Re: forcedeth on MSI K8N Neo Platinum

[Carl-Daniel Hailfinger]

Hi Lars,

Lars Hagström schrieb:
> Hi linux-kernel and Carl-Daniel,
> 
> I have just put together a system with a MSI K8N Neo Platinum
> motherboard, and I've been having trouble getting the network up and
> running. The chipset is the NVIDIA nForce 3 250Gb.
> 
> I'm using gentoo, and have compiled kernel 2.6.7 (gentoo-dev-sources, if
> you're familiar with gentoo) with the forcedeth-bk4 and
> forcedeth_gigabig_try19 patches. I have compiled the forcedeth driver as
> a module (It is the 10/100 forcedeth driver that is patched to handle
> 1000, right?).
> When I try to start up the network I get the following messages in my
> syslog:
>   eth0: phy init failed to autoneg
>   eth0: no link during initialization
> (I had the NIC connected to a switch at the time, in case that is what
> is meant by the "no link" bit)
> Is there something simple that I missed, like module parameters, or is
> this a more complicated issue?
> 
> Tonight I will try to enable debugging in the code, to see if I can get
> some more information for you. I would be more than willing to help you
> out with any testing you need.

Could you please try Linux 2.6.8-rc2 without any driver patch? It has the
latest version of forcedeth and I am very interested in any bug reports/
side effects of the update.

Regards,
Carl-Daniel
-- 
http://www.hailfinger.org/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/