Re: 2.6-BK usb (printing) broken

[Greg KH]

On Sat, May 29, 2004 at 04:08:00PM +0200, Jens Axboe wrote:
> 
> Something between 2.6.7-rc1 and current 2.6-BK broke usb printing here
> again. I have two printers attached:
> 
> usb 1-1: new full speed USB device using address 6
> usb 1-1: control timeout on ep0out
> usb 1-1: control timeout on ep0out
> usb 1-1: device not accepting address 6, error -110
> usb 1-1: new full speed USB device using address 7
> usb 1-1: control timeout on ep0out
> usb 1-1: control timeout on ep0out
> usb 1-1: device not accepting address 7, error -110
> 
> It's a VIA EPIA-800 board, lspci shows the following for usb:
> 
> 00:11.2 USB Controller: VIA Technologies, Inc. USB (rev 24)
> 00:11.3 USB Controller: VIA Technologies, Inc. USB (rev 24)

Alan, looks like your "fix the VIA controller driver" patch broke
something here, care to look into it?

thanks,

greg k-h
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/