Re: 8139too not working in 2.6

[Derek Chen-Becker]

Mirko Caserta wrote:
> Yes, I know, it's a damn cheap eth card and I should get it replaced :)
>
> Besides that, this card works just fine with 2.4.25 while it refuses to  
> work on a recent 2.6 kernel. I tried 2.6.5 and even  
> 2.6.5-rc2-mm2-broken-out with no luck.

Mine works fine in 2.6.5:

eth0: RealTek RTL8139 at 0xca844000, xx:xx:xx:xx:xx:xx, IRQ 5
eth0:  Identified 8139 chip type 'RTL-8139C'
eth1: RealTek RTL8139 at 0xca895000, xx:xx:xx:xx:xx:xx, IRQ 3
eth1:  Identified 8139 chip type 'RTL-8139C'
eth0: link up, 10Mbps, half-duplex, lpa 0x0000
eth1: link up, 100Mbps, full-duplex, lpa 0x45E1

lspci:

00:03.0 Ethernet controller: D-Link System Inc RTL8139 Ethernet (rev 10)
00:04.0 Ethernet controller: D-Link System Inc RTL8139 Ethernet (rev 10)

Derek


--
+---------------------------------------------------------------+
| Derek Chen-Becker                                             |
| derek@xxxxxxxxxxxxxxx                                         |
| http://chen-becker.org                                        |
|                                                               |
| PGP key available on request or from public key servers       |
| ID: 21A7FB53                                                  |
| Fngrprnt: 209A 77CA A4F9 E716 E20C  6348 B657 77EC 21A7 FB53  |
+---------------------------------------------------------------+
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/