Re: Promise TX2plus PATA port?

[Boszormenyi Zoltan]

Boszormenyi Zoltan írta:
> Hi,
>
> how can I make it work? The BIOS recognizes the drive
> (jumpered as master) but 2.6.3-mm2 does not. Device id is 0x3373.
> pdc202xx_new, pdc202xx_old and sata_promise drivers
> are compiled in. Motherboard is an MSI K8T Neo FIS2R.
> The 120GB Samsung and the Sony CRX300E DVD/CDRW combo
> are recognized by both the BIOS and the kernel.

Needless to say that those devices are attached to the VIA
IDE ports, that works OK. BTW all PATA and SATA host drivers
are compiled in. The Promise SATA378 TX2plus PATA port still
does not work.

--
Best regards,
Zoltán Böszörményi

---------------------
What did Hussein say about his knife?
One in Bush worth two in the hand.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/