Re: pl2303/usb-serial driver problem in 2.4.27-pre6

[Oleksiy]

Hi,

No, i haven't changed anything: the same cable, the same modules.
I was compiling new kernels (-pre1, -pre2 ... all patches ) and just 
after boot running pppd to test connection.
2.4.26 and all 2.4.27-preX works fine till -pre6. All after -pre6 
including 2.4.28-pre4 are not working for me...

Hardware: Dell Inspiron 1100 notebook

Marcelo Tosatti wrote:

> Pete, 
>
> I bet this has been caused by your USB changes?
>
> Can you take a look at this please?
>
> On Mon, Oct 11, 2004 at 02:22:32PM +0300, Oleksiy wrote:
>  
>
> > Hi all,
> >
> > I have a problem using GPRS inet vi my Siemens S55 attached with USB 
> > cable since kernel version 2.4.27-pre5, the link is established well, 
> > but then no packets get received, looking with tcpdump shows outgoing 
> > ping packets and just few per several minutes received back. I'm unable 
> > to ping, do nslookup, etc.
> > The problem started when i switched from kernel 2.4.26 (linux slackware 
> > 10.0) to 2.4.28-pre3. None of ppp otions haven't changed and all the 
> > same options were set during kerenel config. So i decided to test all 
> > kernels between 2.4.26 and 2.4.28-pre4 (also not working). Link works 
> > well in 2.4.27-pre5 and stop working in 2.4.27-pre6. No "strange" 
> > messages or errors in the logs. firewall is disabled (ACCEPT for all).
> >
> > i'm using:
> >
> > pppd-2.4.2
> > Siemens S55 mobile
> > USB cable (PL2303 conroller)
> >
> > USB drivers:
> >
> > ehci_hcd
> > uhci.c
> > pl2303.c
> >
> >    

--
Oleksiy
http://voodoo.com.ua

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/