Re: pl2303/usb-serial driver problem in 2.4.27-pre6

[Greg KH]

On Mon, Oct 11, 2004 at 02:22:32PM +0300, Oleksiy wrote:
> Hi all,
> 
> I have a problem using GPRS inet vi my Siemens S55 attached with USB 
> cable since kernel version 2.4.27-pre5, the link is established well, 
> but then no packets get received, looking with tcpdump shows outgoing 
> ping packets and just few per several minutes received back. I'm unable 
> to ping, do nslookup, etc.
> The problem started when i switched from kernel 2.4.26 (linux slackware 
> 10.0) to 2.4.28-pre3. None of ppp otions haven't changed and all the 
> same options were set during kerenel config. So i decided to test all 
> kernels between 2.4.26 and 2.4.28-pre4 (also not working). Link works 
> well in 2.4.27-pre5 and stop working in 2.4.27-pre6. No "strange" 
> messages or errors in the logs. firewall is disabled (ACCEPT for all).

Can you enable CONFIG_DEBUG?

There were no pl2303 driver changes between 2.4.27-pre5 and pre6, so I
don't think it's that driver...

thanks,

greg k-h
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/