tulip (pnic) errors in 2.6.5-rc1

[Mikael Pettersson]

2.6.5-rc1 causes my Netgear FA310TX to
fill the kernel log with messages like:

eth1: In tulip_rx(), entry 57 004c0728.
eth1: interrupt  csr5=0x02670050 new csr5=0x02660010.
eth1: exiting interrupt, csr5=0x2660010.
 In tulip_rx(), entry 58 004c0728.
eth1: In tulip_rx(), entry 58 004c0728.
eth1: interrupt  csr5=0x02670050 new csr5=0x02660010.
eth1: exiting interrupt, csr5=0x2660010.
 In tulip_rx(), entry 59 006a0300.
eth1: In tulip_rx(), entry 59 006a0300.
eth1: interrupt  csr5=0x02670050 new csr5=0x02660010.
eth1: exiting interrupt, csr5=0x2660010.
eth1: interrupt  csr5=0x02670014 new csr5=0x02660010.
eth1: exiting interrupt, csr5=0x2660010.

and on and on and on ...

No previous kernel had this problem.

2.6.4 identifies the nic as:

PCI: Found IRQ 10 for device 0000:00:0b.0
tulip1:  MII transceiver #1 config 3000 status 7829 advertising 01e1.
eth1: Lite-On 82c168 PNIC rev 32 at 0xa000, XX:XX:XX:XX:XX:XX, IRQ 10.
eth1: Setting full-duplex based on MII#1 link partner capability of 41e1.

/Mikael
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/