Re: EDD Support

From: Henry Molina
Date: Mon Aug 09 2004 - 15:23:20 EST

Next message: Vladislav Bolkhovitin: "Re: [PATCH] x86 bitops.h commentary on instruction reordering"
Previous message: brking: "[PATCH 3/3] blk_queue_tags_resize_failure"
In reply to: Henry Molina: "Re: EDD Support"
Next in thread: Randy.Dunlap: "Re: EDD Support"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Ok Patrick, but /sys/firmware is not created.

I using now module-init-tools 3.00-pre10

modprobe -v -s edd
insmod /lib/modules/2.6.5-1.358/kernel/drivers/firmware/edd.ko

and /proc/kmsg shows:
<6>BIOS EDD facility v0.15 2004-May-17, 1 devices found

On Mon, 2004-08-09 at 12:44, Henry Molina wrote:
> No Randy, no messages, I'm using insmod from BusyBox v1.00-pre10, and
> lsmod shows the module ok.
>
> On Mon, 2004-08-09 at 11:35, Randy.Dunlap wrote:
> > On Mon, 09 Aug 2004 11:43:31 -0500 Henry Molina wrote:
> >
> > | Hi everyone,
> >
> > Hi Henry,
> >
> > | I'm compiling kernel 2.6.7 with CONFIG_EDD fine, then I proceed to
> > | install the module but I can't get the /proc/sys/firmware/edd entry.
> > |
> > | Any Suggestion?.
> >
> > Any kernel log messages when you load the module?
> > Hint: there should be.
> >
> > | Many Thanks,
> > |
> > | Henry Molina
> > |
> > | PD: I attach the dmidecode output
> > |
> > | # dmidecode 2.2
> > | SMBIOS 2.3 present.
> > | 31 structures occupying 1017 bytes.
> > | Table at 0x000F0630.
> > | Handle 0x0000
> > | DMI type 0, 20 bytes.
> > | BIOS Information
> > | Vendor: American Megatrends Inc.
> > | Version: 1.02
> > | Release Date: 05/09/2003
> > | Address: 0xF0000
> > | Runtime Size: 64 kB
> > | ROM Size: 512 kB
> > | Characteristics:
> > | ISA is supported
> > | PCI is supported
> > | PNP is supported
> > | APM is supported
> > | BIOS is upgradeable
> > | BIOS shadowing is allowed
> > | ESCD support is available
> > | Boot from CD is supported
> > | Selectable boot is supported
> > | BIOS ROM is socketed
> > | EDD is supported
> > | 5.25"/360 KB floppy services are supported (int 13h)
> > | 5.25"/1.2 MB floppy services are supported (int 13h)
> > | 3.5"/720 KB floppy services are supported (int 13h)
> > | 3.5"/2.88 MB floppy services are supported (int 13h)
> > | Print screen service is supported (int 5h)
> > | 8042 keyboard services are supported (int 9h)
> > | Printer services are supported (int 17h)
> > | CGA/mono video services are supported (int 10h)
> > | ACPI is supported
> > | USB legacy is supported
> > | AGP is supported
> > | LS-120 boot is supported
> > | ATAPI Zip drive boot is supported
> > | BIOS boot specification is supported
> > | Handle 0x0001
> > | DMI type 1, 25 bytes.
> > | System Information
> > | Manufacturer: Hewlett-Packard
> > | Product Name: HP d220 MT (DC526A)
> > | Version:
> > | Serial Number: MXD33701GQ
> > | UUID: 15F4C490-59EA-D711-851C-517B4801761B
> > | Wake-up Type: Power Switch
> > | Handle 0x0002
> > | DMI type 2, 8 bytes.
> > | Base Board Information
> > | Manufacturer: Lite-On Tech.
> > | Product Name: 0888h
> > | Version:
> > | Serial Number: 01234567
> > | Handle 0x0003
> > | DMI type 3, 17 bytes.
> > | Chassis Information
> > | Manufacturer: Hewlett-Packard
> > | Type: Desktop
> > | Lock: Not Present
> > | Version:
> > | Serial Number:
> > | Asset Tag:
> > | Boot-up State: Safe
> > | Power Supply State: Safe
> > | Thermal State: Safe
> > | Security Status: None
> > | OEM Information: 0x00000000
> > | Handle 0x0004
> > | DMI type 4, 32 bytes.
> > | Processor Information
> > | Socket Designation: mPGA-478
> > | Type: Central Processor
> > | Family: Pentium 4
> > | Manufacturer: Intel
> > | ID: 29 0F 41 33 FF FB EB BF
> > | Signature: Type 0, Family 34F, Model 12, Stepping 9
> > | Flags:
> > | FPU (Floating-point unit on-chip)
> > | VME (Virtual mode extension)
> > | DE (Debugging extension)
> > | PSE (Page size extension)
> > | TSC (Time stamp counter)
> > | MSR (Model specific registers)
> > | PAE (Physical address extension)
> > | MCE (Machine check exception)
> > | CX8 (CMPXCHG8 instruction supported)
> > | APIC (On-chip APIC hardware supported)
> > | SEP (Fast system call)
> > | MTRR (Memory type range registers)
> > | PGE (Page global enable)
> > | MCA (Machine check architecture)
> > | CMOV (Conditional move instruction supported)
> > | PAT (Page attribute table)
> > | PSE-36 (36-bit page size extension)
> > | CLFSH (CLFLUSH instruction supported)
> > | DS (Debug store)
> > | ACPI (ACPI supported)
> > | MMX (MMX technology supported)
> > | FXSR (Fast floating-point save and restore)
> > | SSE (Streaming SIMD extensions)
> > | SSE2 (Streaming SIMD extensions 2)
> > | SS (Self-snoop)
> > | HTT (Hyper-threading technology)
> > | TM (Thermal monitor supported)
> > | SBF (Signal break on FERR)
> > | Version: PENTIUM 4
> > | Voltage: 2.9 V
> > | External Clock: 133 MHz
> > | Max Speed: 4000 MHz
> > | Current Speed: 2400 MHz
> > | Status: Populated, Enabled
> > | Upgrade: ZIF Socket
> > | L1 Cache Handle: 0x0005
> > | L2 Cache Handle: 0x0006
> > | L3 Cache Handle: Not Provided
> > | Handle 0x0005
> > | DMI type 7, 19 bytes.
> > | Cache Information
> > | Socket Designation: Internal Cache
> > | Configuration: Enabled, Not Socketed, Level 1
> > | Operational Mode: Write Back
> > | Location: Internal
> > | Installed Size: 8 KB
> > | Maximum Size: 1024 KB
> > | Supported SRAM Types:
> > | Synchronous
> > | Installed SRAM Type: Pipeline Burst Synchronous
> > | Speed: 40 ns
> > | Error Correction Type: Single-bit ECC
> > | System Type: Data
> > | Associativity: 4-way Set-associative
> > | Handle 0x0006
> > | DMI type 7, 19 bytes.
> > | Cache Information
> > | Socket Designation: Internal Cache
> > | Configuration: Enabled, Not Socketed, Level 2
> > | Operational Mode: Write Back
> > | Location: Internal
> > | Installed Size: 512 KB
> > | Maximum Size: 1024 KB
> > | Supported SRAM Types:
> > | Synchronous
> > | Installed SRAM Type: Synchronous
> > | Speed: 40 ns
> > | Error Correction Type: Parity
> > | System Type: Unified
> > | Associativity: 8-way Set-associative
> > | Handle 0x0007
> > | DMI type 5, 20 bytes.
> > | Memory Controller Information
> > | Error Detecting Method: None
> > | Error Correcting Capabilities: None
> > | Supported Interleave: One-way Interleave
> > | Current Interleave: One-way Interleave
> > | Maximum Memory Module Size: 1024 MB
> > | Maximum Total Memory Size: 2048 MB
> > | Supported Speeds:
> > | Other
> > | Supported Memory Types:
> > | DIMM
> > | SDRAM
> > | Memory Module Voltage: 3.3 V
> > | Associated Memory Slots: 2
> > | 0x0008
> > | 0x0009
> > | Enabled Error Correcting Capabilities: None
> > | Handle 0x0008
> > | DMI type 6, 12 bytes.
> > | Memory Module Information
> > | Socket Designation: DIMM1
> > | Bank Connections: 1 0
> > | Current Speed: Unknown
> > | Type: DIMM SDRAM
> > | Installed Size: 128 MB (Single-bank Connection)
> > | Enabled Size: 128 MB (Single-bank Connection)
> > | Error Status: OK
> > | Handle 0x0009
> > | DMI type 6, 12 bytes.
> > | Memory Module Information
> > | Socket Designation: DIMM2
> > | Bank Connections: 3 2
> > | Current Speed: Unknown
> > | Type: Unknown
> > | Installed Size: Not Installed (Single-bank Connection)
> > | Enabled Size: Not Installed (Single-bank Connection)
> > | Error Status: OK
> > | Handle 0x000A
> > | DMI type 9, 13 bytes.
> > | System Slot Information
> > | Designation: PCI1
> > | Type: 32-bit PCI
> > | Current Usage: Available
> > | Length: Long
> > | ID: 1
> > | Characteristics:
> > | 3.3 V is provided
> > | Opening is shared
> > | PME signal is supported
> > | Handle 0x000B
> > | DMI type 9, 13 bytes.
> > | System Slot Information
> > | Designation: PCI2
> > | Type: 32-bit PCI
> > | Current Usage: Available
> > | Length: Long
> > | ID: 2
> > | Characteristics:
> > | 3.3 V is provided
> > | Opening is shared
> > | PME signal is supported
> > | Handle 0x000C
> > | DMI type 9, 13 bytes.
> > | System Slot Information
> > | Designation: PCI3
> > | Type: 32-bit PCI
> > | Current Usage: Available
> > | Length: Long
> > | ID: 3
> > | Characteristics:
> > | 3.3 V is provided
> > | Opening is shared
> > | PME signal is supported
> > | Handle 0x000D
> > | DMI type 9, 13 bytes.
> > | System Slot Information
> > | Designation: AGP
> > | Type: 32-bit PCI
> > | Current Usage: Available
> > | Length: Long
> > | ID: 1
> > | Characteristics:
> > | 3.3 V is provided
> > | Opening is shared
> > | PME signal is supported
> > | Handle 0x000E
> > | DMI type 11, 5 bytes.
> > | OEM Strings
> > | String 1: SMBIOS Support from AMI
> > | Handle 0x000F
> > | DMI type 8, 9 bytes.
> > | Port Connector Information
> > | Internal Reference Designator: USB0
> > | Internal Connector Type: None
> > | External Reference Designator: USB1
> > | External Connector Type: Access Bus (USB)
> > | Port Type: USB
> > | Handle 0x0010
> > | DMI type 8, 9 bytes.
> > | Port Connector Information
> > | Internal Reference Designator: USB1
> > | Internal Connector Type: None
> > | External Reference Designator: USB2
> > | External Connector Type: Access Bus (USB)
> > | Port Type: USB
> > | Handle 0x0011
> > | DMI type 8, 9 bytes.
> > | Port Connector Information
> > | Internal Reference Designator: USB2
> > | Internal Connector Type: None
> > | External Reference Designator: USB3
> > | External Connector Type: Access Bus (USB)
> > | Port Type: USB
> > | Handle 0x0012
> > | DMI type 8, 9 bytes.
> > | Port Connector Information
> > | Internal Reference Designator: USB3
> > | Internal Connector Type: None
> > | External Reference Designator: USB4
> > | External Connector Type: Access Bus (USB)
> > | Port Type: USB
> > | Handle 0x0013
> > | DMI type 8, 9 bytes.
> > | Port Connector Information
> > | Internal Reference Designator: USB4
> > | Internal Connector Type: None
> > | External Reference Designator: USB5
> > | External Connector Type: Access Bus (USB)
> > | Port Type: USB
> > | Handle 0x0014
> > | DMI type 8, 9 bytes.
> > | Port Connector Information
> > | Internal Reference Designator: USB5
> > | Internal Connector Type: None
> > | External Reference Designator: USB6
> > | External Connector Type: Access Bus (USB)
> > | Port Type: USB
> > | Handle 0x0015
> > | DMI type 8, 9 bytes.
> > | Port Connector Information
> > | Internal Reference Designator: COM1
> > | Internal Connector Type: 9 Pin Dual Inline (pin 10 cut)
> > | External Reference Designator: COM1
> > | External Connector Type: DB-9 male
> > | Port Type: Serial Port 16550A Compatible
> > | Handle 0x0016
> > | DMI type 8, 9 bytes.
> > | Port Connector Information
> > | Internal Reference Designator: LPT
> > | Internal Connector Type: 25 Pin Dual Inline (pin 26 cut)
> > | External Reference Designator: LPT
> > | External Connector Type: DB-25 male
> > | Port Type: Parallel Port ECP/EPP
> > | Handle 0x0017
> > | DMI type 8, 9 bytes.
> > | Port Connector Information
> > | Internal Reference Designator: KEYBOARD
> > | Internal Connector Type: None
> > | External Reference Designator: KEYBOARD
> > | External Connector Type: PS/2
> > | Port Type: Keyboard Port
> > | Handle 0x0018
> > | DMI type 8, 9 bytes.
> > | Port Connector Information
> > | Internal Reference Designator: MOUSE
> > | Internal Connector Type: None
> > | External Reference Designator: MOUSE
> > | External Connector Type: PS/2
> > | Port Type: Mouse Port
> > | Handle 0x0019
> > | DMI type 8, 9 bytes.
> > | Port Connector Information
> > | Internal Reference Designator: Floppy
> > | Internal Connector Type: On Board Floppy
> > | External Reference Designator: Floppy
> > | External Connector Type: None
> > | Port Type: None
> > | Handle 0x001A
> > | DMI type 8, 9 bytes.
> > | Port Connector Information
> > | Internal Reference Designator: Primary IDE
> > | Internal Connector Type: On Board IDE
> > | External Reference Designator: IDE-1
> > | External Connector Type: None
> > | Port Type: None
> > | Handle 0x001B
> > | DMI type 8, 9 bytes.
> > | Port Connector Information
> > | Internal Reference Designator: Secondary IDE
> > | Internal Connector Type: On Board IDE
> > | External Reference Designator: IDE-2
> > | External Connector Type: None
> > | Port Type: None
> > | Handle 0x001C
> > | DMI type 12, 5 bytes.
> > | System Configuration Options
> > | Option 1: System Management BIOS from Atlanta
> > | Handle 0x001D
> > | DMI type 13, 22 bytes.
> > | BIOS Language Information
> > | Installable Languages: 4
> > | English
> > | Traditional Chinese
> > | Simplified Chinese
> > | Japanese
> > | Currently Installed Language: English
> > | Handle 0x001E
> > | DMI type 127, 4 bytes.
> > | End Of Table
> >
> >
> > --
> > ~Randy
> > -
> > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> > the body of a message to majordomo@xxxxxxxxxxxxxxx
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
> > Please read the FAQ at http://www.tux.org/lkml/
--
Henry Molina
R&D
CMN Consulting

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Vladislav Bolkhovitin: "Re: [PATCH] x86 bitops.h commentary on instruction reordering"
Previous message: brking: "[PATCH 3/3] blk_queue_tags_resize_failure"
In reply to: Henry Molina: "Re: EDD Support"
Next in thread: Randy.Dunlap: "Re: EDD Support"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]