IO-APIC + timer

From: Josef Möllers
Date: Thu Feb 19 2004 - 09:51:50 EST


Hello Ingo,

Can you help? I've tried reaching bugzilla.redhat.com, but didn't
connect.

We have a problem with a IO-APIC + timer on a RedHat Linux 2.4.21
kernel:

ESR value after enabling vector: 00000000
Calibrating delay loop... 6107.95 BogoMIPS
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Hyper-Threading is disabled
Intel machine check reporting enabled on CPU#1.
CPU1: Intel(R) Xeon(TM) CPU 3.06GHz stepping 09
Total of 2 processors activated (6945.17 BogoMIPS).
ENABLING IO-APIC IRQs
Setting 7 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 7 ... ok.
Setting 8 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 8 ... ok.
Setting 9 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 9 ... ok.
..TIMER: vector=0x31 pin1=2 pin2=0
..MP-BIOS bug: 8254 timer not connected to IO-APIC
...trying to set up timer (IRQ0) through the 8259A ...
..... (found pin 0) ... failed.
timer doesn't work through the IO-APIC - disabling NMI Watchdog!
...trying to set up timer as Virtual Wire IRQ... failed.
...trying to set up timer as ExtINT IRQ... failed :(.
Kernel panic: IO-APIC + timer doesn't work! pester mingo@xxxxxxxxxx
In idle task - not syncing

The hardware is

Northbridge: Intel E7505 Chipset, Plumas
Southbridge: Intel ICH3S
Super-I/O: NS PC87366/VLA
FWH: SST 49LF004A
Giga-LAN: Intel 82546EB
SCSI: Adaptec 7902
Processors: 2 X Prestonia processors, 533 MHz FSB, 2.8
GHz -
3.2 GHz
Memory: 1 - 6 registered DIMMs, PC2100R, DDR 266
Video: ATI Rage XL

Thanks in advance,

Josef
--
Josef Möllers (Pinguinpfleger bei FSC)
If failure had no penalty success would not be a prize
-- T. Pratchett
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/