Re: DriveReady SeekComplete Error...
From: Dwayne Rightler
Date: Tue Jul 13 2004 - 10:56:58 EST
The CONFIG_IDEDISK_MULTI_MODE setting makes no difference as seen below:
demigod:~# uname -a
Linux demigod 2.6.7-kexec #2 Tue Jul 13 08:31:56 CDT 2004 i686 GNU/Linux
demigod:~# zgrep CONFIG_IDEDISK_MULTI_MODE /proc/config.gz
CONFIG_IDEDISK_MULTI_MODE=y
demigod:~# dmesg | grep ^hda
hda: SAMSUNG SV2044D, ATA DISK drive
hda: max request size: 128KiB
hda: 39862368 sectors (20409 MB) w/472KiB Cache, CHS=39546/16/63
hda: DMA disabled
hda: dma_timer_expiry: dma status == 0x61
hda: DMA timeout error
hda: dma timeout error: status=0x58 { DriveReady SeekComplete DataRequest }
hda: dma_timer_expiry: dma status == 0x61
hda: DMA timeout error
hda: dma timeout error: status=0x58 { DriveReady SeekComplete DataRequest }
hda: dma_timer_expiry: dma status == 0x61
hda: DMA timeout error
hda: dma timeout error: status=0x58 { DriveReady SeekComplete DataRequest }
hda: DMA disabled
##########################################
demigod:~# uname -a
Linux demigod 2.6.7-kexec #1 Mon Jul 5 11:30:36 CDT 2004 i686 GNU/Linux
demigod:~# zgrep CONFIG_IDEDISK_MULTI_MODE /proc/config.gz
# CONFIG_IDEDISK_MULTI_MODE is not set
demigod:~# dmesg | grep ^hda
hda: SAMSUNG SV2044D, ATA DISK drive
hda: max request size: 128KiB
hda: 39862368 sectors (20409 MB) w/472KiB Cache, CHS=39546/16/63
hda: DMA disabled
hda: dma_timer_expiry: dma status == 0x61
hda: DMA timeout error
hda: dma timeout error: status=0x58 { DriveReady SeekComplete DataRequest }
hda: dma_timer_expiry: dma status == 0x61
hda: DMA timeout error
hda: dma timeout error: status=0x58 { DriveReady SeekComplete DataRequest }
hda: DMA disabled
hda: dma_timer_expiry: dma status == 0x41
hda: DMA timeout error
hda: dma timeout error: status=0x58 { DriveReady SeekComplete DataRequest }
hda: dma_timer_expiry: dma status == 0x61
hda: DMA timeout error
hda: dma timeout error: status=0x58 { DriveReady SeekComplete DataRequest }
----- Original Message -----
From: "Piszcz, Justin Michael" <justin.piszcz@xxxxxxxxxxxx>
To: "Dwayne Rightler" <drightler@xxxxxxxxxxxxxxxxx>;
<linux-kernel@xxxxxxxxxxxxxxx>
Cc: "Dhruv Matani" <dhruvbird@xxxxxxx>
Sent: Tuesday, July 13, 2004 7:44 AM
Subject: RE: DriveReady SeekComplete Error...
> <*> Include IDE/ATA-2 DISK support
> [*] Use multi-mode by default
>
> Have you tried recompiling the kernel and checking off the second option
> show above?
>
> CONFIG_IDEDISK_MULTI_MODE
> If you get this error, try to say Y here:
> hda: set_multmode: status=0x51 { DriveReady SeekComplete Error }
> hda: set_multmode: error=0x04 { DriveStatusError }
> If in doubt, say N.
>
>
> -----Original Message-----
> From: linux-kernel-owner@xxxxxxxxxxxxxxx
> [mailto:linux-kernel-owner@xxxxxxxxxxxxxxx] On Behalf Of Dwayne Rightler
> Sent: Tuesday, July 13, 2004 8:33 AM
> To: linux-kernel@xxxxxxxxxxxxxxx
> Cc: Dhruv Matani
> Subject: Re: DriveReady SeekComplete Error...
>
> I have a similar problem with a Samsung hard drive. Model SV2044D. The
> output of 'hdparm -i' below indicates it supports several multiword and
> ultra DMA modes but if i run the drive in anything other than PIO mode
> it
> gets DMA timeouts and SeekComplete Errors. This has been on every
> kernel I
> can recall in the 2.4 and 2.6 series.
>
> demigod:~# hdparm -i /dev/hda
>
> /dev/hda:
>
> Model=SAMSUNG SV2044D, FwRev=MM200-53, SerialNo=0228J1FN905733
> Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
> RawCHS=16383/16/63, TrkSize=34902, SectSize=554, ECCbytes=4
> BuffType=DualPortCache, BuffSize=472kB, MaxMultSect=16, MultSect=16
> CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=39862368
> IORDY=yes, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
> PIO modes: pio0 pio1 pio2 pio3 pio4
> DMA modes: mdma0 mdma1 mdma2
> UDMA modes: udma0 udma1 udma2 udma3 *udma4
> AdvancedPM=no WriteCache=enabled
> Drive conforms to: ATA/ATAPI-4 T13 1153D revision 17: 1 2 3 4
>
> * signifies the current active mode
>
>
>
> ----- Original Message -----
> From: "Dhruv Matani" <dhruvbird@xxxxxxx>
> To: <linux-kernel@xxxxxxxxxxxxxxx>
> Sent: Tuesday, July 13, 2004 7:30 AM
> Subject: DriveReady SeekComplete Error...
>
>
> > Hi,
> > I've been getting this error for my brand new (2 months old) Samsung
> > HDD. The model Number is: SV0411N, and it is a 40GB disk. I'm using
> the
> > kernel version 2.4.20-8 provided by RedHat. When I used RH-7.2(before
> > upgrading to RH-9), the same HDD worked fine. Also, when I
> re-installed
> > RH-7.2, it worked fine?
> >
> > Any suggestions?
> >
> > Please cc me the reply, sine I'm not subscribed.
> > Thanks ;-)
> >
> > --
> > -Dhruv Matani.
> > http://www.geocities.com/dhruvbird/
> >
> > As a rule, man is a fool. When it's hot, he wants it cold.
> > When it's cold he wants it hot. He always wants what is not.
> > -Anon.
> >
> >
> > -
> > To unsubscribe from this list: send the line "unsubscribe
> linux-kernel" in
> > the body of a message to majordomo@xxxxxxxxxxxxxxx
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
> > Please read the FAQ at http://www.tux.org/lkml/
> >
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel"
> in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/