Re: Promise SATA driver

[Jeff Garzik]

Pekka Pietikainen wrote:
> On Tue, Feb 24, 2004 at 10:21:23AM -0500, Jeff Garzik wrote:
>
> > Andrew Walrond wrote:
> >
> > > I've got a 378 s150 tx chipset with their fasttrak raid bios. How should I 
> > > configure the drives to use with the 2.6.3 kernel promise SATA driver? Can 
> > > I configure them as a raid array?
> >
> > The 2.6.3 sata_promise driver ignores any RAID configuration you set up, 
> > and directly talks to the drives.
>
> To boot off one you might have to setup a RAID configuration in the
> card BIOS though (Which is why I have a single drive configured as a raid0 :-) )


Hum, the BIOS works fine here with no arrays defined...

	Jeff



-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/