Re: 3C905 and ethtool

[Bc. Michal Semler]

Dne po 26. Äervence 2004 15:32 jste napsal(a):
> Hi,
>
> Bc. Michal Semler wrote:
> >I tested it on few machines and it works for me on 8139too devices:
>
> Tested it on two machines:
>
> 3c59x:
> Settings for eth0:
> No data available

Hmm I receive in 3c59x:
# ethtool eth0
Cannot get device settings: Operation not supported

It looks like some kind of double bug?


>
> forcedeth:
> Settings for eth1:
>         Supports Wake-on: g
>         Wake-on: d
>         Link detected: yes
>
> tg3:
> Settings for eth0:
>         Supported ports: [ MII ]
>         Supported link modes:   10baseT/Half 10baseT/Full
>                                 100baseT/Half 100baseT/Full
>                                 1000baseT/Half 1000baseT/Full
>         Supports auto-negotiation: Yes
>         Advertised link modes:  10baseT/Half 10baseT/Full
>                                 100baseT/Half 100baseT/Full
>                                 1000baseT/Half 1000baseT/Full
>         Advertised auto-negotiation: Yes
>         Speed: 100Mb/s
>         Duplex: Full
>         Port: Twisted Pair
>         PHYAD: 1
>         Transceiver: internal
>         Auto-negotiation: on
>         Supports Wake-on: g
>         Wake-on: d
>         Current message level: 0x000000ff (255)
>         Link detected: yes
>
> 8139too:
> Settings for eth0:
>         Supported ports: [ TP MII ]
>         Supported link modes:   10baseT/Half 10baseT/Full
>                                 100baseT/Half 100baseT/Full
>         Supports auto-negotiation: Yes
>         Advertised link modes:  10baseT/Half 10baseT/Full
>                                 100baseT/Half 100baseT/Full
>         Advertised auto-negotiation: Yes
>         Speed: 100Mb/s
>         Duplex: Full
>         Port: MII
>         PHYAD: 32
>         Transceiver: internal
>         Auto-negotiation: on
>         Supports Wake-on: pumbg
>         Wake-on: d
>         Current message level: 0x00000007 (7)
>         Link detected: yes
>
> Lenar
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/