sata_sil command 0x25 timeout, stat 0x50 host_stat 0x64

[Johannes Peeters]

Hello,

I tried a lot of settings to get my sata drives working. I'm using 2 Sata
Sil3112 controllers (SATALink, Sil3112ACT144, Q22389.110A & Q22389.119A)
with both the latest bios (4.2.50) and 4 Maxtor Diamond Max Plug 9
(6Y200M0) harddisk.

In kernel 2.6.8.1, the siimage driver is working fine. The sata_sil driver
howevers gives me weird timeouts:

libata version 1.02 loaded.
sata_sil version 0.54
PCI: Found IRQ 9 for device 0000:00:0e.0
ata1: SATA max UDMA/100 cmd 0xD0854E80 ctl 0xD0854E8A bmdma 0xD0854E00 irq
9
ata2: SATA max UDMA/100 cmd 0xD0854EC0 ctl 0xD0854ECA bmdma 0xD0854E08 irq
9
irq 9: nobody cared!
 [<c01062ba>] __report_bad_irq+0x2a/0x90
 [<c01063b0>] note_interrupt+0x70/0xb0
 [<c01065f0>] do_IRQ+0xe0/0xf0
 [<c010497c>] common_interrupt+0x18/0x20
 [<c0118fbe>] __do_softirq+0x2e/0x80
 [<c0119037>] do_softirq+0x27/0x30
 [<c01065d5>] do_IRQ+0xc5/0xf0
 [<c010497c>] common_interrupt+0x18/0x20
 [<c021007b>] des_small_fips_encrypt+0x41b/0x9f0
 [<c010e496>] delay_tsc+0x16/0x20
 [<c0216822>] __delay+0x12/0x20
 [<d08623bd>] ata_busy_sleep+0x1d/0x130 [libata]
 [<d0861bbb>] ata_dev_identify+0xdb/0x610 [libata]
 [<c0216822>] __delay+0x12/0x20
 [<d0862852>] ata_bus_reset+0x132/0x220 [libata]
 [<d0862275>] sata_phy_reset+0xc5/0x140 [libata]
 [<d0862124>] ata_bus_probe+0x34/0xb0 [libata]
 [<d086462c>] ata_device_add+0x1ac/0x250 [libata]
 [<d0863ec0>] ata_interrupt+0x0/0x1b0 [libata]
 [<d0858511>] sil_init_one+0x281/0x320 [sata_sil]
 [<c0221702>] pci_device_probe_static+0x52/0x70
 [<c022175c>] __pci_device_probe+0x3c/0x50
 [<c022179c>] pci_device_probe+0x2c/0x50
 [<c0261caf>] bus_match+0x3f/0x70
 [<c0261ddc>] driver_attach+0x5c/0xa0
 [<c0262301>] bus_add_driver+0x91/0xb0
 [<c02628af>] driver_register+0x2f/0x40
 [<c0221a1c>] pci_register_driver+0x5c/0x90
 [<d085b00f>] sil_init+0xf/0x1b [sata_sil]
 [<c012a5c8>] sys_init_module+0x108/0x1d0
 [<c010400f>] syscall_call+0x7/0xb
handlers:
[<d0863ec0>] (ata_interrupt+0x0/0x1b0 [libata])
Disabling IRQ #9
ata1: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4003 85:7c69 86:3e01 87:4003
88:207f
ata1: dev 0 ATA, max UDMA/133, 398297088 sectors: lba48
ata1: dev 0 configured for UDMA/100
scsi0 : sata_sil
ata2: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4003 85:7c69 86:3e01 87:4003
88:207f
ata2: dev 0 ATA, max UDMA/133, 398297088 sectors: lba48
ata2: dev 0 configured for UDMA/100
scsi1 : sata_sil
  Vendor: ATA       Model: Maxtor 6Y200M0    Rev: YAR5
  Type:   Direct-Access                      ANSI SCSI revision: 05
SCSI device sda: 398297088 512-byte hdwr sectors (203928 MB)
SCSI device sda: drive cache: write back
 sda:<3>ata1: command 0x25 timeout, stat 0x50 host_stat 0x64
 unknown partition table
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0,  type 0
  Vendor: ATA       Model: Maxtor 6Y200M0    Rev: YAR5
  Type:   Direct-Access                      ANSI SCSI revision: 05
SCSI device sdb: 398297088 512-byte hdwr sectors (203928 MB)
SCSI device sdb: drive cache: write back
 sdb:<3>ata2: command 0x25 timeout, stat 0x50 host_stat 0x64
 unknown partition table
Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0
Attached scsi generic sg1 at scsi1, channel 0, id 0, lun 0,  type 0
PCI: Found IRQ 10 for device 0000:00:10.0
ata3: SATA max UDMA/100 cmd 0xD0856C80 ctl 0xD0856C8A bmdma 0xD0856C00 irq
10
ata4: SATA max UDMA/100 cmd 0xD0856CC0 ctl 0xD0856CCA bmdma 0xD0856C08 irq
10
irq 10: nobody cared!
 [<c01062ba>] __report_bad_irq+0x2a/0x90
 [<c01063b0>] note_interrupt+0x70/0xb0
 [<c01065f0>] do_IRQ+0xe0/0xf0
 [<c010497c>] common_interrupt+0x18/0x20
 [<c0118fbe>] __do_softirq+0x2e/0x80
 [<c0119037>] do_softirq+0x27/0x30
 [<c01065d5>] do_IRQ+0xc5/0xf0
 [<c010497c>] common_interrupt+0x18/0x20
 [<c021007b>] des_small_fips_encrypt+0x41b/0x9f0
 [<c010e494>] delay_tsc+0x14/0x20
 [<c0216822>] __delay+0x12/0x20
 [<d08623bd>] ata_busy_sleep+0x1d/0x130 [libata]
 [<d0861bbb>] ata_dev_identify+0xdb/0x610 [libata]
 [<c0216822>] __delay+0x12/0x20
 [<d0862852>] ata_bus_reset+0x132/0x220 [libata]
 [<d0862275>] sata_phy_reset+0xc5/0x140 [libata]
 [<d0862124>] ata_bus_probe+0x34/0xb0 [libata]
 [<d086462c>] ata_device_add+0x1ac/0x250 [libata]
 [<d0863ec0>] ata_interrupt+0x0/0x1b0 [libata]
 [<d0858511>] sil_init_one+0x281/0x320 [sata_sil]
 [<c0221702>] pci_device_probe_static+0x52/0x70
 [<c022175c>] __pci_device_probe+0x3c/0x50
 [<c022179c>] pci_device_probe+0x2c/0x50
 [<c0261caf>] bus_match+0x3f/0x70
 [<c0261ddc>] driver_attach+0x5c/0xa0
 [<c0262301>] bus_add_driver+0x91/0xb0
 [<c02628af>] driver_register+0x2f/0x40
 [<c0221a1c>] pci_register_driver+0x5c/0x90
 [<d085b00f>] sil_init+0xf/0x1b [sata_sil]
 [<c012a5c8>] sys_init_module+0x108/0x1d0
 [<c010400f>] syscall_call+0x7/0xb
handlers:
[<d0863ec0>] (ata_interrupt+0x0/0x1b0 [libata])
Disabling IRQ #10
ata3: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4003 85:7c69 86:3e01 87:4003
88:207f
ata3: dev 0 ATA, max UDMA/133, 398297088 sectors: lba48
ata3: dev 0 configured for UDMA/100
scsi2 : sata_sil
ata4: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4003 85:7c69 86:3e01 87:4003
88:207f
ata4: dev 0 ATA, max UDMA/133, 398297088 sectors: lba48
ata4: dev 0 configured for UDMA/100
scsi3 : sata_sil
  Vendor: ATA       Model: Maxtor 6Y200M0    Rev: YAR5
  Type:   Direct-Access                      ANSI SCSI revision: 05
SCSI device sdc: 398297088 512-byte hdwr sectors (203928 MB)
SCSI device sdc: drive cache: write back
 sdc:<3>ata3: command 0x25 timeout, stat 0x50 host_stat 0x64
 unknown partition table
Attached scsi disk sdc at scsi2, channel 0, id 0, lun 0
Attached scsi generic sg2 at scsi2, channel 0, id 0, lun 0,  type 0
  Vendor: ATA       Model: Maxtor 6Y200M0    Rev: YAR5
  Type:   Direct-Access                      ANSI SCSI revision: 05
SCSI device sdd: 398297088 512-byte hdwr sectors (203928 MB)
SCSI device sdd: drive cache: write back
 sdd:<3>ata4: command 0x25 timeout, stat 0x50 host_stat 0x64
 unknown partition table
Attached scsi disk sdd at scsi3, channel 0, id 0, lun 0
Attached scsi generic sg3 at scsi3, channel 0, id 0, lun 0,  type 0

Reading/writing to this disc doesn't work, this gives me an endless
process.



I also tried with 2.6.9-rc3-bk7, but that gives me an other problem:


libata version 1.02 loaded.
sata_sil version 0.54
PCI: Found IRQ 9 for device 0000:00:0e.0
ata1: SATA max UDMA/100 cmd 0xD0854E80 ctl 0xD0854E8A bmdma 0xD0854E00 irq
9
ata2: SATA max UDMA/100 cmd 0xD0854EC0 ctl 0xD0854ECA bmdma 0xD0854E08 irq
9
ata1: no device found (phy stat 00000000)
scsi0 : sata_sil
irq 9: nobody cared!
 [<c0105e9a>] __report_bad_irq+0x2a/0x90
 [<c0105f90>] note_interrupt+0x70/0xb0
 [<c01061a0>] do_IRQ+0xe0/0xf0
 [<c010413c>] common_interrupt+0x18/0x20
 [<c011801e>] __do_softirq+0x2e/0x90
 [<c01180a7>] do_softirq+0x27/0x30
 [<c0106185>] do_IRQ+0xc5/0xf0
 [<c010413c>] common_interrupt+0x18/0x20
 [<c01020c3>] default_idle+0x23/0x40
 [<c0102154>] cpu_idle+0x34/0x40
 [<c044272b>] start_kernel+0x13b/0x160
 [<c0442370>] unknown_bootoption+0x0/0x160
handlers:
[<d0865160>] (ata_interrupt+0x0/0x1c0 [libata])
Disabling IRQ #9
ata2: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4003 85:7c69 86:3e01 87:4003
88:207f
ata2: dev 0 ATA, max UDMA/133, 398297088 sectors: lba48

After this, loading the module stops. I've wait a couple of hours, but
this was the last message.
Trying to enable/disable APIC & IOAPIC didn't solve the problem.

Any suggestions?

Thanks,
Johannes Peeters
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/