Re: BitKeeper repo for KGDB
From: Tom Rini
Date: Fri Feb 06 2004 - 18:05:03 EST
On Fri, Feb 06, 2004 at 11:55:35PM +0100, Pavel Machek wrote:
> Hi!
>
> > > > It's against 2.6 + -netpoll + Amit's patch.
> > >
> > > But doesn't -mm have a kgdb over enet driver that does work? It's just
> > > not been ported to Amit's bits, right?
> >
> > OK. Based on this, and some other fixes, I've pushed my first cut of
> > KGDB over ethernet. It's not quite as robust as I'd like right now (I'm
> > still getting it just-right for connecting live), and I've got some not
> > quite finished improvements still locally, but it does work.
>
> Is there way to get plain diff (against -mm or against Amit or
> something?)
I'll post a diff against -mm next week when I'm a bit happier with it,
but the following is against Amit's version + your patch to port it to
netpoll:
--- a/arch/ppc/kernel/ppc-stub.c Fri Feb 6 16:01:20 2004
+++ b/arch/ppc/kernel/ppc-stub.c Fri Feb 6 16:01:20 2004
@@ -252,9 +252,6 @@
return -1;
}
-/* We can either use this driver, which relies on other hooks, or
- * provide on some boards make use of kgdb_8250 */
-#ifndef CONFIG_KGDB_8250
static void
kgdbppc_write_char(int chr)
{
@@ -275,12 +272,11 @@
return 0;
}
-struct kgdb_serial kgdb_serial_driver = {
+struct kgdb_serial kgdbppc_serial = {
.read_char = kgdbppc_read_char,
.write_char = kgdbppc_write_char,
.hook = kgdbppc_hook
};
-#endif
int
kgdb_arch_init(void)
@@ -291,7 +287,18 @@
debugger_iabr_match = kgdb_iabr_match;
debugger_dabr_match = kgdb_dabr_match;
+ /* If we have the bigger 8250 serial driver, set that to be
+ * the output now. */
+#ifdef CONFIG_KGDB_8250
+ extern struct kgdb_serial kgdb8250_serial_driver;
+ kgdb_serial = &kgdb8250_serial_driver;
+#else
+ /* Take our serial driver. */
+ kgdb_serial = &kgdbppc_serial;
+#endif
+
return 0;
+
}
/*
--- a/drivers/net/Makefile Fri Feb 6 16:01:20 2004
+++ b/drivers/net/Makefile Fri Feb 6 16:01:20 2004
@@ -31,8 +31,6 @@
obj-$(CONFIG_OAKNET) += oaknet.o 8390.o
-obj-$(CONFIG_KGDB_ETH) += kgdb_eth.o
-
obj-$(CONFIG_DGRS) += dgrs.o
obj-$(CONFIG_RCPCI) += rcpci.o
obj-$(CONFIG_VORTEX) += 3c59x.o
@@ -190,4 +188,6 @@
obj-$(CONFIG_HAMRADIO) += hamradio/
obj-$(CONFIG_IRDA) += irda/
+# Netpoll users must be last.
obj-$(CONFIG_NETCONSOLE) += netconsole.o
+obj-$(CONFIG_KGDB_ETH) += kgdb_eth.o
--- a/drivers/net/kgdb_eth.c Fri Feb 6 16:01:20 2004
+++ b/drivers/net/kgdb_eth.c Fri Feb 6 16:01:20 2004
@@ -53,7 +53,7 @@
#include <asm/atomic.h>
#define IN_BUF_SIZE 512 /* power of 2, please */
-#define OUT_BUF_SIZE 256
+#define OUT_BUF_SIZE 30 /* We don't want to send too big of a packet. */
static char in_buf[IN_BUF_SIZE], out_buf[OUT_BUF_SIZE];
static int in_head, in_tail, out_count;
@@ -109,13 +109,11 @@
/* Is this gdb trying to attach? */
if (!netpoll_trap() && len == 8 && !strncmp(msg, "$Hc-1#09", 8))
- printk(KERN_CRIT "Someone is trying to attach\n");
-// kgdb_schedule_breakpoint();
+ breakpoint();
for (i = 0; i < len; i++) {
- if (msg[i] == 3) /* Check for ^C? */
- printk(KERN_CRIT "Someone is trying to ^C?\n");
-// kgdb_schedule_breakpoint();
+ if (msg[i] == 3)
+ breakpoint();
if (atomic_read(&in_count) >= IN_BUF_SIZE) {
/* buffer overflow, clear it */
@@ -136,6 +134,21 @@
__setup("kgdboe=", option_setup);
+static int hook(void)
+{
+ /* Un-initalized, don't go further. */
+ if (kgdboe != 1)
+ return 1;
+ return 0;
+}
+
+struct kgdb_serial kgdbeth_serial = {
+ .read_char = eth_getDebugChar,
+ .write_char = eth_putDebugChar,
+ .hook = hook,
+ .flush = eth_flushDebugChar,
+};
+
static int init_kgdboe(void)
{
#ifdef CONFIG_SMP
@@ -144,29 +157,15 @@
return -1;
}
#endif
-// set_debug_traps();
if(!np.remote_ip || netpoll_setup(&np))
return 1;
+ kgdb_serial = &kgdbeth_serial;
kgdboe = 1;
printk(KERN_INFO "kgdb: debugging over ethernet enabled\n");
return 0;
}
-static int hook(void) { printk("Hook called\n"); return 0; }
-static int begin(void) { printk("Begin called\n"); return 0; }
-static int end(void) { printk("End called\n"); return 0; }
-
module_init(init_kgdboe);
-
-struct kgdb_serial kgdbeth_serial = {
- .chunksize = 1,
- .read_char = eth_getDebugChar,
- .write_char = eth_putDebugChar,
- .hook = hook,
- .flush = eth_flushDebugChar,
- .begin_session = begin,
- .end_session = end,
-};
--- a/drivers/serial/kgdb_8250.c Fri Feb 6 16:01:20 2004
+++ b/drivers/serial/kgdb_8250.c Fri Feb 6 16:01:20 2004
@@ -489,7 +489,7 @@
serial_from_rs_table = 1;
}
-struct kgdb_serial kgdb_serial_driver = {
+struct kgdb_serial kgdb8250_serial_driver = {
.read_char = kgdb8250_read_char,
.write_char = kgdb8250_write_char,
.hook = kgdb8250_hook
--- a/include/linux/kgdb.h Fri Feb 6 16:01:20 2004
+++ b/include/linux/kgdb.h Fri Feb 6 16:01:20 2004
@@ -93,16 +93,13 @@
typedef unsigned char threadref[8];
struct kgdb_serial {
- int chunksize;
int (*read_char)(void);
void (*write_char)(int);
void (*flush)(void);
int (*hook)(void);
- void (*begin_session)(void);
- void (*end_session)(void);
};
-extern struct kgdb_serial kgdb_serial_driver;
+extern struct kgdb_serial *kgdb_serial;
extern struct kgdb_arch arch_kgdb_ops;
extern int kgdb_initialized;
--- a/kernel/kgdbstub.c Fri Feb 6 16:01:20 2004
+++ b/kernel/kgdbstub.c Fri Feb 6 16:01:20 2004
@@ -59,9 +59,22 @@
* The following are the stub functions for code which is arch specific
* and can be omitted on some arches
*/
+
+/*
+ * This function will handle the initalization of any architecture specific
+ * hooks. If there is a suitable early output driver, kgdb_serial
+ * can be pointed at it now.
+ */
int __attribute__ ((weak))
kgdb_arch_init(void)
{
+ /* If we have the default serial driver, set that to be the
+ * output now. */
+#ifdef CONFIG_KGDB_8250
+ extern struct kgdb_serial kgdb8250_serial_driver;
+ kgdb_serial = &kgdb8250_serial_driver;
+#endif
+
return 0;
}
@@ -145,7 +158,7 @@
gdb_breakpoint_t kgdb_break[MAX_BREAKPOINTS];
extern int pid_max;
-struct kgdb_serial *kgdb_serial = &kgdb_serial_driver;
+struct kgdb_serial *kgdb_serial;
int kgdb_initialized = 0;
int kgdb_enter = 0;
@@ -279,12 +292,6 @@
send_count = 0;
while ((ch = buffer[count])) {
- if (kgdb_serial->chunksize &&
- send_count >= kgdb_serial->chunksize) {
- if (kgdb_serial->flush)
- kgdb_serial->flush();
- send_count = 0;
- }
kgdb_serial->write_char(ch);
checksum += ch;
count ++;
@@ -666,10 +673,6 @@
return 0;
}
- /* Grab interface locks first */
- if (kgdb_serial->begin_session)
- kgdb_serial->begin_session();
-
/*
* Interrupts will be restored by the 'trap return' code, except when
* single stepping.
@@ -1089,10 +1092,6 @@
atomic_set(&debugger_active, 0);
local_irq_restore(flags);
- /* Release interface locks */
- if (kgdb_serial->end_session)
- kgdb_serial->end_session();
-
return ret;
}
@@ -1151,13 +1150,16 @@
void breakpoint(void)
{
- if (kgdb_initialized) {
- atomic_set(&kgdb_setting_breakpoint, 1);
- wmb();
- BREAKPOINT();
- wmb();
- atomic_set(&kgdb_setting_breakpoint, 0);
+ if (!kgdb_initialized) {
+ printk("calling set_debug_traps\n");
+ set_debug_traps();
}
+
+ atomic_set(&kgdb_setting_breakpoint, 1);
+ wmb();
+ BREAKPOINT();
+ wmb();
+ atomic_set(&kgdb_setting_breakpoint, 0);
}
void kgdb_nmihook(int cpu, void *regs)
@@ -1179,7 +1181,8 @@
return;
}
- /* Let the arch do any initalization it needs to */
+ /* Let the arch do any initalization it needs to, including
+ * pointing to a suitable early output device. */
kgdb_arch_init();
if (!kgdb_serial) {
@@ -1199,11 +1202,11 @@
/*
* Call the breakpoint() routine in GDB to start the debugging
- * session.
+ * session
*/
printk(KERN_CRIT "Waiting for connection from remote gdb... ");
breakpoint() ;
- printk(KERN_CRIT "Connected.\n");
+ printk("Connected.\n");
}
#ifdef CONFIG_KGDB_CONSOLE
--
Tom Rini
http://gate.crashing.org/~trini/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/