[PATCH] serial receive lockup fix

[Paul Fulghum]

Fix lockup caused by serial driver not clearing
receive interrupt if flip buffer becomes full.

Signed-off-by: Paul Fulghum <paulkf@xxxxxxxxxxxxx>



--- a/drivers/char/serial.c	2004-09-29 09:08:35.000000000 -0500
+++ b/drivers/char/serial.c	2004-09-29 09:09:07.000000000 -0500
@@ -573,8 +573,19 @@
 	do {
 		if (tty->flip.count >= TTY_FLIPBUF_SIZE) {
 			tty->flip.tqueue.routine((void *) tty);
-			if (tty->flip.count >= TTY_FLIPBUF_SIZE)
+			if (tty->flip.count >= TTY_FLIPBUF_SIZE) {
+				/* no room in flip buffer, discard rx FIFO contents to clear IRQ
+				 * *FIXME* Hardware with auto flow control
+				 * would benefit from leaving the data in the FIFO and
+				 * disabling the rx IRQ until space becomes available.
+				 */
+				do {
+					serial_inp(info, UART_RX);
+					icount->overrun++;
+					*status = serial_inp(info, UART_LSR);
+				} while ((*status & UART_LSR_DR) && (max_count-- > 0));
 				return;		// if TTY_DONT_FLIP is set
+			}
 		}
 		ch = serial_inp(info, UART_RX);
 		*tty->flip.char_buf_ptr = ch;


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/