Re: Sound with noise since 2.6.5

[Martin Schlemmer]

On Wed, 2004-05-12 at 15:18, Takashi Iwai wrote:
> At Tue, 11 May 2004 14:45:40 -0400,
> Adrian Almenar wrote:
> > 
> > [1  <text/plain; US-ASCII (7bit)>]
> > Hi,
> > 
> > Since i installed 2.6.5 i cant get sound to work ok, i always have noise like a tv without a signal but the sound its there but with that noise.
> > I tried with 2.6.6 but its the same, 2.6.4 doesnt have this problem.
> > 
> > Module: intel8x0
> > 
> > lspci -v reports:
> > 0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801BA/BAM AC'97 Audio (rev 12)
> >         Subsystem: GVC/BCM Advanced Research: Unknown device 2147
> >         Flags: bus master, medium devsel, latency 0, IRQ 17
> >         I/O ports at ec00
> >         I/O ports at e800 [size=64]
> > 
> > 
> > dmesg says:
> > May 11 12:37:52 er-murazor kernel: intel8x0_measure_ac97_clock: measured 49263 usecs
> > May 11 12:37:52 er-murazor kernel: intel8x0: clocking to 48000
> > 
> > 
> > Im attaching my .config
> > 
> > Also i have alsa-lib 1.0.4.
> > 
> > Anything else you need please ask me i will gladly help on this issue.
> 
> which ac97 codec chip?
> 
> a typical problem is 'IEC958 Input Monitor' is turned on.
> if you have such one, turn it off.
> 
> 

Hi

Pretty much the same issue.  I have much the same setup software side,
but its a Asus P4C800-E with a SoundMax AD1985 chip.  If more is needed,
let me know.


Thanks,

-- 
Martin Schlemmer

Attachment: signature.asc
Description: This is a digitally signed message part