Re: [BUG][2.6.8.1] Something wrong with ISAPnP and serial driver

[Denis Zaitsev]

On Sat, Oct 09, 2004 at 10:18:36PM +0200, Rene Herman wrote:
> Denis Zaitsev wrote:
> 
> > 1) The 2.6 kernel doesn't activate the ISA PnP modem at the boot,
> >    while the 2.4 one always does.
> 
> 2.4 used to scan the ISA PnP device ID string for some common substrings 
> indicating a modem given a completely unknown ISA PnP device (the code 
> is still present -- see drivers/serial/8250_pnp.c:check_name()) while 
> 2.6 really needs your modem's PnP ID to be listed.
> 
> > 2) The 8250 driver finds the PnP card's port, while the 8250_pnp finds
> >    the non-PnP ports.
> 
> 8250_pnp not finding it is therefore very likely a simple matter of it 
> not knowing that it should be driving it. Try seeing if your modem's PnP 
> ID (/sys/bus/pnp/devices/?/id) is listed in drivers/serial/8250_pnp.c 
> and if not add it (and send as a patch to Russel King).

Ok, it isn't listed (USR0009).  I'll send a patch.  BTW, there is some
other ID - /sys/devices/pnp1/01:01/card_id - and it contains USR0101.
What's this?

> 8250 itself finding it was no doubt due to you enabling the port 
> yourself so that from its standpoint, it was just another serial port 
> already present.

But why doesn't it find the two standard mb-embedded ports?  And why
they are found by 8250_pnp?  Is it a normal behaviour?

> With your modem's ID added, 8250_pnp should find and activate the
> mdem itself without you needing to do anything other than "modprobe
> 8250_pnp"

Ok.  I' trying.  The kernel is compiling...

> Hope that helps.

Thanks.  But what about the incorrect info in /proc/tty/driver/serial?
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/