT=m
> CONFIG_IP_NF_NAT=m
> CONFIG_IP_NF_NAT_NEEDED=y
> CONFIG_IP_NF_TARGET_MASQUERADE=m
> CONFIG_IP_NF_TARGET_REDIRECT=m
> CONFIG_IP_NF_TARGET_NETMAP=m
> # CONFIG_IP_NF_TARGET_SAME is not set
> # CONFIG_IP_NF_NAT_LOCAL is not set
> CONFIG_IP_NF_NAT_SNMP_BASIC=m
> CONFIG_IP_NF_NAT_IRC=m
> CONFIG_IP_NF_NAT_FTP=m
> CONFIG_IP_NF_MANGLE=m
> CONFIG_IP_NF_TARGET_TOS=m
> CONFIG_IP_NF_TARGET_ECN=m
> CONFIG_IP_NF_TARGET_DSCP=m
> CONFIG_IP_NF_TARGET_MARK=m
> CONFIG_IP_NF_TARGET_CLASSIFY=m
> CONFIG_IP_NF_TARGET_LOG=m
> # CONFIG_IP_NF_TARGET_ULOG is not set
> CONFIG_IP_NF_TARGET_TCPMSS=m
> CONFIG_IP_NF_ARPTABLES=m
> CONFIG_IP_NF_ARPFILTER=m
> # CONFIG_IP_NF_ARP_MANGLE is not set
> CONFIG_IP_NF_COMPAT_IPCHAINS=m
> CONFIG_IP_NF_COMPAT_IPFWADM=m
> CONFIG_XFRM=y
> # CONFIG_XFRM_USER is not set
>
> #
> # SCTP Configuration (EXPERIMENTAL)
> #
> CONFIG_IPV6_SCTP__=y
> # CONFIG_IP_SCTP is not set
> # CONFIG_ATM is not set
> # CONFIG_VLAN_8021Q is not set
> # CONFIG_LLC2 is not set
> # CONFIG_IPX is not set
> # CONFIG_ATALK is not set
> # CONFIG_X25 is not set
> # CONFIG_LAPB is not set
> # CONFIG_NET_DIVERT is not set
> # CONFIG_ECONET is not set
> # CONFIG_WAN_ROUTER is not set
> # CONFIG_NET_FASTROUTE is not set
> # CONFIG_NET_HW_FLOWCONTROL is not set
>
> #
> # QoS and/or fair queueing
> #
> # CONFIG_NET_SCHED is not set
>
> #
> # Network testing
> #
> # CONFIG_NET_PKTGEN is not set
> CONFIG_NETDEVICES=y
>
> #
> # ARCnet devices
> #
> # CONFIG_ARCNET is not set
> # CONFIG_DUMMY is not set
> # CONFIG_BONDING is not set
> # CONFIG_EQUALIZER is not set
> CONFIG_TUN=m
> # CONFIG_ETHERTAP is not set
> # CONFIG_NET_SB1000 is not set
>
> #
> # Ethernet (10 or 100Mbit)
> #
> CONFIG_NET_ETHERNET=y
> CONFIG_MII=m
> # CONFIG_HAPPYMEAL is not set
> # CONFIG_SUNGEM is not set
> CONFIG_NET_VENDOR_3COM=y
> # CONFIG_EL1 is not set
> # CONFIG_EL2 is not set
> # CONFIG_ELPLUS is not set
> # CONFIG_EL16 is not set
> # CONFIG_EL3 is not set
> # CONFIG_3C515 is not set
> CONFIG_VORTEX=m
> # CONFIG_TYPHOON is not set
> # CONFIG_LANCE is not set
> # CONFIG_NET_VENDOR_SMC is not set
> # CONFIG_NET_VENDOR_RACAL is not set
>
> #
> # Tulip family network device support
> #
> # CONFIG_NET_TULIP is not set
> # CONFIG_AT1700 is not set
> # CONFIG_DEPCA is not set
> # CONFIG_HP100 is not set
> # CONFIG_NET_ISA is not set
> # CONFIG_NET_PCI is not set
> # CONFIG_NET_POCKET is not set
>
> #
> # Ethernet (1000 Mbit)
> #
> # CONFIG_ACENIC is not set
> # CONFIG_DL2K is not set
> # CONFIG_E1000 is not set
> # CONFIG_NS83820 is not set
> # CONFIG_HAMACHI is not set
> # CONFIG_YELLOWFIN is not set
> # CONFIG_R8169 is not set
> # CONFIG_SIS190 is not set
> # CONFIG_SK98LIN is not set
> # CONFIG_TIGON3 is not set
>
> #
> # Ethernet (10000 Mbit)
> #
> # CONFIG_IXGB is not set
> # CONFIG_FDDI is not set
> # CONFIG_HIPPI is not set
> # CONFIG_PPP is not set
> # CONFIG_SLIP is not set
>
> #
> # Wireless LAN (non-hamradio)
> #
> CONFIG_NET_RADIO=y
>
> #
> # Obsolete Wireless cards support (pre-802.11)
> #
> # CONFIG_STRIP is not set
> # CONFIG_ARLAN is not set
> # CONFIG_WAVELAN is not set
> # CONFIG_PCMCIA_WAVELAN is not set
> # CONFIG_PCMCIA_NETWAVE is not set
>
> #
> # Wireless 802.11 Frequency Hopping cards support
> #
> # CONFIG_PCMCIA_RAYCS is not set
>
> #
> # Wireless 802.11b ISA/PCI cards support
> #
> # CONFIG_AIRO is not set
> CONFIG_HERMES=m
> # CONFIG_PLX_HERMES is not set
> # CONFIG_TMD_HERMES is not set
> # CONFIG_PCI_HERMES is not set
>
> #
> # Wireless 802.11b Pcmcia/Cardbus cards support
> #
> CONFIG_PCMCIA_HERMES=m
> # CONFIG_AIRO_CS is not set
> CONFIG_PCMCIA_ATMEL=m
> # CONFIG_PCMCIA_WL3501 is not set
> CONFIG_NET_WIRELESS=y
>
> #
> # Token Ring devices
> #
> # CONFIG_TR is not set
> # CONFIG_NET_FC is not set
> # CONFIG_RCPCI is not set
> # CONFIG_SHAPER is not set
> # CONFIG_NETCONSOLE is not set
>
> #
> # Wan interfaces
> #
> # CONFIG_WAN is not set
>
> #
> # PCMCIA network device support
> #
> # CONFIG_NET_PCMCIA is not set
>
> #
> # Amateur Radio support
> #
> # CONFIG_HAMRADIO is not set
>
> #
> # IrDA (infrared) support
> #
> # CONFIG_IRDA is not set
>
> #
> # Bluetooth support
> #
> # CONFIG_BT is not set
> # CONFIG_KGDBOE is not set
> # CONFIG_NETPOLL is not set
> # CONFIG_NETPOLL_RX is not set
> # CONFIG_NETPOLL_TRAP is not set
> # CONFIG_NET_POLL_CONTROLLER is not set
>
> #
> # ISDN subsystem
> #
> # CONFIG_ISDN_BOOL is not set
>
> #
> # Telephony Support
> #
> # CONFIG_PHONE is not set
>
> #
> # Input device support
> #
> CONFIG_INPUT=y
>
> #
> # Userland interfaces
> #
> CONFIG_INPUT_MOUSEDEV=y
> CONFIG_INPUT_MOUSEDEV_PSAUX=y
> CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
> CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
> # CONFIG_INPUT_JOYDEV is not set
> # CONFIG_INPUT_TSDEV is not set
> CONFIG_INPUT_EVDEV=m
> # CONFIG_INPUT_EVBUG is not set
>
> #
> # Input I/O drivers
> #
> # CONFIG_GAMEPORT is not set
> CONFIG_SOUND_GAMEPORT=y
> CONFIG_SERIO=y
> CONFIG_SERIO_I8042=y
> CONFIG_SERIO_SERPORT=y
> # CONFIG_SERIO_CT82C710 is not set
> # CONFIG_SERIO_PCIPS2 is not set
>
> #
> # Input Device Drivers
> #
> CONFIG_INPUT_KEYBOARD=y
> CONFIG_KEYBOARD_ATKBD=y
> # CONFIG_KEYBOARD_SUNKBD is not set
> # CONFIG_KEYBOARD_XTKBD is not set
> # CONFIG_KEYBOARD_NEWTON is not set
> CONFIG_INPUT_MOUSE=y
> CONFIG_MOUSE_PS2=m
> # CONFIG_MOUSE_SERIAL is not set
> # CONFIG_MOUSE_INPORT is not set
> # CONFIG_MOUSE_LOGIBM is not set
> # CONFIG_MOUSE_PC110PAD is not set
> # CONFIG_INPUT_JOYSTICK is not set
> # CONFIG_INPUT_TOUCHSCREEN is not set
> # CONFIG_INPUT_MISC is not set
>
> #
> # Character devices
> #
> CONFIG_VT=y
> CONFIG_VT_CONSOLE=y
> CONFIG_HW_CONSOLE=y
> # CONFIG_SERIAL_NONSTANDARD is not set
>
> #
> # Serial drivers
> #
> CONFIG_SERIAL_8250=m
> # CONFIG_SERIAL_8250_CS is not set
> # CONFIG_SERIAL_8250_ACPI is not set
> CONFIG_SERIAL_8250_NR_UARTS=4
> # CONFIG_SERIAL_8250_EXTENDED is not set
>
> #
> # Non-8250 serial port support
> #
> CONFIG_SERIAL_CORE=m
> CONFIG_UNIX98_PTYS=y
> CONFIG_UNIX98_PTY_COUNT=256
>
> #
> # Mice
> #
> # CONFIG_BUSMOUSE is not set
> # CONFIG_QIC02_TAPE is not set
>
> #
> # IPMI
> #
> # CONFIG_IPMI_HANDLER is not set
>
> #
> # Watchdog Cards
> #
> # CONFIG_WATCHDOG is not set
> # CONFIG_HW_RANDOM is not set
> CONFIG_NVRAM=m
> CONFIG_RTC=y
> # CONFIG_DTLK is not set
> # CONFIG_R3964 is not set
> # CONFIG_APPLICOM is not set
> # CONFIG_SONYPI is not set
>
> #
> # Ftape, the floppy tape device driver
> #
> # CONFIG_FTAPE is not set
> CONFIG_AGP=m
> # CONFIG_AGP_ALI is not set
> # CONFIG_AGP_ATI is not set
> # CONFIG_AGP_AMD is not set
> # CONFIG_AGP_AMD64 is not set
> # CONFIG_AGP_INTEL is not set
> # CONFIG_AGP_NVIDIA is not set
> # CONFIG_AGP_SIS is not set
> # CONFIG_AGP_SWORKS is not set
> # CONFIG_AGP_VIA is not set
> # CONFIG_DRM is not set
>
> #
> # PCMCIA character devices
> #
> # CONFIG_SYNCLINK_CS is not set
> # CONFIG_MWAVE is not set
> # CONFIG_RAW_DRIVER is not set
> # CONFIG_HANGCHECK_TIMER is not set
>
> #
> # I2C support
> #
> # CONFIG_I2C is not set
>
> #
> # Multimedia devices
> #
> # CONFIG_VIDEO_DEV is not set
>
> #
> # Digital Video Broadcasting Devices
> #
> # CONFIG_DVB is not set
>
> #
> # Graphics support
> #
> CONFIG_FB=y
> # CONFIG_FB_CYBER2000 is not set
> # CONFIG_FB_IMSTT is not set
> # CONFIG_FB_VGA16 is not set
> CONFIG_FB_VESA=y
> CONFIG_VIDEO_SELECT=y
> # CONFIG_FB_HGA is not set
> # CONFIG_FB_RIVA is not set
> # CONFIG_FB_MATROX is not set
> # CONFIG_FB_RADEON is not set
> # CONFIG_FB_ATY128 is not set
> # CONFIG_FB_ATY is not set
> # CONFIG_FB_SIS is not set
> # CONFIG_FB_NEOMAGIC is not set
> # CONFIG_FB_KYRO is not set
> # CONFIG_FB_3DFX is not set
> # CONFIG_FB_VOODOO1 is not set
> # CONFIG_FB_TRIDENT is not set
> # CONFIG_FB_VIRTUAL is not set
>
> #
> # Console display driver support
> #
> CONFIG_VGA_CONSOLE=y
> # CONFIG_MDA_CONSOLE is not set
> CONFIG_DUMMY_CONSOLE=y
> CONFIG_FRAMEBUFFER_CONSOLE=y
> CONFIG_PCI_CONSOLE=y
> # CONFIG_FONTS is not set
> CONFIG_FONT_8x8=y
> CONFIG_FONT_8x16=y
>
> #
> # Logo configuration
> #
> # CONFIG_LOGO is not set
>
> #
> # Sound
> #
> CONFIG_SOUND=m
>
> #
> # Advanced Linux Sound Architecture
> #
> CONFIG_SND=m
> CONFIG_SND_SEQUENCER=m
> CONFIG_SND_SEQ_DUMMY=m
> CONFIG_SND_OSSEMUL=y
> CONFIG_SND_MIXER_OSS=m
> CONFIG_SND_PCM_OSS=m
> CONFIG_SND_SEQUENCER_OSS=y
> CONFIG_SND_RTCTIMER=m
> # CONFIG_SND_VERBOSE_PRINTK is not set
> # CONFIG_SND_DEBUG is not set
>
> #
> # Generic devices
> #
> CONFIG_SND_DUMMY=m
> # CONFIG_SND_VIRMIDI is not set
> # CONFIG_SND_MTPAV is not set
> # CONFIG_SND_SERIAL_U16550 is not set
> # CONFIG_SND_MPU401 is not set
>
> #
> # ISA devices
> #
> # CONFIG_SND_AD1848 is not set
> # CONFIG_SND_CS4231 is not set
> # CONFIG_SND_CS4232 is not set
> # CONFIG_SND_CS4236 is not set
> # CONFIG_SND_ES1688 is not set
> # CONFIG_SND_ES18XX is not set
> # CONFIG_SND_GUSCLASSIC is not set
> # CONFIG_SND_GUSEXTREME is not set
> # CONFIG_SND_GUSMAX is not set
> # CONFIG_SND_INTERWAVE is not set
> # CONFIG_SND_INTERWAVE_STB is not set
> # CONFIG_SND_OPTI92X_AD1848 is not set
> # CONFIG_SND_OPTI92X_CS4231 is not set
> # CONFIG_SND_OPTI93X is not set
> # CONFIG_SND_SB8 is not set
> # CONFIG_SND_SB16 is not set
> # CONFIG_SND_SBAWE is not set
> # CONFIG_SND_WAVEFRONT is not set
> # CONFIG_SND_CMI8330 is not set
> # CONFIG_SND_OPL3SA2 is not set
> # CONFIG_SND_SGALAXY is not set
> # CONFIG_SND_SSCAPE is not set
>
> #
> # PCI devices
> #
> # CONFIG_SND_ALI5451 is not set
> # CONFIG_SND_AZT3328 is not set
> # CONFIG_SND_CS46XX is not set
> # CONFIG_SND_CS4281 is not set
> # CONFIG_SND_EMU10K1 is not set
> # CONFIG_SND_KORG1212 is not set
> # CONFIG_SND_NM256 is not set
> # CONFIG_SND_RME32 is not set
> # CONFIG_SND_RME96 is not set
> # CONFIG_SND_RME9652 is not set
> # CONFIG_SND_HDSP is not set
> # CONFIG_SND_TRIDENT is not set
> # CONFIG_SND_YMFPCI is not set
> # CONFIG_SND_ALS4000 is not set
> # CONFIG_SND_CMIPCI is not set
> # CONFIG_SND_ENS1370 is not set
> # CONFIG_SND_ENS1371 is not set
> # CONFIG_SND_ES1938 is not set
> # CONFIG_SND_ES1968 is not set
> # CONFIG_SND_MAESTRO3 is not set
> # CONFIG_SND_FM801 is not set
> # CONFIG_SND_ICE1712 is not set
> # CONFIG_SND_ICE1724 is not set
> CONFIG_SND_INTEL8X0=m
> # CONFIG_SND_SONICVIBES is not set
> # CONFIG_SND_VIA82XX is not set
> # CONFIG_SND_VX222 is not set
>
> #
> # ALSA USB devices
> #
> # CONFIG_SND_USB_AUDIO is not set
>
> #
> # PCMCIA devices
> #
> # CONFIG_SND_VXPOCKET is not set
> # CONFIG_SND_VXP440 is not set
>
> #
> # Open Sound System
> #
> # CONFIG_SOUND_PRIME is not set
>
> #
> # USB support
> #
> CONFIG_USB=m
> # CONFIG_USB_DEBUG is not set
>
> #
> # Miscellaneous USB options
> #
> CONFIG_USB_DEVICEFS=y
> CONFIG_USB_BANDWIDTH=y
> # CONFIG_USB_DYNAMIC_MINORS is not set
>
> #
> # USB Host Controller Drivers
> #
> CONFIG_USB_EHCI_HCD=m
> # CONFIG_USB_OHCI_HCD is not set
> CONFIG_USB_UHCI_HCD=m
>
> #
> # USB Device Class drivers
> #
> CONFIG_USB_AUDIO=m
> # CONFIG_USB_BLUETOOTH_TTY is not set
> CONFIG_USB_MIDI=m
> # CONFIG_USB_ACM is not set
> CONFIG_USB_PRINTER=m
> CONFIG_USB_STORAGE=m
> # CONFIG_USB_STORAGE_DEBUG is not set
> CONFIG_USB_STORAGE_DATAFAB=y
> CONFIG_USB_STORAGE_FREECOM=y
> CONFIG_USB_STORAGE_ISD200=y
> CONFIG_USB_STORAGE_DPCM=y
> CONFIG_USB_STORAGE_HP8200e=y
> CONFIG_USB_STORAGE_SDDR09=y
> CONFIG_USB_STORAGE_SDDR55=y
> CONFIG_USB_STORAGE_JUMPSHOT=y
>
> #
> # USB Human Interface Devices (HID)
> #
> CONFIG_USB_HID=m
> CONFIG_USB_HIDINPUT=y
> # CONFIG_HID_FF is not set
> CONFIG_USB_HIDDEV=y
>
> #
> # USB HID Boot Protocol drivers
> #
> CONFIG_USB_KBD=m
> CONFIG_USB_MOUSE=m
> # CONFIG_USB_AIPTEK is not set
> # CONFIG_USB_WACOM is not set
> # CONFIG_USB_KBTAB is not set
> # CONFIG_USB_POWERMATE is not set
> # CONFIG_USB_XPAD is not set
>
> #
> # USB Imaging devices
> #
> # CONFIG_USB_MDC800 is not set
> # CONFIG_USB_SCANNER is not set
> # CONFIG_USB_MICROTEK is not set
> # CONFIG_USB_HPUSBSCSI is not set
>
> #
> # USB Multimedia devices
> #
> # CONFIG_USB_DABUSB is not set
>
> #
> # Video4Linux support is needed for USB Multimedia device support
> #
>
> #
> # USB Network adaptors
> #
> # CONFIG_USB_CATC is not set
> # CONFIG_USB_KAWETH is not set
> # CONFIG_USB_PEGASUS is not set
> # CONFIG_USB_RTL8150 is not set
> CONFIG_USB_USBNET=m
>
> #
> # USB Host-to-Host Cables
> #
> CONFIG_USB_AN2720=y
> CONFIG_USB_BELKIN=y
> CONFIG_USB_GENESYS=y
> CONFIG_USB_NET1080=y
> CONFIG_USB_PL2301=y
>
> #
> # Intelligent USB Devices/Gadgets
> #
> CONFIG_USB_ARMLINUX=y
> CONFIG_USB_EPSON2888=y
> CONFIG_USB_ZAURUS=y
> CONFIG_USB_CDCETHER=y
>
> #
> # USB Network Adapters
> #
> # CONFIG_USB_AX8817X is not set
>
> #
> # USB port drivers
> #
>
> #
> # USB Serial Converter support
> #
> CONFIG_USB_SERIAL=m
> CONFIG_USB_SERIAL_GENERIC=y
> CONFIG_USB_SERIAL_BELKIN=m
> CONFIG_USB_SERIAL_WHITEHEAT=m
> CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
> CONFIG_USB_SERIAL_EMPEG=m
> CONFIG_USB_SERIAL_FTDI_SIO=m
> CONFIG_USB_SERIAL_VISOR=m
> CONFIG_USB_SERIAL_IPAQ=m
> CONFIG_USB_SERIAL_IR=m
> CONFIG_USB_SERIAL_EDGEPORT=m
> CONFIG_USB_SERIAL_EDGEPORT_TI=m
> CONFIG_USB_SERIAL_KEYSPAN_PDA=m
> CONFIG_USB_SERIAL_KEYSPAN=m
> # CONFIG_USB_SERIAL_KEYSPAN_MPR is not set
> # CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
> # CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
> # CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
> # CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
> # CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
> # CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
> # CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
> # CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set
> # CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set
> # CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
> # CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set
> CONFIG_USB_SERIAL_KLSI=m
> # CONFIG_USB_SERIAL_KOBIL_SCT is not set
> CONFIG_USB_SERIAL_MCT_U232=m
> CONFIG_USB_SERIAL_PL2303=m
> # CONFIG_USB_SERIAL_SAFE is not set
> CONFIG_USB_SERIAL_CYBERJACK=m
> CONFIG_USB_SERIAL_XIRCOM=m
> CONFIG_USB_SERIAL_OMNINET=m
> CONFIG_USB_EZUSB=y
>
> #
> # USB Miscellaneous drivers
> #
> # CONFIG_USB_EMI26 is not set
> CONFIG_USB_TIGL=m
> # CONFIG_USB_AUERSWALD is not set
> # CONFIG_USB_RIO500 is not set
> # CONFIG_USB_LEGOTOWER is not set
> # CONFIG_USB_BRLVGER is not set
> # CONFIG_USB_LCD is not set
> # CONFIG_USB_TEST is not set
> # CONFIG_USB_GADGET is not set
>
> #
> # File systems
> #
> CONFIG_EXT2_FS=y
> # CONFIG_EXT2_FS_XATTR is not set
> CONFIG_EXT3_FS=y
> CONFIG_EXT3_FS_XATTR=y
> # CONFIG_EXT3_FS_POSIX_ACL is not set
> # CONFIG_EXT3_FS_SECURITY is not set
> CONFIG_JBD=y
> # CONFIG_JBD_DEBUG is not set
> CONFIG_FS_MBCACHE=y
> # CONFIG_REISERFS_FS is not set
> # CONFIG_JFS_FS is not set
> CONFIG_XFS_FS=y
> # CONFIG_XFS_RT is not set
> # CONFIG_XFS_QUOTA is not set
> CONFIG_XFS_POSIX_ACL=y
> # CONFIG_MINIX_FS is not set
> CONFIG_ROMFS_FS=m
> # CONFIG_QUOTA is not set
> CONFIG_AUTOFS_FS=m
> CONFIG_AUTOFS4_FS=m
>
> #
> # CD-ROM/DVD Filesystems
> #
> CONFIG_ISO9660_FS=y
> CONFIG_JOLIET=y
> CONFIG_ZISOFS=y
> CONFIG_ZISOFS_FS=y
> # CONFIG_UDF_FS is not set
>
> #
> # DOS/FAT/NT Filesystems
> #
> CONFIG_FAT_FS=y
> CONFIG_MSDOS_FS=m
> CONFIG_VFAT_FS=y
> CONFIG_NTFS_FS=m
> # CONFIG_NTFS_DEBUG is not set
> # CONFIG_NTFS_RW is not set
>
> #
> # Pseudo filesystems
> #
> CONFIG_PROC_FS=y
> CONFIG_PROC_KCORE=y
> CONFIG_SYSFS=y
> # CONFIG_DEVFS_FS is not set
> CONFIG_DEVPTS_FS=y
> # CONFIG_DEVPTS_FS_XATTR is not set
> CONFIG_TMPFS=y
> # CONFIG_HUGETLBFS is not set
> # CONFIG_HUGETLB_PAGE is not set
> CONFIG_RAMFS=y
>
> #
> # Miscellaneous filesystems
> #
> # CONFIG_ADFS_FS is not set
> # CONFIG_AFFS_FS is not set
> # CONFIG_HFS_FS is not set
> # CONFIG_BEFS_FS is not set
> # CONFIG_BFS_FS is not set
> # CONFIG_EFS_FS is not set
> CONFIG_CRAMFS=m
> # CONFIG_VXFS_FS is not set
> # CONFIG_HPFS_FS is not set
> # CONFIG_QNX4FS_FS is not set
> # CONFIG_SYSV_FS is not set
> # CONFIG_UFS_FS is not set
>
> #
> # Network File Systems
> #
> CONFIG_NFS_FS=m
> CONFIG_NFS_V3=y
> CONFIG_NFS_V4=y
> # CONFIG_NFS_DIRECTIO is not set
> CONFIG_NFSD=m
> # CONFIG_NFSD_V3 is not set
> # CONFIG_NFSD_TCP is not set
> CONFIG_LOCKD=m
> CONFIG_LOCKD_V4=y
> CONFIG_EXPORTFS=m
> CONFIG_SUNRPC=m
> # CONFIG_SUNRPC_GSS is not set
> CONFIG_SMB_FS=m
> # CONFIG_SMB_NLS_DEFAULT is not set
> # CONFIG_CIFS is not set
> # CONFIG_NCP_FS is not set
> CONFIG_CODA_FS=m
> # CONFIG_CODA_FS_OLD_API is not set
> # CONFIG_INTERMEZZO_FS is not set
> # CONFIG_AFS_FS is not set
>
> #
> # Partition Types
> #
> # CONFIG_PARTITION_ADVANCED is not set
> CONFIG_MSDOS_PARTITION=y
>
> #
> # Native Language Support
> #
> CONFIG_NLS=y
> CONFIG_NLS_DEFAULT="cp437"
> CONFIG_NLS_CODEPAGE_437=m
> CONFIG_NLS_CODEPAGE_737=m
> CONFIG_NLS_CODEPAGE_775=m
> CONFIG_NLS_CODEPAGE_850=m
> CONFIG_NLS_CODEPAGE_852=m
> CONFIG_NLS_CODEPAGE_855=m
> CONFIG_NLS_CODEPAGE_857=m
> CONFIG_NLS_CODEPAGE_860=m
> CONFIG_NLS_CODEPAGE_861=m
> CONFIG_NLS_CODEPAGE_862=m
> CONFIG_NLS_CODEPAGE_863=m
> CONFIG_NLS_CODEPAGE_864=m
> CONFIG_NLS_CODEPAGE_865=m
> CONFIG_NLS_CODEPAGE_866=m
> CONFIG_NLS_CODEPAGE_869=m
> CONFIG_NLS_CODEPAGE_936=m
> CONFIG_NLS_CODEPAGE_950=m
> CONFIG_NLS_CODEPAGE_932=m
> CONFIG_NLS_CODEPAGE_949=m
> CONFIG_NLS_CODEPAGE_874=m
> CONFIG_NLS_ISO8859_8=m
> CONFIG_NLS_CODEPAGE_1250=m
> CONFIG_NLS_CODEPAGE_1251=m
> CONFIG_NLS_ISO8859_1=m
> CONFIG_NLS_ISO8859_2=m
> CONFIG_NLS_ISO8859_3=m
> CONFIG_NLS_ISO8859_4=m
> CONFIG_NLS_ISO8859_5=m
> CONFIG_NLS_ISO8859_6=m
> CONFIG_NLS_ISO8859_7=m
> CONFIG_NLS_ISO8859_9=m
> CONFIG_NLS_ISO8859_13=m
> CONFIG_NLS_ISO8859_14=m
> CONFIG_NLS_ISO8859_15=m
> CONFIG_NLS_KOI8_R=m
> CONFIG_NLS_KOI8_U=m
> CONFIG_NLS_UTF8=m
>
> #
> # Profiling support
> #
> # CONFIG_PROFILING is not set
>
> #
> # Kernel hacking
> #
> # CONFIG_DEBUG_KERNEL is not set
> # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
> # CONFIG_FRAME_POINTER is not set
> CONFIG_X86_EXTRA_IRQS=y
> CONFIG_X86_FIND_SMP_CONFIG=y
> CONFIG_X86_MPPARSE=y
>
> #
> # Security options
> #
> # CONFIG_SECURITY is not set
>
> #
> # Cryptographic options
> #
> # CONFIG_CRYPTO is not set
>
> #
> # Library routines
> #
> CONFIG_CRC32=m
> CONFIG_ZLIB_INFLATE=y
> CONFIG_X86_BIOS_REBOOT=y
> CONFIG_PC=y
>
> Here's what I get when I try to look at my battery stats:
>
> omgterrar:/proc/acpi/battery/BAT0# cat state
> present: yes
> capacity state: ok
> charging state: unknown
> present rate: 0 mA
> remaining capacity: 0 mAh
> present voltage: 0 mV
>
> omgterrar:/proc/acpi/battery/BAT0# cat info
> present: yes
> design capacity: 0 mWh
> last full capacity: 0 mWh
> battery technology: non-rechargeable
> design voltage: 0 mV
> design capacity warning: 0 mWh
> design capacity low: 0 mWh
> capacity granularity 1: 0 mWh
> capacity granularity 2: 0 mWh
> model number:
> serial number:
> battery type:
> OEM info:
>
> Here's the output of the ver_linux script:
>
> Linux omgterrar 2.6.1-mm5 #1 Tue Jan 20 12:25:44 EST 2004 i686 GNU/Linux
>
> Gnu C 3.3.3
> Gnu make 3.80
> util-linux 2.12
> mount 2.12
> module-init-tools 3.0-pre5
> e2fsprogs 1.35-WIP
> xfsprogs 2.6.0
> pcmcia-cs 3.2.5
> PPP 2.4.2
> Linux C Library 2.3.2
> Dynamic linker (ldd) 2.3.2
> Procps 3.1.15
> Net-tools 1.60
> Console-tools 0.2.3
> Sh-utils 5.0.91
> Modules Loaded nvidia ds yenta_socket pcmcia_core 8250
> serial_core snd_seq_oss snd_seq_midi_event snd_seq snd_pcm_oss
> snd_mixer_oss snd_intel8x0 snd_ac97_codec snd_pcm snd_timer
> snd_page_alloc snd_mpu401_uart snd_rawmidi snd_seq_device snd
> soundcore thermal processor fan button battery ac ehci_hcd sd_mod
> usb_storage evdev psmouse cpufreq_userspace ide_cd cdrom usbmouse
> i8k usblp cpuid microcode uhci_hcd usbcore 3c59x
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
--
Charles Bueche <charles@xxxxxxxxx>
sand, snow, wave, wind and net -surfer

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Marcos D. Marado Torres: "Re: mouse configuration in 2.6.1"
Previous message: Andi Kleen: "Re: 2.6.1-mm4"
In reply to: Chris Scheib: "Problem: 2.6.1-mm4/5 ACPI ut_allocate error on Dell Inspiron 8200"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]