Re: [PATCH][2.6] Add command function to struct i2c_adapter

[Michael Hunold]

Hi,

On 24.09.2004 20:05, Jean Delvare wrote:
> > We like to have an completly isolated i2c adapter, where the device 
> > driver can invite i2c drivers to connect an i2c client to. When the 
> > connection is made, an "interface" pointer with client-specific data
> > or function pointers can be provided.
> > (...)
> > - add a new NO_PROBE flag to struct i2c_adapter, so a particular
> > adapter is never probed by anyone

> I don't get it. If the adapter is isolated, there is no way the i2c-core
> will probe it anyway. As Adrian Cox underlined, it should be far easier
> and more efficient to separate these adapters from the main i2c adapters
> list from the beginning than leaving them in the main list and then try
> and prevent future probings using a flag.

There a two scenarios, where you don't have full control over the i2c 
adapter or you don't want to fully isolate the bus:

1) Some dvb drivers are bttv-sub-drivers, ie. bttv does the pci and i2c 
handling by itself. You have the struct i2c_adapter pointer, but it has 
been registered by bttv, most likely as an analog and/or digital tv i2c bus.

2) Embedded platforms have usually a system-wide i2c bus, so you cannot 
isolate the bus here.

It's useful to register both adapters and drivers to the i2c-core, so 
you keep the door open.

> Also, how does this proposal interact with the work on the i2c classes?
> Although the classes carry more information than a simple flag or a
> complete separation, both were/may be introduced to achieve the same
> goal, isn't it?

Partly, yes.

The .class approach is necessary to have a finer grained access control 
by the i2c-core regarding bus classes, ie. not the client drivers have 
to check if the bus should be probed (for example dcc drivers on a dvb 
bus). This is useful in general.

If we have a PCI card where we exactly know what we are doing, we can 
use the NO_PROBE flag to effectively block any probing and can use the 
proposed interface to manually connect the clients.

> Thanks,

CU
Michael.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/