Re: [OT] Who has record no. of DriveReady SeekComplete DataRequest errors?
From: Con Kolivas
Date: Sun Jun 06 2004 - 18:08:19 EST
On Mon, 7 Jun 2004 06:39, Jens Axboe wrote:
> I could easily imagine some vendors not setting the field, but setting
> it to some "buggy" value is far less likely. But might as well add the
> check.
>
> Con later confirmed that it was 2.6.2 that introduced the breakage, so
> the patch isn't the culprit after all. There are a few seperate things
> to look at there - Con, what are you doing when these messages trigger?
> Is the drive permanently mounted, or does it happen on open?
It only happens on boot and never again. During this part:
ICH4: IDE controller at PCI slot 0000:00:1f.1
ICH4: chipset revision 2
ICH4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
hda: ST340014A, ATA DISK drive
hdb: ST340014A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: JLMS XJ-HD165H, ATAPI CD/DVD-ROM drive
hdd: RICOH CD-R/RW MP7163A, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 1024KiB
hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
hda: hda1 hda2 < hda5 hda6 hda7 >
hdb: max request size: 1024KiB
hdb: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
hdb: hdb2 < hdb5 hdb6 hdb7 >
hdc: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdd: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdd: status error: error=0x20LastFailedSense 0x02
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: status error: error=0x00
..etc
I'll try that other patch when I get a chance later today.
Con
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/