Re: [ACPI] [PATCH][RFC] fix ACPI IRQ routing after S3 suspend

[Stefan Dösinger]

> This patch should fix multiple user-visible problems with the ACPI IRQ
> routing after S3 resume:
>
> "irq x: nobody cared"
> "my interrupts are gone"
>
> It probably applies to multiple bugzilla entries and mailing list posts.
>
> Tested on my machine, which is experiencing similar problems. Seems to
> work - although I get some non-fatal "nobody cared" messages that might
> be caused by the i8042 driver.
>
> Comments?
> Stefan, can you test this?
Sorry for the very late reply.

I tested with 2.6.8.1(I think your patch it included there) with strange 
results.

*It works fine if I unload ipw2100 before suspend and load it later
*In single user mode with ipw2100 loaded while S3, IRQ 11 is disabled on 
resume, IRQ is not disabled
*When the system is fully booted up, everything seems to work fine.

I'll test a little bit more and report the results.

Cheers,
Stefan
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/