RAID5 (along with RAID1) locks up
From: celestar
Date: Mon May 10 2004 - 04:59:19 EST
Hello everyone,
I'm having a somewhat large problem with using software RAID, which
occurred in multiple 2.6 kernels I tried (2.6.3, 2.6.4, 2.6.5). I have
three identical disks in the box (all SATA) and have a RAID1 (3 disks)
as root file system, which works flawlessly and I'm trying to set up a
RAID5 over all three disks for some data. When the array is initialized
(during creating or during boot), the machine locks up within 30-60
seconds. no SysRq key combinations work, and NMI watchdog interrupts
are created any more.
Is this a known problem, or am I messing something up? As I'm not sure
that this is solely a RAID problem, I have sent it to linux-kernel as
well.
As I'm only subscribed to linux-raid, I'd be great if all responses to
go there ;)
Thanks in advance for your time,
Victor
System Information:
1. Hardware
???????????????????????????????????????????????????????????????????????????????
1.1 procinfo - /usr/bin/procinfo
Linux 2.6.4-54.3-smp (geeko@buildhost) (gcc 3.3.3 ) #1 2CPU
[flmdyna10]
Memory: Total Used Free Shared Buffers
Mem: 1035240 110996 924244 0 18284
Swap: 1590408 0 1590408
Bootup: Fri May 7 06:01:30 2004 Load average: 0.72 0.27 0.09 1/69
3016
user : 0:00:08.05 6.0% page in : 0
nice : 0:00:00.00 0.0% page out: 0
system: 0:00:11.99 8.9% swap in : 0
idle : 0:01:34.33 70.0% swap out: 0
uptime: 0:01:07.34 context : 34180
irq 0: 66021 timer irq 12: 3
irq 1: 319 i8042 irq 15: 30 ide1
irq 2: 0 cascade [4] irq 16: 61 uhci_hcd
irq 6: 12 irq 18: 4156 libata, eth0
irq 8: 2 rtc irq 23: 5307 libata
irq 9: 0 acpi
???????????????????????????????????????????????????????????????????????????????
1.2 CPU - /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 15
model : 2
model name : Intel(R) Pentium(R) 4 CPU 2.80GHz
stepping : 9
cpu MHz : 2799.238
cache size : 512 KB
physical id : 0
siblings : 2
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe cid
bogomips : 5537.79
processor : 1
vendor_id : GenuineIntel
cpu family : 15
model : 2
model name : Intel(R) Pentium(R) 4 CPU 2.80GHz
stepping : 9
cpu MHz : 2799.238
cache size : 512 KB
physical id : 0
siblings : 2
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe cid
bogomips : 5586.94
???????????????????????????????????????????????????????????????????????????????
1.3 cmdline - /proc/cmdline
auto BOOT_IMAGE=Linux ro root=900 resume=/dev/sda2 splash=silent
desktop
???????????????????????????????????????????????????????????????????????????????
1.4 IO-Ports - /proc/ioports
0000-001f : dma1
0020-0021 : pic1
0040-005f : timer
0060-006f : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
0376-0376 : ide1
03c0-03df : vesafb
0400-041f : 0000:00:1f.3
0cf8-0cff : PCI conf1
b000-bfff : PCI Bus #01
b000-b0ff : 0000:01:00.0
c000-cfff : PCI Bus #02
cf80-cf9f : 0000:02:01.0
cf80-cf9f : e1000
dc00-dc7f : 0000:03:04.0
dc00-dc7f : sata_promise
df00-df3f : 0000:03:04.0
df00-df3f : sata_promise
dfa0-dfaf : 0000:03:04.0
dfa0-dfaf : sata_promise
ef00-ef1f : 0000:00:1d.0
ef00-ef1f : uhci_hcd
ef90-ef9f : 0000:00:1f.2
ef90-ef9f : libata
efa0-efa7 : 0000:00:1f.2
efa0-efa7 : libata
efa8-efab : 0000:00:1f.2
efa8-efab : libata
efac-efaf : 0000:00:1f.2
efac-efaf : libata
efe0-efe7 : 0000:00:1f.2
efe0-efe7 : libata
fc00-fc0f : 0000:00:1f.1
fc00-fc07 : ide0
fc08-fc0f : ide1
???????????????????????????????????????????????????????????????????????????????
1.5 DMA - /proc/dma
4: cascade
???????????????????????????????????????????????????????????????????????????????
1.6 devices - /proc/devices
Character devices:
1 mem
2 pty
3 ttyp
4 /dev/vc/0
4 tty
4 ttyS
5 /dev/tty
5 /dev/console
5 /dev/ptmx
6 lp
7 vcs
9 st
10 misc
13 input
29 fb
128 ptm
136 pts
180 usb
188 ttyUSB
Block devices:
1 ramdisk
2 fd
7 loop
8 sd
9 md
11 sr
22 ide1
65 sd
66 sd
67 sd
68 sd
69 sd
70 sd
71 sd
128 sd
129 sd
130 sd
131 sd
132 sd
133 sd
134 sd
135 sd
253 device-mapper
254 mdp
???????????????????????????????????????????????????????????????????????????????
1.7 USB-devices - /proc/bus/usb/devices
file /proc/bus/usb/devices not found
???????????????????????????????????????????????????????????????????????????????
1.8 lsPCI - /sbin/lspci -vvv
0000:00:00.0 Host bridge: Intel Corp. 82875P Memory Controller Hub (rev
02)
Subsystem: Asustek Computer, Inc.: Unknown device 80f6
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Region 0: Memory at f4000000 (32-bit, prefetchable)
Capabilities: [e4] #09 [2106]
Capabilities: [a0] AGP version 3.0
Status: RQ=32 Iso- ArqSz=2 Cal=0 SBA+ ITACoh- GART64-
HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit-
FW- Rate=<none>
0000:00:01.0 PCI bridge: Intel Corp. 82875P Processor to AGP Controller
(rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: fe800000-fe8fffff
Prefetchable memory behind bridge: dff00000-efefffff
Expansion ROM at 0000b000 [disabled] [size=4K]
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
0000:00:03.0 PCI bridge: Intel Corp. 82875P Processor to PCI to CSA
Bridge (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fe900000-fe9fffff
Prefetchable memory behind bridge: fff00000-000fffff
Expansion ROM at 0000c000 [disabled] [size=4K]
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
0000:00:1d.0 USB Controller: Intel Corp. 82801EB USB (rev 02) (prog-if
00 [UHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 80a6
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at ef00 [size=32]
0000:00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB PCI Bridge (rev
c2) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=64
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fea00000-feafffff
Prefetchable memory behind bridge: fff00000-000fffff
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
0000:00:1f.0 ISA bridge: Intel Corp. 82801EB LPC Interface Controller
(rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
0000:00:1f.1 IDE interface: Intel Corp. 82801EB Ultra ATA Storage
Controller (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Asustek Computer, Inc.: Unknown device 80a6
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at <unassigned>
Region 1: I/O ports at <unassigned>
Region 2: I/O ports at <unassigned>
Region 3: I/O ports at <unassigned>
Region 4: I/O ports at fc00 [size=16]
Region 5: Memory at 40000000 (32-bit, non-prefetchable)
[size=1K]
0000:00:1f.2 IDE interface: Intel Corp. 82801EB Ultra ATA Storage
Controller (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Asustek Computer, Inc.: Unknown device 80a6
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at efe0
Region 1: I/O ports at efac [size=4]
Region 2: I/O ports at efa0 [size=8]
Region 3: I/O ports at efa8 [size=4]
Region 4: I/O ports at ef90 [size=16]
0000:00:1f.3 SMBus: Intel Corp. 82801EB SMBus Controller (rev 02)
Subsystem: Asustek Computer, Inc.: Unknown device 80a6
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 0400 [size=32]
0000:01:00.0 VGA compatible controller: ATI Technologies Inc Radeon
RV100 QY [Radeon 7000/VE] (prog-if 00 [VGA])
Subsystem: PC Partner Limited: Unknown device 7c28
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping+ SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (2000ns min), cache line size 04
Interrupt: pin A routed to IRQ 16
Region 0: Memory at e0000000 (32-bit, prefetchable)
[size=fe8c0000]
Region 1: I/O ports at b000 [size=256]
Region 2: Memory at fe8f0000 (32-bit, non-prefetchable)
[size=64K]
Expansion ROM at 00020000 [disabled]
Capabilities: [58] AGP version 2.0
Status: RQ=48 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64-
HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP- GART64- 64bit-
FW- Rate=<none>
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:02:01.0 Ethernet controller: Intel Corp. 82547EI Gigabit Ethernet
Controller (LOM)
Subsystem: Asustek Computer, Inc.: Unknown device 80f7
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (63750ns min), cache line size 04
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fe9e0000 (32-bit, non-prefetchable)
Region 2: I/O ports at cf80 [size=32]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
0000:03:04.0 RAID bus controller: Promise Technology, Inc.: Unknown
device 3373 (rev 02)
Subsystem: Asustek Computer, Inc.: Unknown device 80f5
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 96 (1000ns min, 4500ns max), cache line size 91
Interrupt: pin A routed to IRQ 23
Region 0: I/O ports at df00
Region 1: I/O ports at dfa0 [size=16]
Region 2: I/O ports at dc00 [size=128]
Region 3: Memory at feafe000 (32-bit, non-prefetchable)
[size=4K]
Region 4: Memory at feac0000 (32-bit, non-prefetchable)
[size=128K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
lspci - /sbin/lspci -n
0000:00:00.0 Class 0600: 8086:2578 (rev 02)
0000:00:01.0 Class 0604: 8086:2579 (rev 02)
0000:00:03.0 Class 0604: 8086:257b (rev 02)
0000:00:1d.0 Class 0c03: 8086:24d2 (rev 02)
0000:00:1e.0 Class 0604: 8086:244e (rev c2)
0000:00:1f.0 Class 0601: 8086:24d0 (rev 02)
0000:00:1f.1 Class 0101: 8086:24db (rev 02)
0000:00:1f.2 Class 0101: 8086:24d1 (rev 02)
0000:00:1f.3 Class 0c05: 8086:24d3 (rev 02)
0000:01:00.0 Class 0300: 1002:5159
0000:02:01.0 Class 0200: 8086:1019
0000:03:04.0 Class 0104: 105a:3373 (rev 02)
1.11 Hardisk
???????????????????????????????????????????????????????????????????????????????
1.11 partitions - /sbin/fdisk -l
Disk /dev/sda: 251.0 GB, 251000193024 bytes
255 heads, 63 sectors/track, 30515 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 1 1959 15735636 fd Linux raid
autodetect
/dev/sda2 1960 2025 530145 82 Linux swap
Disk /dev/sdb: 251.0 GB, 251000193024 bytes
255 heads, 63 sectors/track, 30515 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdb1 1 1959 15735636 fd Linux raid
autodetect
/dev/sdb2 1960 2025 530145 82 Linux swap
Disk /dev/sdc: 251.0 GB, 251000193024 bytes
255 heads, 63 sectors/track, 30515 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdc1 1 1959 15735636 fd Linux raid
autodetect
/dev/sdc2 1960 2025 530145 82 Linux swap
???????????????????????????????????????????????????????????????????????????????
1.12 Mountpoints - /bin/mount
/dev/md0 on / type reiserfs (rw,acl,user_xattr)
proc on /proc type proc (rw)
tmpfs on /dev/shm type tmpfs (rw)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
/dev/hdc on /media/dvd type subfs
(ro,nosuid,nodev,fs=cdfss,procuid,iocharset=utf8)
/dev/fd0 on /media/floppy type subfs
(rw,nosuid,nodev,sync,fs=floppyfss,procuid)
usbfs on /proc/bus/usb type usbfs (rw)
automount(pid2297) on /home type autofs
(rw,fd=5,pgrp=2297,minproto=2,maxproto=3)
automount(pid2301) on /net type autofs
(rw,fd=5,pgrp=2301,minproto=2,maxproto=3)
automount(pid2299) on /ptmp type autofs
(rw,fd=5,pgrp=2299,minproto=2,maxproto=3)
???????????????????????????????????????????????????????????????????????????????
1.13 fstab - /etc/fstab
/dev/md0 / reiserfs acl,user_xattr
1 1
/dev/sda2 swap swap pri=42
0 0
/dev/sdb2 swap swap pri=42
0 0
/dev/sdc2 swap swap pri=42
0 0
devpts /dev/pts devpts mode=0620,gid=5
0 0
proc /proc proc defaults
0 0
usbfs /proc/bus/usb usbfs noauto
0 0
sysfs /sys sysfs noauto
0 0
/dev/dvd /media/dvd subfs
fs=cdfss,ro,procuid,nosuid,nodev,exec,iocharset=utf8 0 0
/dev/fd0 /media/floppy subfs
fs=floppyfss,procuid,nodev,nosuid,sync 0 0
???????????????????????????????????????????????????????????????????????????????
1.14 Settings
name value min max
mode
---- ----- --- ---
----
current_speed 0 0 70
rw
dsc_overlap 0 0 1
rw
ide-scsi 0 0 1
rw
init_speed 0 0 70
rw
io_32bit 0 0 3
rw
keepsettings 0 0 1
rw
nice1 1 0 1
rw
number 2 0 3
rw
pio_mode write-only 0 255
w
unmaskirq 0 0 1
rw
using_dma 0 0 1
rw
???????????????????????????????????????????????????????????????????????????????
1.16 scsi - /usr/sbin/hwinfo --scsi
14: SCSI 100.0: 10600 Disk
[Created at block.190]
Unique ID: _q_W.qQBd_Nltq75
Parent ID: w7Y8.h+1RGPD0E57
SysFS ID: /block/sda
SysFS BusID: 1:0:0:0
SysFS Device Link: /devices/pci0000:00/0000:00:1f.2/host1/1:0:0:0
Hardware Class: disk
Model: "ATA Maxtor 7Y250M0"
Vendor: "ATA"
Device: "Maxtor 7Y250M0"
Revision: "1.02"
Serial ID: "Y62BSWNE"
Driver: "ata_piix", "sd"
Device File: /dev/sda
Device Number: block 8:0-8:15
Geometry (Logical): CHS 30515/255/63
Size: 490234752 sectors a 512 bytes
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #8 (IDE interface)
15: SCSI 200.0: 10600 Disk
[Created at block.190]
Unique ID: R0Fb.iHV+UMtQHFC
Parent ID: AMUB.Riy0go04uj1
SysFS ID: /block/sdb
SysFS BusID: 2:0:0:0
SysFS Device Link:
/devices/pci0000:00/0000:00:1e.0/0000:03:04.0/host2/2:0:0:0
Hardware Class: disk
Model: "ATA Maxtor 7Y250M0"
Vendor: "ATA"
Device: "Maxtor 7Y250M0"
Revision: "1.02"
Serial ID: "Y62BAYFE"
Driver: "sata_promise", "sd"
Device File: /dev/sdb
Device Number: block 8:16-8:31
Geometry (Logical): CHS 30515/255/63
Size: 490234752 sectors a 512 bytes
Config Status: cfg=yes, avail=yes, need=no, active=unknown
Attached to: #12 (RAID bus controller)
16: SCSI 300.0: 10600 Disk
[Created at block.190]
Unique ID: uBVf.0SX1qJ8tfr7
Parent ID: AMUB.Riy0go04uj1
SysFS ID: /block/sdc
SysFS BusID: 3:0:0:0
SysFS Device Link:
/devices/pci0000:00/0000:00:1e.0/0000:03:04.0/host3/3:0:0:0
Hardware Class: disk
Model: "ATA Maxtor 7Y250M0"
Vendor: "ATA"
Device: "Maxtor 7Y250M0"
Revision: "1.02"
Serial ID: "Y62BT08E"
Driver: "sata_promise", "sd"
Device File: /dev/sdc
Device Number: block 8:32-8:47
Geometry (Logical): CHS 30515/255/63
Size: 490234752 sectors a 512 bytes
Config Status: cfg=yes, avail=yes, need=no, active=unknown
Attached to: #12 (RAID bus controller)
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/