Re: [Linux-usb-users] Genesys Logic and Kernel 2.4

[Hisaaki Shibata]

Hi Alan,

I have just subscribed Linux-usb-users tonight.

I found your message
> Re: [Linux-usb-users] Genesys Logic and Kernel 2.4
on the web.

> > I have a USB-IDE-Enclosure using the buggy Genesys chipset. My system
> > has a 2.4 kernel and I cannot update soon for various reasons.

I maybe have almost the same enclosure using Genesys chip.

> I backported the 2.6 patch to 2.4.27, but I haven't tried compiling it so 
> there might be an error or two lurking.  Please try it out and tell us 
> if it works.

I tried following patch with a little change.

> --- 2.4.27/drivers/usb/storage/transport.c	Fri Jul  9 10:56:27 2004
> +++ 2.4.27-gl/drivers/usb/storage/transport.c	Fri Jul  9 11:51:14 2004
> @@ -1170,6 +1170,12 @@
>  
>  	/* if the command transfered well, then we go to the data stage */
>  	if (result == 0) {
> +
> +		/* Genesys Logic interface chips need a 100us delay between
> +		 * the command phase and the data phase */
> +		if (us->pusb_dev->descriptor.idVendor == USB_VENDOR_ID_GENESYS)
> +			udelay(100);
> +
>  		/* send/receive data payload, if there is any */
>  		if (bcb->DataTransferLength) {
>  			usb_stor_transfer(srb, us);
> --- 2.4.27/drivers/usb/storage/usb.c	Fri Jul  9 11:44:53 2004
> +++ 2.4.27-gl/drivers/usb/storage/usb.c	Fri Jul  9 11:49:44 2004
> @@ -996,6 +996,15 @@
>  		 */
>  		(struct us_data *)ss->htmplt.proc_dir = ss; 
>  
> +		/* According to the technical support people at Genesys Logic,
> +		 * devices using their chips have problems transferring more
> +		 * than 32 KB at a time.  In practice people have found that
> +		 * 64 KB works okay and that's what Windows does.  But we'll
> +		 * be conservative.
> +		 */
> +		if (ss->pusb_dev->descriptor.idVendor == USB_VENDOR_ID_GENESYS)
> +			ss->htmplt->max_sectors = 64;

+			ss->htmplt.max_sectors = 64;

> +
>  		/* Just before we start our control thread, initialize
>  		 * the device if it needs initialization */
>  		if (unusual_dev && unusual_dev->initFunction)
> --- 2.4.27/drivers/usb/storage/usb.h	Fri Jul  9 10:56:03 2004
> +++ 2.4.27-gl/drivers/usb/storage/usb.h	Fri Jul  9 11:45:49 2004
> @@ -193,4 +193,7 @@
>  /* Function to fill an inquiry response. See usb.c for details */
>  extern void fill_inquiry_response(struct us_data *us,
>  	unsigned char *data, unsigned int data_len);
> +
> +/* Vendor ID list for devices that require special handling */
> +#define USB_VENDOR_ID_GENESYS		0x05e3	/* Genesys Logic */
>  #endif

Before I patched the kernel, I met many errors and hangups
with big files writing into the enclosure.

After with your patch, It works fine for me.

My kernel is linux-2.4.27-rc3 with video4linux2 patch.
HDD in the enclosure is HGST Deskstar 7K250.

Just a report.

Best Regards,
Hisaaki Shibata

-- 
 WWWWW  shibata@xxxxxxxx
 |O-O|  SHIBATA,Hisaaki @ Fukuoka-shi, JAPAN
0( ^ )0 http://his.luky.org/
   ~    http://hoop.euqset.org/        IRC: #luky
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/