Serial card

[Janos Makadi]

Hello,

I have a SWEEX i/o CARD, which has two serial, and one paralell ports. 
On the board is a Netmos (Moschip) Nm9835cv. Is it possible to use this 
card with the 2.6 series kernel? I`m searching on the net two days now, 
but didn`t found any information. Using setserial for setup failed.

lspci -v :

00:0b.0 Communication controller: Unknown device 9710:9835 (rev 01)
	Subsystem: LSI Logic / Symbios Logic (formerly NCR): Unknown device 0012
	Flags: medium devsel, IRQ 11
	I/O ports at b400 [disabled] [size=8]
	I/O ports at b000 [disabled] [size=8]
	I/O ports at a800 [disabled] [size=8]
	I/O ports at a400 [disabled] [size=8]
	I/O ports at a000 [disabled] [size=8]
	I/O ports at 9800 [disabled] [size=16]

/proc/pci :

Bus  0, device  11, function  0:
    Communication controller: NetMos Technology 222N-2 I/O Card (2S+1P) 
(rev 1).
      IRQ 11.
      Master Capable.  Latency=32.
      I/O at 0xb400 [0xb407].
      I/O at 0xb000 [0xb007].
      I/O at 0xa800 [0xa807].
      I/O at 0xa400 [0xa407].
      I/O at 0xa000 [0xa007].
      I/O at 0x9800 [0x980f].

Regards,
Janos
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/