Re: e1000 (on-board CSA) lockup with 2.6.3 on ifconfig

[Rene H. Larsen]

tor, 2004-02-19 kl. 12:38 skrev Alex Scheele:
> Hi,
> 
> The lockup is probably caused by a patch that made it in the tree 
> which adds an interrupt disable/enable to keep interrupt assertion 
> state synced between 82547 and APIC. This patch was in the tree before 
> but was reverted a while back because it locked up 82547 CSA-based LOMs. 
> Apparently it made it back in. Below I have inserted a patch (against 2.6.3)
> which removes it again. Feel free to test if it stops the lockups.

It works like a charm.  My box now boots with kernel 2.6.3.

Thanks a lot!

> Regards,
> 
> Alex Scheele

[patch snipped]

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/