[SATA] libata-dev queue updated
From: Jeff Garzik
Date: Fri Oct 15 2004 - 03:12:01 EST
BK users:
bk pull bk://gkernel.bkbits.net/libata-dev-2.6
Patch should show up at
http://www.kernel.org/pub/linux/kernel/people/jgarzik/libata/
eventually.
This will update the following files:
drivers/pci/quirks.c | 4
drivers/scsi/Kconfig | 8
drivers/scsi/Makefile | 1
drivers/scsi/ahci.c | 1023 ++++++++++++++++++++++++++++++++++++++++++++
drivers/scsi/libata-core.c | 69 ++
drivers/scsi/libata-scsi.c | 453 +++++++++++++++++--
drivers/scsi/libata.h | 7
drivers/scsi/sata_promise.c | 56 ++
drivers/scsi/sata_sil.c | 2
drivers/scsi/sata_vsc.c | 8
include/linux/ata.h | 37 -
include/linux/libata.h | 14
include/scsi/scsi.h | 3
13 files changed, 1601 insertions(+), 84 deletions(-)
through these ChangeSets:
<andyw:pobox.com>:
o [libata scsi] support 12-byte passthru CDB
o [libata scsi] passthru CDB check condition processing
o T10/04-262 ATA pass thru - patch
<erikbenada:yahoo.ca>:
o [libata sata_promise] support PATA ports on SATA controllers
<lsml:rtr.ca>:
o Export ata_scsi_simulate() for use by non-libata drivers
Brad Campbell:
o libata basic detection and errata for PATA->SATA bridges
Jeff Garzik:
o Fix build breakage related to hand-merging Brad Campbell's and Mark Lord's changes.
o [libata] fix printk warning
o [ata piix] enable ICH5/6 combined mode quirk based on BLK_DEV_IDE_SATA
o [libata ahci] more updates
o [libata ahci] fix several bugs
o [libata] add AHCI driver
Jeremy Higdon:
o per-port LED control for sata_vsc
John W. Linville:
o libata: SMART support via ATA pass-thru
diff -Nru a/drivers/pci/quirks.c b/drivers/pci/quirks.c
--- a/drivers/pci/quirks.c 2004-10-15 03:08:20 -04:00
+++ b/drivers/pci/quirks.c 2004-10-15 03:08:20 -04:00
@@ -904,7 +904,7 @@
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_EESSC, quirk_alder_ioapic );
#endif
-#ifdef CONFIG_SCSI_SATA
+#ifdef CONFIG_BLK_DEV_IDE_SATA
static void __init quirk_intel_ide_combined(struct pci_dev *pdev)
{
u8 prog, comb, tmp;
@@ -976,7 +976,7 @@
request_region(0x170, 8, "libata"); /* port 1 */
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, quirk_intel_ide_combined );
-#endif /* CONFIG_SCSI_SATA */
+#endif /* CONFIG_BLK_DEV_IDE_SATA */
int pciehp_msi_quirk;
diff -Nru a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
--- a/drivers/scsi/Kconfig 2004-10-15 03:08:20 -04:00
+++ b/drivers/scsi/Kconfig 2004-10-15 03:08:20 -04:00
@@ -406,6 +406,14 @@
If unsure, say N.
+config SCSI_SATA_AHCI
+ tristate "AHCI SATA support"
+ depends on SCSI_SATA && PCI && EXPERIMENTAL
+ help
+ This option enables support for AHCI Serial ATA.
+
+ If unsure, say N.
+
config SCSI_SATA_SVW
tristate "ServerWorks Frodo / Apple K2 SATA support (EXPERIMENTAL)"
depends on SCSI_SATA && PCI && EXPERIMENTAL
diff -Nru a/drivers/scsi/Makefile b/drivers/scsi/Makefile
--- a/drivers/scsi/Makefile 2004-10-15 03:08:20 -04:00
+++ b/drivers/scsi/Makefile 2004-10-15 03:08:20 -04:00
@@ -121,6 +121,7 @@
obj-$(CONFIG_SCSI_NSP32) += nsp32.o
obj-$(CONFIG_SCSI_IPR) += ipr.o
obj-$(CONFIG_SCSI_IBMVSCSI) += ibmvscsi/
+obj-$(CONFIG_SCSI_SATA_AHCI) += libata.o ahci.o
obj-$(CONFIG_SCSI_SATA_SVW) += libata.o sata_svw.o
obj-$(CONFIG_SCSI_ATA_PIIX) += libata.o ata_piix.o
obj-$(CONFIG_SCSI_SATA_PROMISE) += libata.o sata_promise.o
diff -Nru a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c
--- /dev/null Wed Dec 31 16:00:00 196900
+++ b/drivers/scsi/ahci.c 2004-10-15 03:08:20 -04:00
@@ -0,0 +1,1023 @@
+/*
+ * ahci.c - AHCI SATA support
+ *
+ * Copyright 2004 Red Hat, Inc.
+ *
+ * The contents of this file are subject to the Open
+ * Software License version 1.1 that can be found at
+ * http://www.opensource.org/licenses/osl-1.1.txt and is included herein
+ * by reference.
+ *
+ * Alternatively, the contents of this file may be used under the terms
+ * of the GNU General Public License version 2 (the "GPL") as distributed
+ * in the kernel source COPYING file, in which case the provisions of
+ * the GPL are applicable instead of the above. If you wish to allow
+ * the use of your version of this file only under the terms of the
+ * GPL and not to allow others to use your version of this file under
+ * the OSL, indicate your decision by deleting the provisions above and
+ * replace them with the notice and other provisions required by the GPL.
+ * If you do not delete the provisions above, a recipient may use your
+ * version of this file under either the OSL or the GPL.
+ *
+ * Version 1.0 of the AHCI specification:
+ * http://www.intel.com/technology/serialata/pdf/rev1_0.pdf
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include "scsi.h"
+#include <scsi/scsi_host.h>
+#include <linux/libata.h>
+#include <asm/io.h>
+
+#define DRV_NAME "ahci"
+#define DRV_VERSION "0.11"
+
+
+enum {
+ AHCI_PCI_BAR = 5,
+ AHCI_MAX_SG = 168, /* hardware max is 64K */
+ AHCI_DMA_BOUNDARY = 0xffffffff,
+ AHCI_USE_CLUSTERING = 0,
+ AHCI_CMD_SLOT_SZ = 32 * 32,
+ AHCI_RX_FIS_SZ = 256,
+ AHCI_CMD_TBL_HDR = 0x80,
+ AHCI_CMD_TBL_SZ = AHCI_CMD_TBL_HDR + (AHCI_MAX_SG * 16),
+ AHCI_PORT_PRIV_DMA_SZ = AHCI_CMD_SLOT_SZ + AHCI_CMD_TBL_SZ +
+ AHCI_RX_FIS_SZ,
+ AHCI_IRQ_ON_SG = (1 << 31),
+ AHCI_CMD_ATAPI = (1 << 5),
+ AHCI_CMD_WRITE = (1 << 6),
+
+ RX_FIS_D2H_REG = 0x40, /* offset of D2H Register FIS data */
+
+ board_ahci = 0,
+
+ /* global controller registers */
+ HOST_CAP = 0x00, /* host capabilities */
+ HOST_CTL = 0x04, /* global host control */
+ HOST_IRQ_STAT = 0x08, /* interrupt status */
+ HOST_PORTS_IMPL = 0x0c, /* bitmap of implemented ports */
+ HOST_VERSION = 0x10, /* AHCI spec. version compliancy */
+
+ /* HOST_CTL bits */
+ HOST_RESET = (1 << 0), /* reset controller; self-clear */
+ HOST_IRQ_EN = (1 << 1), /* global IRQ enable */
+ HOST_AHCI_EN = (1 << 31), /* AHCI enabled */
+
+ /* HOST_CAP bits */
+ HOST_CAP_64 = (1 << 31), /* PCI DAC (64-bit DMA) support */
+
+ /* registers for each SATA port */
+ PORT_LST_ADDR = 0x00, /* command list DMA addr */
+ PORT_LST_ADDR_HI = 0x04, /* command list DMA addr hi */
+ PORT_FIS_ADDR = 0x08, /* FIS rx buf addr */
+ PORT_FIS_ADDR_HI = 0x0c, /* FIS rx buf addr hi */
+ PORT_IRQ_STAT = 0x10, /* interrupt status */
+ PORT_IRQ_MASK = 0x14, /* interrupt enable/disable mask */
+ PORT_CMD = 0x18, /* port command */
+ PORT_TFDATA = 0x20, /* taskfile data */
+ PORT_SIG = 0x24, /* device TF signature */
+ PORT_CMD_ISSUE = 0x38, /* command issue */
+ PORT_SCR = 0x28, /* SATA phy register block */
+ PORT_SCR_STAT = 0x28, /* SATA phy register: SStatus */
+ PORT_SCR_CTL = 0x2c, /* SATA phy register: SControl */
+ PORT_SCR_ERR = 0x30, /* SATA phy register: SError */
+
+ /* PORT_IRQ_{STAT,MASK} bits */
+ PORT_IRQ_COLD_PRES = (1 << 31), /* cold presence detect */
+ PORT_IRQ_TF_ERR = (1 << 30), /* task file error */
+ PORT_IRQ_HBUS_ERR = (1 << 29), /* host bus fatal error */
+ PORT_IRQ_HBUS_DATA_ERR = (1 << 28), /* host bus data error */
+ PORT_IRQ_IF_ERR = (1 << 27), /* interface fatal error */
+ PORT_IRQ_IF_NONFATAL = (1 << 26), /* interface non-fatal error */
+ PORT_IRQ_OVERFLOW = (1 << 24), /* xfer exhausted available S/G */
+ PORT_IRQ_BAD_PMP = (1 << 23), /* incorrect port multiplier */
+
+ PORT_IRQ_PHYRDY = (1 << 22), /* PhyRdy changed */
+ PORT_IRQ_DEV_ILCK = (1 << 7), /* device interlock */
+ PORT_IRQ_CONNECT = (1 << 6), /* port connect change status */
+ PORT_IRQ_SG_DONE = (1 << 5), /* descriptor processed */
+ PORT_IRQ_UNK_FIS = (1 << 4), /* unknown FIS rx'd */
+ PORT_IRQ_SDB_FIS = (1 << 3), /* Set Device Bits FIS rx'd */
+ PORT_IRQ_DMAS_FIS = (1 << 2), /* DMA Setup FIS rx'd */
+ PORT_IRQ_PIOS_FIS = (1 << 1), /* PIO Setup FIS rx'd */
+ PORT_IRQ_D2H_REG_FIS = (1 << 0), /* D2H Register FIS rx'd */
+
+ PORT_IRQ_FATAL = PORT_IRQ_TF_ERR |
+ PORT_IRQ_HBUS_ERR |
+ PORT_IRQ_HBUS_DATA_ERR |
+ PORT_IRQ_IF_ERR,
+ DEF_PORT_IRQ = PORT_IRQ_FATAL | PORT_IRQ_PHYRDY |
+ PORT_IRQ_D2H_REG_FIS,
+
+ /* PORT_CMD bits */
+ PORT_CMD_LIST_ON = (1 << 15), /* cmd list DMA engine running */
+ PORT_CMD_FIS_ON = (1 << 14), /* FIS DMA engine running */
+ PORT_CMD_FIS_RX = (1 << 4), /* Enable FIS receive DMA engine */
+ PORT_CMD_POWER_ON = (1 << 2), /* Power up device */
+ PORT_CMD_SPIN_UP = (1 << 1), /* Spin up device */
+ PORT_CMD_START = (1 << 0), /* Enable port DMA engine */
+
+ PORT_CMD_ICC_ACTIVE = (0x1 << 28), /* Put i/f in active state */
+ PORT_CMD_ICC_PARTIAL = (0x2 << 28), /* Put i/f in partial state */
+ PORT_CMD_ICC_SLUMBER = (0x6 << 28), /* Put i/f in slumber state */
+};
+
+struct ahci_cmd_hdr {
+ u32 opts;
+ u32 status;
+ u32 tbl_addr;
+ u32 tbl_addr_hi;
+ u32 reserved[4];
+};
+
+struct ahci_sg {
+ u32 addr;
+ u32 addr_hi;
+ u32 reserved;
+ u32 flags_size;
+};
+
+struct ahci_host_priv {
+ unsigned long flags;
+ u32 cap; /* cache of HOST_CAP register */
+ u32 port_map; /* cache of HOST_PORTS_IMPL reg */
+};
+
+struct ahci_port_priv {
+ struct ahci_cmd_hdr *cmd_slot;
+ dma_addr_t cmd_slot_dma;
+ void *cmd_tbl;
+ dma_addr_t cmd_tbl_dma;
+ struct ahci_sg *cmd_tbl_sg;
+ void *rx_fis;
+ dma_addr_t rx_fis_dma;
+};
+
+static u32 ahci_scr_read (struct ata_port *ap, unsigned int sc_reg);
+static void ahci_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val);
+static int ahci_init_one (struct pci_dev *pdev, const struct pci_device_id *ent);
+static int ahci_qc_issue(struct ata_queued_cmd *qc);
+static irqreturn_t ahci_interrupt (int irq, void *dev_instance, struct pt_regs *regs);
+static void ahci_phy_reset(struct ata_port *ap);
+static void ahci_irq_clear(struct ata_port *ap);
+static void ahci_eng_timeout(struct ata_port *ap);
+static int ahci_port_start(struct ata_port *ap);
+static void ahci_port_stop(struct ata_port *ap);
+static void ahci_host_stop(struct ata_host_set *host_set);
+static void ahci_qc_prep(struct ata_queued_cmd *qc);
+static u8 ahci_check_status(struct ata_port *ap);
+static inline int ahci_host_intr(struct ata_port *ap, struct ata_queued_cmd *qc);
+
+static Scsi_Host_Template ahci_sht = {
+ .module = THIS_MODULE,
+ .name = DRV_NAME,
+ .queuecommand = ata_scsi_queuecmd,
+ .eh_strategy_handler = ata_scsi_error,
+ .can_queue = ATA_DEF_QUEUE,
+ .this_id = ATA_SHT_THIS_ID,
+ .sg_tablesize = AHCI_MAX_SG,
+ .max_sectors = ATA_MAX_SECTORS,
+ .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
+ .emulated = ATA_SHT_EMULATED,
+ .use_clustering = AHCI_USE_CLUSTERING,
+ .proc_name = DRV_NAME,
+ .dma_boundary = AHCI_DMA_BOUNDARY,
+ .slave_configure = ata_scsi_slave_config,
+ .bios_param = ata_std_bios_param,
+};
+
+static struct ata_port_operations ahci_ops = {
+ .port_disable = ata_port_disable,
+
+ .check_status = ahci_check_status,
+ .dev_select = ata_noop_dev_select,
+
+ .phy_reset = ahci_phy_reset,
+
+ .qc_prep = ahci_qc_prep,
+ .qc_issue = ahci_qc_issue,
+
+ .eng_timeout = ahci_eng_timeout,
+
+ .irq_handler = ahci_interrupt,
+ .irq_clear = ahci_irq_clear,
+
+ .scr_read = ahci_scr_read,
+ .scr_write = ahci_scr_write,
+
+ .port_start = ahci_port_start,
+ .port_stop = ahci_port_stop,
+ .host_stop = ahci_host_stop,
+};
+
+static struct ata_port_info ahci_port_info[] = {
+ /* board_ahci */
+ {
+ .sht = &ahci_sht,
+ .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+ ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO,
+ .pio_mask = 0x03, /* pio3-4 */
+ .udma_mask = 0x7f, /* udma0-6 ; FIXME */
+ .port_ops = &ahci_ops,
+ },
+};
+
+static struct pci_device_id ahci_pci_tbl[] = {
+ { PCI_VENDOR_ID_INTEL, 0x2652, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ board_ahci },
+ { PCI_VENDOR_ID_INTEL, 0x2653, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ board_ahci },
+ { } /* terminate list */
+};
+
+
+static struct pci_driver ahci_pci_driver = {
+ .name = DRV_NAME,
+ .id_table = ahci_pci_tbl,
+ .probe = ahci_init_one,
+ .remove = ata_pci_remove_one,
+};
+
+
+static inline unsigned long ahci_port_base_ul (unsigned long base, unsigned int port)
+{
+ return base + 0x100 + (port * 0x80);
+}
+
+static inline void *ahci_port_base (void *base, unsigned int port)
+{
+ return (void *) ahci_port_base_ul((unsigned long)base, port);
+}
+
+static void ahci_host_stop(struct ata_host_set *host_set)
+{
+ struct ahci_host_priv *hpriv = host_set->private_data;
+ kfree(hpriv);
+}
+
+static int ahci_port_start(struct ata_port *ap)
+{
+ struct pci_dev *pdev = ap->host_set->pdev;
+ struct ahci_host_priv *hpriv = ap->host_set->private_data;
+ struct ahci_port_priv *pp;
+ int rc;
+ void *mem, *mmio = ap->host_set->mmio_base;
+ void *port_mmio = ahci_port_base(mmio, ap->port_no);
+ dma_addr_t mem_dma;
+
+ rc = ata_port_start(ap);
+ if (rc)
+ return rc;
+
+ pp = kmalloc(sizeof(*pp), GFP_KERNEL);
+ if (!pp) {
+ rc = -ENOMEM;
+ goto err_out;
+ }
+ memset(pp, 0, sizeof(*pp));
+
+ mem = pci_alloc_consistent(pdev, AHCI_PORT_PRIV_DMA_SZ, &mem_dma);
+ if (!mem) {
+ rc = -ENOMEM;
+ goto err_out_kfree;
+ }
+ memset(mem, 0, AHCI_PORT_PRIV_DMA_SZ);
+
+ /*
+ * First item in chunk of DMA memory: 32-slot command table,
+ * 32 bytes each in size
+ */
+ pp->cmd_slot = mem;
+ pp->cmd_slot_dma = mem_dma;
+
+ mem += AHCI_CMD_SLOT_SZ;
+ mem_dma += AHCI_CMD_SLOT_SZ;
+
+ /*
+ * Second item: Received-FIS area
+ */
+ pp->rx_fis = mem;
+ pp->rx_fis_dma = mem_dma;
+
+ mem += AHCI_RX_FIS_SZ;
+ mem_dma += AHCI_RX_FIS_SZ;
+
+ /*
+ * Third item: data area for storing a single command
+ * and its scatter-gather table
+ */
+ pp->cmd_tbl = mem;
+ pp->cmd_tbl_dma = mem_dma;
+
+ pp->cmd_tbl_sg = mem + AHCI_CMD_TBL_HDR;
+
+ ap->private_data = pp;
+
+ if (hpriv->cap & HOST_CAP_64)
+ writel((pp->cmd_slot_dma >> 16) >> 16, port_mmio + PORT_LST_ADDR_HI);
+ writel(pp->cmd_slot_dma & 0xffffffff, port_mmio + PORT_LST_ADDR);
+ readl(port_mmio + PORT_LST_ADDR); /* flush */
+
+ if (hpriv->cap & HOST_CAP_64)
+ writel((pp->rx_fis_dma >> 16) >> 16, port_mmio + PORT_FIS_ADDR_HI);
+ writel(pp->rx_fis_dma & 0xffffffff, port_mmio + PORT_LST_ADDR);
+ readl(port_mmio + PORT_LST_ADDR); /* flush */
+
+ writel(PORT_CMD_ICC_ACTIVE | PORT_CMD_FIS_RX |
+ PORT_CMD_POWER_ON | PORT_CMD_SPIN_UP |
+ PORT_CMD_START, port_mmio + PORT_CMD);
+ readl(port_mmio + PORT_CMD); /* flush */
+
+ return 0;
+
+err_out_kfree:
+ kfree(pp);
+err_out:
+ ata_port_stop(ap);
+ return rc;
+}
+
+
+static void ahci_port_stop(struct ata_port *ap)
+{
+ struct pci_dev *pdev = ap->host_set->pdev;
+ struct ahci_port_priv *pp = ap->private_data;
+ void *mmio = ap->host_set->mmio_base;
+ void *port_mmio = ahci_port_base(mmio, ap->port_no);
+ u32 tmp;
+
+ tmp = readl(port_mmio + PORT_CMD);
+ tmp &= ~(PORT_CMD_START | PORT_CMD_FIS_RX);
+ writel(tmp, port_mmio + PORT_CMD);
+ readl(port_mmio + PORT_CMD); /* flush */
+
+ /* spec says 500 msecs for each PORT_CMD_{START,FIS_RX} bit, so
+ * this is slightly incorrect.
+ */
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ schedule_timeout((HZ / 2) + 1);
+
+ ap->private_data = NULL;
+ pci_free_consistent(pdev, AHCI_PORT_PRIV_DMA_SZ,
+ pp->cmd_slot, pp->cmd_slot_dma);
+ kfree(pp);
+ ata_port_stop(ap);
+}
+
+static u32 ahci_scr_read (struct ata_port *ap, unsigned int sc_reg_in)
+{
+ unsigned int sc_reg;
+
+ switch (sc_reg_in) {
+ case SCR_STATUS: sc_reg = 0; break;
+ case SCR_CONTROL: sc_reg = 1; break;
+ case SCR_ERROR: sc_reg = 2; break;
+ case SCR_ACTIVE: sc_reg = 3; break;
+ default:
+ return 0xffffffffU;
+ }
+
+ return readl((void *) ap->ioaddr.scr_addr + (sc_reg * 4));
+}
+
+
+static void ahci_scr_write (struct ata_port *ap, unsigned int sc_reg_in,
+ u32 val)
+{
+ unsigned int sc_reg;
+
+ switch (sc_reg_in) {
+ case SCR_STATUS: sc_reg = 0; break;
+ case SCR_CONTROL: sc_reg = 1; break;
+ case SCR_ERROR: sc_reg = 2; break;
+ case SCR_ACTIVE: sc_reg = 3; break;
+ default:
+ return;
+ }
+
+ writel(val, (void *) ap->ioaddr.scr_addr + (sc_reg * 4));
+}
+
+static void ahci_phy_reset(struct ata_port *ap)
+{
+ void __iomem *port_mmio = (void __iomem *) ap->ioaddr.cmd_addr;
+ struct ata_taskfile tf;
+ struct ata_device *dev = &ap->device[0];
+ u32 tmp;
+
+ __sata_phy_reset(ap);
+
+ if (ap->flags & ATA_FLAG_PORT_DISABLED)
+ return;
+
+ tmp = readl(port_mmio + PORT_SIG);
+ tf.lbah = (tmp >> 24) & 0xff;
+ tf.lbam = (tmp >> 16) & 0xff;
+ tf.lbal = (tmp >> 8) & 0xff;
+ tf.nsect = (tmp) & 0xff;
+
+ dev->class = ata_dev_classify(&tf);
+ if (!ata_dev_present(dev))
+ ata_port_disable(ap);
+}
+
+static u8 ahci_check_status(struct ata_port *ap)
+{
+ void *mmio = (void *) ap->ioaddr.cmd_addr;
+
+ return readl(mmio + PORT_TFDATA) & 0xFF;
+}
+
+static void ahci_fill_sg(struct ata_queued_cmd *qc)
+{
+ struct ahci_port_priv *pp = qc->ap->private_data;
+ unsigned int i;
+
+ VPRINTK("ENTER\n");
+
+ /*
+ * Next, the S/G list.
+ */
+ for (i = 0; i < qc->n_elem; i++) {
+ u32 sg_len;
+ dma_addr_t addr;
+
+ addr = sg_dma_address(&qc->sg[i]);
+ sg_len = sg_dma_len(&qc->sg[i]);
+
+ pp->cmd_tbl_sg[i].addr = cpu_to_le32(addr & 0xffffffff);
+ pp->cmd_tbl_sg[i].addr_hi = cpu_to_le32((addr >> 16) >> 16);
+ pp->cmd_tbl_sg[i].flags_size = cpu_to_le32(sg_len - 1);
+ }
+}
+
+static void ahci_qc_prep(struct ata_queued_cmd *qc)
+{
+ struct ahci_port_priv *pp = qc->ap->private_data;
+ u32 opts;
+ const u32 cmd_fis_len = 5; /* five dwords */
+
+ /*
+ * Fill in command slot information (currently only one slot,
+ * slot 0, is currently since we don't do queueing)
+ */
+
+ opts = (qc->n_elem << 16) | cmd_fis_len;
+ if (qc->tf.flags & ATA_TFLAG_WRITE)
+ opts |= AHCI_CMD_WRITE;
+
+ switch (qc->tf.protocol) {
+ case ATA_PROT_ATAPI:
+ case ATA_PROT_ATAPI_NODATA:
+ case ATA_PROT_ATAPI_DMA:
+ opts |= AHCI_CMD_ATAPI;
+ break;
+
+ default:
+ /* do nothing */
+ break;
+ }
+
+ pp->cmd_slot[0].opts = cpu_to_le32(opts);
+ pp->cmd_slot[0].status = 0;
+ pp->cmd_slot[0].tbl_addr = cpu_to_le32(pp->cmd_tbl_dma & 0xffffffff);
+ pp->cmd_slot[0].tbl_addr_hi = cpu_to_le32((pp->cmd_tbl_dma >> 16) >> 16);
+
+ /*
+ * Fill in command table information. First, the header,
+ * a SATA Register - Host to Device command FIS.
+ */
+ ata_tf_to_fis(&qc->tf, pp->cmd_tbl, 0);
+
+ if (!(qc->flags & ATA_QCFLAG_DMAMAP))
+ return;
+
+ ahci_fill_sg(qc);
+}
+
+static inline void ahci_dma_complete (struct ata_port *ap,
+ struct ata_queued_cmd *qc,
+ int have_err)
+{
+ /* get drive status; clear intr; complete txn */
+ ata_qc_complete(ata_qc_from_tag(ap, ap->active_tag),
+ have_err ? ATA_ERR : 0);
+}
+
+static void ahci_intr_error(struct ata_port *ap, u32 irq_stat)
+{
+ void *mmio = ap->host_set->mmio_base;
+ void *port_mmio = ahci_port_base(mmio, ap->port_no);
+ u32 tmp;
+ int work;
+
+ /* stop DMA */
+ tmp = readl(port_mmio + PORT_CMD);
+ tmp &= PORT_CMD_START | PORT_CMD_FIS_RX;
+ writel(tmp, port_mmio + PORT_CMD);
+
+ /* wait for engine to stop. TODO: this could be
+ * as long as 500 msec
+ */
+ work = 1000;
+ while (work-- > 0) {
+ tmp = readl(port_mmio + PORT_CMD);
+ if ((tmp & PORT_CMD_LIST_ON) == 0)
+ break;
+ udelay(10);
+ }
+
+ /* clear SATA phy error, if any */
+ tmp = readl(port_mmio + PORT_SCR_ERR);
+ writel(tmp, port_mmio + PORT_SCR_ERR);
+
+ /* if DRQ/BSY is set, device needs to be reset.
+ * if so, issue COMRESET
+ */
+ tmp = readl(port_mmio + PORT_TFDATA);
+ if (tmp & (ATA_BUSY | ATA_DRQ)) {
+ writel(0x301, port_mmio + PORT_SCR_CTL);
+ readl(port_mmio + PORT_SCR_CTL); /* flush */
+ udelay(10);
+ writel(0x300, port_mmio + PORT_SCR_CTL);
+ readl(port_mmio + PORT_SCR_CTL); /* flush */
+ }
+
+ /* re-start DMA */
+ tmp = readl(port_mmio + PORT_CMD);
+ tmp |= PORT_CMD_START | PORT_CMD_FIS_RX;
+ writel(tmp, port_mmio + PORT_CMD);
+ readl(port_mmio + PORT_CMD); /* flush */
+
+ printk(KERN_WARNING "ata%u: error occurred, port reset\n", ap->port_no);
+}
+
+static void ahci_eng_timeout(struct ata_port *ap)
+{
+ void *mmio = ap->host_set->mmio_base;
+ void *port_mmio = ahci_port_base(mmio, ap->port_no);
+ struct ata_queued_cmd *qc;
+
+ DPRINTK("ENTER\n");
+
+ ahci_intr_error(ap, readl(port_mmio + PORT_IRQ_STAT));
+
+ qc = ata_qc_from_tag(ap, ap->active_tag);
+ if (!qc) {
+ printk(KERN_ERR "ata%u: BUG: timeout without command\n",
+ ap->id);
+ } else {
+ /* hack alert! We cannot use the supplied completion
+ * function from inside the ->eh_strategy_handler() thread.
+ * libata is the only user of ->eh_strategy_handler() in
+ * any kernel, so the default scsi_done() assumes it is
+ * not being called from the SCSI EH.
+ */
+ qc->scsidone = scsi_finish_command;
+ ata_qc_complete(qc, ATA_ERR);
+ }
+
+}
+
+static inline int ahci_host_intr(struct ata_port *ap, struct ata_queued_cmd *qc)
+{
+ void *mmio = ap->host_set->mmio_base;
+ void *port_mmio = ahci_port_base(mmio, ap->port_no);
+ u32 status, serr, ci;
+
+ serr = readl(port_mmio + PORT_SCR_ERR);
+ writel(serr, port_mmio + PORT_SCR_ERR);
+
+ status = readl(port_mmio + PORT_IRQ_STAT);
+ writel(status, port_mmio + PORT_IRQ_STAT);
+
+ ci = readl(port_mmio + PORT_CMD_ISSUE);
+ if (likely((ci & 0x1) == 0)) {
+ if (qc) {
+ ata_qc_complete(qc, 0);
+ qc = NULL;
+ }
+ }
+
+ if (status & PORT_IRQ_FATAL) {
+ ahci_intr_error(ap, status);
+ if (qc)
+ ata_qc_complete(qc, ATA_ERR);
+ }
+
+ return 1;
+}
+
+static void ahci_irq_clear(struct ata_port *ap)
+{
+ /* TODO */
+}
+
+static irqreturn_t ahci_interrupt (int irq, void *dev_instance, struct pt_regs *regs)
+{
+ struct ata_host_set *host_set = dev_instance;
+ struct ahci_host_priv *hpriv;
+ unsigned int i, handled = 0;
+ void *mmio;
+ u32 irq_stat, irq_ack = 0;
+
+ VPRINTK("ENTER\n");
+
+ hpriv = host_set->private_data;
+ mmio = host_set->mmio_base;
+
+ /* sigh. 0xffffffff is a valid return from h/w */
+ irq_stat = readl(mmio + HOST_IRQ_STAT);
+ irq_stat &= hpriv->port_map;
+ if (!irq_stat)
+ return IRQ_NONE;
+
+ spin_lock(&host_set->lock);
+
+ for (i = 0; i < host_set->n_ports; i++) {
+ struct ata_port *ap;
+ u32 tmp;
+
+ VPRINTK("port %u\n", i);
+ ap = host_set->ports[i];
+ tmp = irq_stat & (1 << i);
+ if (tmp && ap) {
+ struct ata_queued_cmd *qc;
+ qc = ata_qc_from_tag(ap, ap->active_tag);
+ if (ahci_host_intr(ap, qc))
+ irq_ack |= (1 << i);
+ }
+ }
+
+ if (irq_ack) {
+ writel(irq_ack, mmio + HOST_IRQ_STAT);
+ handled = 1;
+ }
+
+ spin_unlock(&host_set->lock);
+
+ VPRINTK("EXIT\n");
+
+ return IRQ_RETVAL(handled);
+}
+
+static int ahci_qc_issue(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ void *mmio = (void *) ap->ioaddr.cmd_addr;
+
+ writel(1, mmio + PORT_CMD_ISSUE);
+ readl(mmio + PORT_CMD_ISSUE); /* flush */
+
+ return 0;
+}
+
+static void ahci_setup_port(struct ata_ioports *port, unsigned long base,
+ unsigned int port_idx)
+{
+ VPRINTK("ENTER, base==0x%lx, port_idx %u\n", base, port_idx);
+ base = ahci_port_base_ul(base, port_idx);
+ VPRINTK("base now==0x%lx\n", base);
+
+ port->cmd_addr = base;
+ port->scr_addr = base + PORT_SCR;
+
+ VPRINTK("EXIT\n");
+}
+
+static int ahci_host_init(struct ata_probe_ent *probe_ent)
+{
+ struct ahci_host_priv *hpriv = probe_ent->private_data;
+ struct pci_dev *pdev = probe_ent->pdev;
+ void __iomem *mmio = probe_ent->mmio_base;
+ u32 tmp, cap_save;
+ u16 tmp16;
+ unsigned int i, j, using_dac;
+ int rc;
+ void __iomem *port_mmio;
+
+ cap_save = readl(mmio + HOST_CAP);
+ cap_save &= ( (1<<28) | (1<<17) );
+ cap_save |= (1 << 27);
+
+ /* global controller reset */
+ tmp = readl(mmio + HOST_CTL);
+ if ((tmp & HOST_RESET) == 0) {
+ writel(tmp | HOST_RESET, mmio + HOST_CTL);
+ readl(mmio + HOST_CTL); /* flush */
+ }
+
+ /* reset must complete within 1 second, or
+ * the hardware should be considered fried.
+ */
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ schedule_timeout(HZ + 1);
+
+ tmp = readl(mmio + HOST_CTL);
+ if (tmp & HOST_RESET) {
+ printk(KERN_ERR DRV_NAME "(%s): controller reset failed (0x%x)\n",
+ pci_name(pdev), tmp);
+ return -EIO;
+ }
+
+ writel(HOST_AHCI_EN, mmio + HOST_CTL);
+ (void) readl(mmio + HOST_CTL); /* flush */
+ writel(cap_save, mmio + HOST_CAP);
+ writel(0xf, mmio + HOST_PORTS_IMPL);
+ (void) readl(mmio + HOST_PORTS_IMPL); /* flush */
+
+ pci_read_config_word(pdev, 0x92, &tmp16);
+ tmp16 |= 0xf;
+ pci_write_config_word(pdev, 0x92, tmp16);
+
+ hpriv->cap = readl(mmio + HOST_CAP);
+ hpriv->port_map = readl(mmio + HOST_PORTS_IMPL);
+ probe_ent->n_ports = (hpriv->cap & 0x1f) + 1;
+
+ VPRINTK("cap 0x%x port_map 0x%x n_ports %d\n",
+ hpriv->cap, hpriv->port_map, probe_ent->n_ports);
+
+ using_dac = hpriv->cap & HOST_CAP_64;
+ if (using_dac &&
+ !pci_set_dma_mask(pdev, 0xffffffffffffffffULL)) {
+ rc = pci_set_consistent_dma_mask(pdev, 0xffffffffffffffffULL);
+ if (rc) {
+ rc = pci_set_consistent_dma_mask(pdev, 0xffffffffULL);
+ if (rc) {
+ printk(KERN_ERR DRV_NAME "(%s): 64-bit DMA enable failed\n",
+ pci_name(pdev));
+ return rc;
+ }
+ }
+
+ hpriv->flags |= HOST_CAP_64;
+ } else {
+ rc = pci_set_dma_mask(pdev, 0xffffffffULL);
+ if (rc) {
+ printk(KERN_ERR DRV_NAME "(%s): 32-bit DMA enable failed\n",
+ pci_name(pdev));
+ return rc;
+ }
+ rc = pci_set_consistent_dma_mask(pdev, 0xffffffffULL);
+ if (rc) {
+ printk(KERN_ERR DRV_NAME "(%s): 32-bit consistent DMA enable failed\n",
+ pci_name(pdev));
+ return rc;
+ }
+ }
+
+ for (i = 0; i < probe_ent->n_ports; i++) {
+ if (!(hpriv->port_map & (1 << i)))
+ continue;
+
+ port_mmio = ahci_port_base(mmio, i);
+ VPRINTK("mmio %p port_mmio %p\n", mmio, port_mmio);
+
+ ahci_setup_port(&probe_ent->port[i],
+ (unsigned long) mmio, i);
+
+ /* make sure port is not active */
+ tmp = readl(port_mmio + PORT_CMD);
+ VPRINTK("PORT_CMD 0x%x\n", tmp);
+ if (tmp & (PORT_CMD_LIST_ON | PORT_CMD_FIS_ON |
+ PORT_CMD_FIS_RX | PORT_CMD_START)) {
+ tmp &= ~(PORT_CMD_LIST_ON | PORT_CMD_FIS_ON |
+ PORT_CMD_FIS_RX | PORT_CMD_START);
+ writel(tmp, port_mmio + PORT_CMD);
+ readl(port_mmio + PORT_CMD); /* flush */
+
+ /* spec says 500 msecs for each bit, so
+ * this is slightly incorrect.
+ */
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ schedule_timeout((HZ / 2) + 1);
+ }
+
+ writel(PORT_CMD_SPIN_UP, port_mmio + PORT_CMD);
+
+ j = 0;
+ while (j < 100) {
+ msleep(10);
+ tmp = readl(port_mmio + PORT_SCR_STAT);
+ if ((tmp & 0xf) == 0x3)
+ break;
+ j++;
+ }
+
+ tmp = readl(port_mmio + PORT_SCR_ERR);
+ VPRINTK("PORT_SCR_ERR 0x%x\n", tmp);
+ writel(tmp, port_mmio + PORT_SCR_ERR);
+
+ /* ack any pending irq events for this port */
+ tmp = readl(port_mmio + PORT_IRQ_STAT);
+ VPRINTK("PORT_IRQ_STAT 0x%x\n", tmp);
+ if (tmp)
+ writel(tmp, port_mmio + PORT_IRQ_STAT);
+
+ writel(1 << i, mmio + HOST_IRQ_STAT);
+
+ /* set irq mask (enables interrupts) */
+ writel(DEF_PORT_IRQ, port_mmio + PORT_IRQ_MASK);
+ }
+
+ tmp = readl(mmio + HOST_CTL);
+ VPRINTK("HOST_CTL 0x%x\n", tmp);
+ writel(tmp | HOST_IRQ_EN, mmio + HOST_CTL);
+ tmp = readl(mmio + HOST_CTL);
+ VPRINTK("HOST_CTL 0x%x\n", tmp);
+
+ pci_set_master(pdev);
+
+ return 0;
+}
+
+/* move to PCI layer, integrate w/ MSI stuff */
+static void pci_enable_intx(struct pci_dev *pdev)
+{
+ u16 pci_command;
+
+ pci_read_config_word(pdev, PCI_COMMAND, &pci_command);
+ if (pci_command & PCI_COMMAND_INTX_DISABLE) {
+ pci_command &= ~PCI_COMMAND_INTX_DISABLE;
+ pci_write_config_word(pdev, PCI_COMMAND, pci_command);
+ }
+}
+
+static void ahci_print_info(struct ata_probe_ent *probe_ent)
+{
+ struct ahci_host_priv *hpriv = probe_ent->private_data;
+ struct pci_dev *pdev = probe_ent->pdev;
+ void *mmio = probe_ent->mmio_base;
+ u32 vers, cap, impl, speed;
+ const char *speed_s;
+
+ vers = readl(mmio + HOST_VERSION);
+ cap = hpriv->cap;
+ impl = hpriv->port_map;
+
+ speed = (cap >> 20) & 0xf;
+ if (speed == 1)
+ speed_s = "1.5";
+ else if (speed == 2)
+ speed_s = "3";
+ else
+ speed_s = "?";
+
+ printk(KERN_INFO DRV_NAME "(%s) AHCI %02x%02x.%02x%02x "
+ "%u slots %u ports %s Gbps 0x%x impl\n"
+ ,
+ pci_name(pdev),
+
+ (vers >> 24) & 0xff,
+ (vers >> 16) & 0xff,
+ (vers >> 8) & 0xff,
+ vers & 0xff,
+
+ ((cap >> 8) & 0x1f) + 1,
+ (cap & 0x1f) + 1,
+ speed_s,
+ impl);
+
+ printk(KERN_INFO DRV_NAME "(%s) flags: "
+ "%s%s%s%s%s%s"
+ "%s%s%s%s%s%s%s\n"
+ ,
+ pci_name(pdev),
+
+ cap & (1 << 31) ? "64bit " : "",
+ cap & (1 << 30) ? "ncq " : "",
+ cap & (1 << 28) ? "ilck " : "",
+ cap & (1 << 27) ? "stag " : "",
+ cap & (1 << 26) ? "pm " : "",
+ cap & (1 << 25) ? "led " : "",
+
+ cap & (1 << 24) ? "clo " : "",
+ cap & (1 << 19) ? "nz " : "",
+ cap & (1 << 18) ? "only " : "",
+ cap & (1 << 17) ? "pmp " : "",
+ cap & (1 << 15) ? "pio " : "",
+ cap & (1 << 14) ? "slum " : "",
+ cap & (1 << 13) ? "part " : ""
+ );
+}
+
+static int ahci_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+ static int printed_version;
+ struct ata_probe_ent *probe_ent = NULL;
+ struct ahci_host_priv *hpriv;
+ unsigned long base;
+ void *mmio_base;
+ unsigned int board_idx = (unsigned int) ent->driver_data;
+ int rc;
+
+ VPRINTK("ENTER\n");
+
+ if (!printed_version++)
+ printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
+
+ /*
+ * If this driver happens to only be useful on Apple's K2, then
+ * we should check that here as it has a normal Serverworks ID
+ */
+ rc = pci_enable_device(pdev);
+ if (rc)
+ return rc;
+
+ rc = pci_request_regions(pdev, DRV_NAME);
+ if (rc)
+ goto err_out;
+
+ pci_enable_intx(pdev);
+
+ probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL);
+ if (probe_ent == NULL) {
+ rc = -ENOMEM;
+ goto err_out_regions;
+ }
+
+ memset(probe_ent, 0, sizeof(*probe_ent));
+ probe_ent->pdev = pdev;
+ INIT_LIST_HEAD(&probe_ent->node);
+
+ mmio_base = ioremap(pci_resource_start(pdev, AHCI_PCI_BAR),
+ pci_resource_len(pdev, AHCI_PCI_BAR));
+ if (mmio_base == NULL) {
+ rc = -ENOMEM;
+ goto err_out_free_ent;
+ }
+ base = (unsigned long) mmio_base;
+
+ hpriv = kmalloc(sizeof(*hpriv), GFP_KERNEL);
+ if (!hpriv) {
+ rc = -ENOMEM;
+ goto err_out_iounmap;
+ }
+ memset(hpriv, 0, sizeof(*hpriv));
+
+ probe_ent->sht = ahci_port_info[board_idx].sht;
+ probe_ent->host_flags = ahci_port_info[board_idx].host_flags;
+ probe_ent->pio_mask = ahci_port_info[board_idx].pio_mask;
+ probe_ent->udma_mask = ahci_port_info[board_idx].udma_mask;
+ probe_ent->port_ops = ahci_port_info[board_idx].port_ops;
+
+ probe_ent->irq = pdev->irq;
+ probe_ent->irq_flags = SA_SHIRQ;
+ probe_ent->mmio_base = mmio_base;
+ probe_ent->private_data = hpriv;
+
+ /* initialize adapter */
+ rc = ahci_host_init(probe_ent);
+ if (rc)
+ goto err_out_hpriv;
+
+ ahci_print_info(probe_ent);
+
+ /* FIXME: check ata_device_add return value */
+ ata_device_add(probe_ent);
+ kfree(probe_ent);
+
+ return 0;
+
+err_out_hpriv:
+ kfree(hpriv);
+err_out_iounmap:
+ iounmap(mmio_base);
+err_out_free_ent:
+ kfree(probe_ent);
+err_out_regions:
+ pci_release_regions(pdev);
+err_out:
+ pci_disable_device(pdev);
+ return rc;
+}
+
+
+static int __init ahci_init(void)
+{
+ return pci_module_init(&ahci_pci_driver);
+}
+
+
+static void __exit ahci_exit(void)
+{
+ pci_unregister_driver(&ahci_pci_driver);
+}
+
+
+MODULE_AUTHOR("Jeff Garzik");
+MODULE_DESCRIPTION("AHCI SATA low-level driver");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, ahci_pci_tbl);
+
+module_init(ahci_init);
+module_exit(ahci_exit);
diff -Nru a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
--- a/drivers/scsi/libata-core.c 2004-10-15 03:08:20 -04:00
+++ b/drivers/scsi/libata-core.c 2004-10-15 03:08:20 -04:00
@@ -829,17 +829,17 @@
* caller.
*/
-void ata_dev_id_string(struct ata_device *dev, unsigned char *s,
+void ata_dev_id_string(u16 *id, unsigned char *s,
unsigned int ofs, unsigned int len)
{
unsigned int c;
while (len > 0) {
- c = dev->id[ofs] >> 8;
+ c = id[ofs] >> 8;
*s = c;
s++;
- c = dev->id[ofs] & 0xff;
+ c = id[ofs] & 0xff;
*s = c;
s++;
@@ -1082,7 +1082,7 @@
*/
/* we require LBA and DMA support (bits 8 & 9 of word 49) */
- if (!ata_id_has_dma(dev) || !ata_id_has_lba(dev)) {
+ if (!ata_id_has_dma(dev->id) || !ata_id_has_lba(dev->id)) {
printk(KERN_DEBUG "ata%u: no dma/lba\n", ap->id);
goto err_out_nosup;
}
@@ -1100,7 +1100,7 @@
/* ATA-specific feature tests */
if (dev->class == ATA_DEV_ATA) {
- if (!ata_id_is_ata(dev)) /* sanity check */
+ if (!ata_id_is_ata(dev->id)) /* sanity check */
goto err_out_nosup;
tmp = dev->id[ATA_ID_MAJOR_VER];
@@ -1114,11 +1114,11 @@
goto err_out_nosup;
}
- if (ata_id_has_lba48(dev)) {
+ if (ata_id_has_lba48(dev->id)) {
dev->flags |= ATA_DFLAG_LBA48;
- dev->n_sectors = ata_id_u64(dev, 100);
+ dev->n_sectors = ata_id_u64(dev->id, 100);
} else {
- dev->n_sectors = ata_id_u32(dev, 60);
+ dev->n_sectors = ata_id_u32(dev->id, 60);
}
ap->host->max_cmd_len = 16;
@@ -1133,7 +1133,7 @@
/* ATAPI-specific feature tests */
else {
- if (ata_id_is_ata(dev)) /* sanity check */
+ if (ata_id_is_ata(dev->id)) /* sanity check */
goto err_out_nosup;
rc = atapi_cdb_len(dev->id);
@@ -1162,6 +1162,49 @@
DPRINTK("EXIT, err\n");
}
+
+static inline u8 ata_dev_knobble(struct ata_port *ap)
+{
+ struct ata_device *dev;
+ int i;
+
+ if (ap->cbl != ATA_CBL_SATA)
+ return 0;
+
+ for (i = 0; i < ATA_MAX_DEVICES; i++) {
+ dev = &ap->device[i];
+ if (ata_dev_present(dev) && (!ata_id_is_sata(dev->id)))
+ return 1;
+ }
+
+ return 0;
+}
+
+/**
+ * ata_dev_config - Run device specific handlers and check for
+ * SATA->PATA bridges
+ * @ap: Bus
+ * @i: Device
+ *
+ * LOCKING:
+ */
+
+void ata_dev_config(struct ata_port *ap, unsigned int i)
+{
+ /* limit bridge transfers to udma5, 200 sectors */
+ if (ata_dev_knobble(ap)) {
+ printk(KERN_INFO "ata%u(%u): applying bridge limits\n",
+ ap->id, ap->device->devno);
+ ap->udma_mask &= ATA_UDMA5;
+ ap->host->max_sectors = ATA_MAX_SECTORS;
+ ap->host->hostt->max_sectors = ATA_MAX_SECTORS;
+ ap->device->flags |= ATA_DFLAG_LOCK_SECTORS;
+ }
+
+ if (ap->ops->dev_config)
+ ap->ops->dev_config(ap, &ap->device[i]);
+}
+
/**
* ata_bus_probe - Reset and probe ATA bus
* @ap: Bus to probe
@@ -1184,8 +1227,7 @@
ata_dev_identify(ap, i);
if (ata_dev_present(&ap->device[i])) {
found = 1;
- if (ap->ops->dev_config)
- ap->ops->dev_config(ap, &ap->device[i]);
+ ata_dev_config(ap,i);
}
}
@@ -1946,7 +1988,7 @@
sg->offset = (unsigned long) buf & ~PAGE_MASK;
sg_dma_len(sg) = buflen;
- WARN_ON(buflen > PAGE_SIZE);
+// WARN_ON(buflen > PAGE_SIZE);
}
void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg,
@@ -3038,6 +3080,7 @@
ap->mwdma_mask = ent->mwdma_mask;
ap->udma_mask = ent->udma_mask;
ap->flags |= ent->host_flags;
+ ap->flags |= ent->port_flags[port_no];
ap->ops = ent->port_ops;
ap->cbl = ATA_CBL_NONE;
ap->active_tag = ATA_TAG_POISON;
@@ -3660,6 +3703,8 @@
EXPORT_SYMBOL_GPL(ata_scsi_error);
EXPORT_SYMBOL_GPL(ata_scsi_slave_config);
EXPORT_SYMBOL_GPL(ata_scsi_release);
+EXPORT_SYMBOL_GPL(ata_scsi_simulate);
EXPORT_SYMBOL_GPL(ata_host_intr);
EXPORT_SYMBOL_GPL(ata_dev_classify);
EXPORT_SYMBOL_GPL(ata_dev_id_string);
+EXPORT_SYMBOL_GPL(ata_dev_config);
diff -Nru a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c
--- a/drivers/scsi/libata-scsi.c 2004-10-15 03:08:20 -04:00
+++ b/drivers/scsi/libata-scsi.c 2004-10-15 03:08:20 -04:00
@@ -29,14 +29,14 @@
#include "scsi.h"
#include <scsi/scsi_host.h>
#include <linux/libata.h>
+#include <linux/hdreg.h>
#include <asm/uaccess.h>
#include "libata.h"
+#define SECTOR_SIZE 512
+
typedef unsigned int (*ata_xlat_func_t)(struct ata_queued_cmd *qc, u8 *scsicmd);
-static void ata_scsi_simulate(struct ata_port *ap, struct ata_device *dev,
- struct scsi_cmnd *cmd,
- void (*done)(struct scsi_cmnd *));
static struct ata_device *
ata_scsi_find_dev(struct ata_port *ap, struct scsi_device *scsidev);
@@ -70,6 +70,146 @@
return 0;
}
+/**
+ * ata_cmd_ioctl - Handler for HDIO_DRIVE_CMD ioctl
+ * @dev: Device to whom we are issuing command
+ * @arg: User provided data for issuing command
+ *
+ * LOCKING:
+ * Defined by the SCSI layer. We don't really care.
+ *
+ * RETURNS:
+ * Zero on success, negative errno on error.
+ */
+
+int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg)
+{
+ int rc = 0;
+ u8 scsi_cmd[MAX_COMMAND_SIZE];
+ u8 args[4], *argbuf = NULL;
+ int argsize = 0;
+ struct scsi_request *sreq;
+
+ if (NULL == (void *)arg)
+ return -EINVAL;
+
+ if (copy_from_user(args, arg, sizeof(args)))
+ return -EFAULT;
+
+ sreq = scsi_allocate_request(scsidev, GFP_KERNEL);
+ if (!sreq)
+ return -EINTR;
+
+ memset(scsi_cmd, 0, sizeof(scsi_cmd));
+
+ if (args[3]) {
+ argsize = SECTOR_SIZE * args[3];
+ argbuf = kmalloc(argsize, GFP_KERNEL);
+ if (argbuf == NULL)
+ return -ENOMEM;
+
+ scsi_cmd[1] = (4 << 1); /* PIO Data-in */
+ sreq->sr_data_direction = DMA_FROM_DEVICE;
+ } else {
+ scsi_cmd[1] = (3 << 1); /* Non-data */
+ sreq->sr_data_direction = DMA_NONE;
+ }
+
+ scsi_cmd[0] = ATA_16;
+ scsi_cmd[2] = 0x1f; /* no off.line or cc, yes all registers */
+
+ scsi_cmd[4] = args[2];
+ if (args[0] == WIN_SMART) { /* hack -- ide driver does this too... */
+ scsi_cmd[6] = args[3];
+ scsi_cmd[8] = args[1];
+ scsi_cmd[10] = 0x4f;
+ scsi_cmd[12] = 0xc2;
+ } else {
+ scsi_cmd[6] = args[1];
+ }
+ scsi_cmd[14] = args[0];
+
+ /* Good values for timeout and retries? Values below
+ from scsi_ioctl_send_command() for default case... */
+ scsi_wait_req(sreq, scsi_cmd, argbuf, argsize, (10*HZ), 5);
+
+ if (sreq->sr_result) {
+ rc = -EIO;
+ goto error;
+ }
+
+ /* Need code to retrieve data from check condition? */
+
+ if ((argbuf)
+ && copy_to_user((void *)(arg + sizeof(args)), argbuf, argsize))
+ rc = -EFAULT;
+error:
+ scsi_release_request(sreq);
+
+ if (argbuf)
+ kfree(argbuf);
+
+ return rc;
+}
+
+/**
+ * ata_task_ioctl - Handler for HDIO_DRIVE_TASK ioctl
+ * @dev: Device to whom we are issuing command
+ * @arg: User provided data for issuing command
+ *
+ * LOCKING:
+ * Defined by the SCSI layer. We don't really care.
+ *
+ * RETURNS:
+ * Zero on success, negative errno on error.
+ */
+int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg)
+{
+ int rc = 0;
+ u8 scsi_cmd[MAX_COMMAND_SIZE];
+ u8 args[7];
+ struct scsi_request *sreq;
+
+ if (NULL == (void *)arg)
+ return -EINVAL;
+
+ if (copy_from_user(args, arg, sizeof(args)))
+ return -EFAULT;
+
+ memset(scsi_cmd, 0, sizeof(scsi_cmd));
+ scsi_cmd[0] = ATA_16;
+ scsi_cmd[1] = (3 << 1); /* Non-data */
+ scsi_cmd[2] = 0x1f; /* no off.line or cc, yes all registers */
+ scsi_cmd[4] = args[1];
+ scsi_cmd[6] = args[2];
+ scsi_cmd[8] = args[3];
+ scsi_cmd[10] = args[4];
+ scsi_cmd[12] = args[5];
+ scsi_cmd[14] = args[0];
+
+ sreq = scsi_allocate_request(scsidev, GFP_KERNEL);
+ if (!sreq) {
+ rc = -EINTR;
+ goto error;
+ }
+
+ sreq->sr_data_direction = DMA_NONE;
+ /* Good values for timeout and retries? Values below
+ from scsi_ioctl_send_command() for default case... */
+ scsi_wait_req(sreq, scsi_cmd, NULL, 0, (10*HZ), 5);
+
+ if (sreq->sr_result) {
+ rc = -EIO;
+ goto error;
+ }
+
+ /* Need code to retrieve data from check condition? */
+
+error:
+ scsi_release_request(sreq);
+ return rc;
+}
+
int ata_scsi_ioctl(struct scsi_device *scsidev, int cmd, void __user *arg)
{
struct ata_port *ap;
@@ -99,6 +239,16 @@
return -EINVAL;
return 0;
+ case HDIO_DRIVE_CMD:
+ if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO))
+ return -EACCES;
+ return ata_cmd_ioctl(scsidev, arg);
+
+ case HDIO_DRIVE_TASK:
+ if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO))
+ return -EACCES;
+ return ata_task_ioctl(scsidev, arg);
+
default:
rc = -EOPNOTSUPP;
break;
@@ -315,6 +465,85 @@
}
}
+/*
+ * ata_pass_thru_cc - Generate check condition sense block.
+ * @qc: Command that completed.
+ *
+ * Regardless of whether the command errored or not, return
+ * a sense block. Copy all controller registers into
+ * the sense block. Clear sense key, ASC & ASCQ if
+ * there is no error.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host_set lock)
+ */
+void ata_pass_thru_cc(struct ata_queued_cmd *qc, u8 drv_stat)
+{
+ struct scsi_cmnd *cmd = qc->scsicmd;
+ struct ata_taskfile *tf = &qc->tf;
+ unsigned char *sb = cmd->sense_buffer;
+ unsigned char *desc = sb + 8 ;
+
+ cmd->result = SAM_STAT_CHECK_CONDITION;
+
+ /*
+ * Use ata_to_sense_error() to map status register bits
+ * onto sense key, asc & ascq. We will overwrite some
+ * (many) of the fields later.
+ *
+ * TODO: reorganise better, by splitting ata_to_sense_error()
+ */
+ if (unlikely(drv_stat & (ATA_BUSY | ATA_DF | ATA_ERR | ATA_DRQ))) {
+ ata_to_sense_error(qc, drv_stat) ;
+ } else {
+ sb[3] = sb[2] = sb[1] = 0x00 ;
+ }
+
+ /*
+ * Sense data is current and format is
+ * descriptor.
+ */
+ sb[0] = 0x72 ;
+
+ desc[0] = 0x8e ; /* TODO: replace with official value. */
+
+ /*
+ * Set length of additional sense data.
+ * Since we only populate descriptor 0, the total
+ * length is the same (fixed) length as descriptor 0.
+ */
+ desc[1] = sb[7] = 14 ;
+
+ /*
+ * Read the controller registers.
+ */
+ qc->ap->ops->tf_read(qc->ap, tf);
+
+ /*
+ * Copy registers into sense buffer.
+ */
+ desc[2] = 0x00 ;
+ desc[3] = tf->feature ; /* Note: becomes error register when read. */
+ desc[5] = tf->nsect ;
+ desc[7] = tf->lbal ;
+ desc[9] = tf->lbam ;
+ desc[11] = tf->lbah ;
+ desc[12] = tf->device ;
+ desc[13] = drv_stat ;
+
+ /*
+ * Fill in Extend bit, and the high order bytes
+ * if applicable.
+ */
+ if (tf->flags & ATA_TFLAG_LBA48) {
+ desc[2] |= 0x01 ;
+ desc[4] = tf->hob_nsect ;
+ desc[6] = tf->hob_lbal ;
+ desc[8] = tf->hob_lbam ;
+ desc[10] = tf->hob_lbah ;
+ }
+}
+
/**
* ata_scsi_slave_config - Set SCSI device attributes
* @sdev: SCSI device to examine
@@ -411,7 +640,7 @@
tf->protocol = ATA_PROT_NODATA;
if ((tf->flags & ATA_TFLAG_LBA48) &&
- (ata_id_has_flush_ext(qc->dev)))
+ (ata_id_has_flush_ext(qc->dev->id)))
tf->command = ATA_CMD_FLUSH_EXT;
else
tf->command = ATA_CMD_FLUSH;
@@ -623,10 +852,23 @@
{
struct scsi_cmnd *cmd = qc->scsicmd;
- if (unlikely(drv_stat & (ATA_ERR | ATA_BUSY | ATA_DRQ)))
- ata_to_sense_error(qc, drv_stat);
- else
- cmd->result = SAM_STAT_GOOD;
+ /*
+ * If this was a pass-thru command, and the user requested
+ * a check condition return including register values.
+ * Note that check condition is generated, and the ATA
+ * register values are returned, whether the command completed
+ * successfully or not. If there was no error, SK, ASC and
+ * ASCQ will all be zero.
+ */
+ if (((cmd->cmnd[0] == ATA_16) || (cmd->cmnd[0] == ATA_12)) &&
+ (cmd->cmnd[2] & 0x20)) {
+ ata_pass_thru_cc(qc, drv_stat) ;
+ } else {
+ if (unlikely(drv_stat & (ATA_ERR | ATA_BUSY | ATA_DRQ)))
+ ata_to_sense_error(qc, drv_stat);
+ else
+ cmd->result = SAM_STAT_GOOD;
+ }
qc->scsidone(cmd);
@@ -688,7 +930,6 @@
if (xlat_func(qc, scsicmd))
goto err_out;
-
/* select device, send command to hardware */
if (ata_qc_issue(qc))
goto err_out;
@@ -757,7 +998,7 @@
/**
* ata_scsi_rbuf_fill - wrapper for SCSI command simulators
- * @args: Port / device / SCSI command of interest.
+ * @args: device IDENTIFY data / SCSI command of interest.
* @actor: Callback hook for desired SCSI command simulator
*
* Takes care of the hard work of simulating a SCSI command...
@@ -793,7 +1034,7 @@
/**
* ata_scsiop_inq_std - Simulate INQUIRY command
- * @args: Port / device / SCSI command of interest.
+ * @args: device IDENTIFY data / SCSI command of interest.
* @rbuf: Response buffer, to which simulated SCSI cmd output is sent.
* @buflen: Response buffer length.
*
@@ -807,8 +1048,6 @@
unsigned int ata_scsiop_inq_std(struct ata_scsi_args *args, u8 *rbuf,
unsigned int buflen)
{
- struct ata_device *dev = args->dev;
-
u8 hdr[] = {
TYPE_DISK,
0,
@@ -818,7 +1057,7 @@
};
/* set scsi removeable (RMB) bit per ata bit */
- if (ata_id_removeable(dev))
+ if (ata_id_removeable(args->id))
hdr[1] |= (1 << 7);
VPRINTK("ENTER\n");
@@ -827,8 +1066,8 @@
if (buflen > 35) {
memcpy(&rbuf[8], "ATA ", 8);
- ata_dev_id_string(dev, &rbuf[16], ATA_ID_PROD_OFS, 16);
- ata_dev_id_string(dev, &rbuf[32], ATA_ID_FW_REV_OFS, 4);
+ ata_dev_id_string(args->id, &rbuf[16], ATA_ID_PROD_OFS, 16);
+ ata_dev_id_string(args->id, &rbuf[32], ATA_ID_FW_REV_OFS, 4);
if (rbuf[32] == 0 || rbuf[32] == ' ')
memcpy(&rbuf[32], "n/a ", 4);
}
@@ -852,7 +1091,7 @@
/**
* ata_scsiop_inq_00 - Simulate INQUIRY EVPD page 0, list of pages
- * @args: Port / device / SCSI command of interest.
+ * @args: device IDENTIFY data / SCSI command of interest.
* @rbuf: Response buffer, to which simulated SCSI cmd output is sent.
* @buflen: Response buffer length.
*
@@ -880,7 +1119,7 @@
/**
* ata_scsiop_inq_80 - Simulate INQUIRY EVPD page 80, device serial number
- * @args: Port / device / SCSI command of interest.
+ * @args: device IDENTIFY data / SCSI command of interest.
* @rbuf: Response buffer, to which simulated SCSI cmd output is sent.
* @buflen: Response buffer length.
*
@@ -902,7 +1141,7 @@
memcpy(rbuf, hdr, sizeof(hdr));
if (buflen > (ATA_SERNO_LEN + 4))
- ata_dev_id_string(args->dev, (unsigned char *) &rbuf[4],
+ ata_dev_id_string(args->id, (unsigned char *) &rbuf[4],
ATA_ID_SERNO_OFS, ATA_SERNO_LEN);
return 0;
@@ -912,7 +1151,7 @@
/**
* ata_scsiop_inq_83 - Simulate INQUIRY EVPD page 83, device identity
- * @args: Port / device / SCSI command of interest.
+ * @args: device IDENTIFY data / SCSI command of interest.
* @rbuf: Response buffer, to which simulated SCSI cmd output is sent.
* @buflen: Response buffer length.
*
@@ -941,7 +1180,7 @@
/**
* ata_scsiop_noop -
- * @args: Port / device / SCSI command of interest.
+ * @args: device IDENTIFY data / SCSI command of interest.
* @rbuf: Response buffer, to which simulated SCSI cmd output is sent.
* @buflen: Response buffer length.
*
@@ -989,7 +1228,7 @@
/**
* ata_msense_caching - Simulate MODE SENSE caching info page
- * @dev: Device associated with this MODE SENSE command
+ * @id: device IDENTIFY data
* @ptr_io: (input/output) Location to store more output data
* @last: End of output data buffer
*
@@ -1001,7 +1240,7 @@
* None.
*/
-static unsigned int ata_msense_caching(struct ata_device *dev, u8 **ptr_io,
+static unsigned int ata_msense_caching(u16 *id, u8 **ptr_io,
const u8 *last)
{
u8 page[] = {
@@ -1011,9 +1250,9 @@
0, 0, 0, 0, 0, 0, 0, 0 /* 8 zeroes */
};
- if (ata_id_wcache_enabled(dev))
+ if (ata_id_wcache_enabled(id))
page[2] |= (1 << 2); /* write cache enable */
- if (!ata_id_rahead_enabled(dev))
+ if (!ata_id_rahead_enabled(id))
page[12] |= (1 << 5); /* disable read ahead */
ata_msense_push(ptr_io, last, page, sizeof(page));
@@ -1067,7 +1306,7 @@
/**
* ata_scsiop_mode_sense - Simulate MODE SENSE 6, 10 commands
- * @args: Port / device / SCSI command of interest.
+ * @args: device IDENTIFY data / SCSI command of interest.
* @rbuf: Response buffer, to which simulated SCSI cmd output is sent.
* @buflen: Response buffer length.
*
@@ -1081,7 +1320,6 @@
unsigned int buflen)
{
u8 *scsicmd = args->cmd->cmnd, *p, *last;
- struct ata_device *dev = args->dev;
unsigned int page_control, six_byte, output_len;
VPRINTK("ENTER\n");
@@ -1109,7 +1347,7 @@
break;
case 0x08: /* caching */
- output_len += ata_msense_caching(dev, &p, last);
+ output_len += ata_msense_caching(args->id, &p, last);
break;
case 0x0a: { /* control mode */
@@ -1119,7 +1357,7 @@
case 0x3f: /* all pages */
output_len += ata_msense_rw_recovery(&p, last);
- output_len += ata_msense_caching(dev, &p, last);
+ output_len += ata_msense_caching(args->id, &p, last);
output_len += ata_msense_ctl_mode(&p, last);
break;
@@ -1141,7 +1379,7 @@
/**
* ata_scsiop_read_cap - Simulate READ CAPACITY[ 16] commands
- * @args: Port / device / SCSI command of interest.
+ * @args: device IDENTIFY data / SCSI command of interest.
* @rbuf: Response buffer, to which simulated SCSI cmd output is sent.
* @buflen: Response buffer length.
*
@@ -1154,11 +1392,15 @@
unsigned int ata_scsiop_read_cap(struct ata_scsi_args *args, u8 *rbuf,
unsigned int buflen)
{
- u64 n_sectors = args->dev->n_sectors;
+ u64 n_sectors;
u32 tmp;
VPRINTK("ENTER\n");
+ if (ata_id_has_lba48(args->id))
+ n_sectors = ata_id_u64(args->id, 100);
+ else
+ n_sectors = ata_id_u32(args->id, 60);
n_sectors--; /* ATA TotalUserSectors - 1 */
tmp = n_sectors; /* note: truncates, if lba48 */
@@ -1196,7 +1438,7 @@
/**
* ata_scsiop_report_luns - Simulate REPORT LUNS command
- * @args: Port / device / SCSI command of interest.
+ * @args: device IDENTIFY data / SCSI command of interest.
* @rbuf: Response buffer, to which simulated SCSI cmd output is sent.
* @buflen: Response buffer length.
*
@@ -1368,6 +1610,135 @@
return dev;
}
+/*
+ * ata_scsi_map_proto - Map pass-thru protocol value to taskfile value.
+ * @byte1: Byte 1 from pass-thru CDB.
+ *
+ * RETURNS:
+ * ATA_PROT_UNKNOWN if mapping failed/unimplemented, protocol otherwise.
+ */
+static u8
+ata_scsi_map_proto(u8 byte1)
+{
+ switch((byte1 & 0x1e) >> 1) {
+ case 3: /* Non-data */
+ return ATA_PROT_NODATA;
+
+ case 6: /* DMA */
+ return ATA_PROT_DMA;
+
+ case 4: /* PIO Data-in */
+ case 5: /* PIO Data-out */
+ if (byte1 & 0xe0) {
+ return ATA_PROT_PIO_MULT;
+ }
+ return ATA_PROT_PIO;
+
+ case 10: /* Device Reset */
+ case 0: /* Hard Reset */
+ case 1: /* SRST */
+ case 2: /* Bus Idle */
+ case 7: /* Packet */
+ case 8: /* DMA Queued */
+ case 9: /* Device Diagnostic */
+ case 11: /* UDMA Data-in */
+ case 12: /* UDMA Data-Out */
+ case 13: /* FPDMA */
+ default: /* Reserved */
+ break;
+ }
+
+ return ATA_PROT_UNKNOWN;
+}
+
+/**
+ * ata_scsi_pass_thru - convert ATA pass-thru CDB to taskfile
+ * @qc: command structure to be initialized
+ * @cmd: SCSI command to convert
+ *
+ * Handles either 12 or 16-byte versions of the CDB.
+ *
+ * RETURNS:
+ * Zero on success, non-zero on failure.
+ */
+static unsigned int
+ata_scsi_pass_thru(struct ata_queued_cmd *qc, u8 *scsicmd)
+{
+ struct ata_taskfile *tf = &(qc->tf);
+ struct scsi_cmnd *cmd = qc->scsicmd;
+
+ if ((tf->protocol = ata_scsi_map_proto(scsicmd[1])) == ATA_PROT_UNKNOWN) {
+ return 1;
+ }
+
+ /*
+ * 12 and 16 byte CDBs use different offsets to
+ * provide the various register values.
+ */
+ if (scsicmd[0] == ATA_16) {
+ /*
+ * 16-byte CDB - may contain extended commands.
+ *
+ * If that is the case, copy the upper byte register values.
+ */
+ if (scsicmd[1] & 0x01) {
+ tf->hob_feature = scsicmd[3];
+ tf->hob_nsect = scsicmd[5];
+ tf->hob_lbal = scsicmd[7];
+ tf->hob_lbam = scsicmd[9];
+ tf->hob_lbah = scsicmd[11];
+ tf->flags |= ATA_TFLAG_LBA48 ;
+ } else {
+ tf->flags &= ~ATA_TFLAG_LBA48 ;
+ }
+
+ /*
+ * Always copy low byte, device and command registers.
+ */
+ tf->feature = scsicmd[4];
+ tf->nsect = scsicmd[6];
+ tf->lbal = scsicmd[8];
+ tf->lbam = scsicmd[10];
+ tf->lbah = scsicmd[12];
+ tf->device = scsicmd[13];
+ tf->command = scsicmd[14];
+ } else {
+ /*
+ * 12-byte CDB - incapable of extended commands.
+ */
+ tf->flags &= ~ATA_TFLAG_LBA48 ;
+
+ tf->feature = scsicmd[3];
+ tf->nsect = scsicmd[4];
+ tf->lbal = scsicmd[5];
+ tf->lbam = scsicmd[6];
+ tf->lbah = scsicmd[7];
+ tf->device = scsicmd[8];
+ tf->command = scsicmd[9];
+ }
+
+ /*
+ * Set flags so that all registers will be written,
+ * and pass on write indication (used for PIO/DMA
+ * setup.)
+ */
+ tf->flags |= (ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE) ;
+
+ if (cmd->sc_data_direction == SCSI_DATA_WRITE) {
+ tf->flags |= ATA_TFLAG_WRITE;
+ }
+
+ /*
+ * Set transfer length.
+ *
+ * TODO: find out if we need to do more here to
+ * cover scatter/gather case.
+ */
+ qc->nsect = cmd->bufflen / ATA_SECT_SIZE ;
+
+ return 0;
+}
+
/**
* ata_get_xlat_func - check if SCSI to ATA translation is possible
* @dev: ATA device
@@ -1400,6 +1771,10 @@
case VERIFY:
case VERIFY_16:
return ata_scsi_verify_xlat;
+
+ case ATA_12:
+ case ATA_16:
+ return ata_scsi_pass_thru ;
}
return NULL;
@@ -1472,7 +1847,7 @@
if (xlat_func)
ata_scsi_translate(ap, dev, cmd, done, xlat_func);
else
- ata_scsi_simulate(ap, dev, cmd, done);
+ ata_scsi_simulate(dev->id, cmd, done);
} else
ata_scsi_translate(ap, dev, cmd, done, atapi_xlat);
@@ -1482,8 +1857,7 @@
/**
* ata_scsi_simulate - simulate SCSI command on ATA device
- * @ap: Port to which ATA device is attached.
- * @dev: Target device for CDB.
+ * @id: current IDENTIFY data for target device.
* @cmd: SCSI command being sent to device.
* @done: SCSI command completion function.
*
@@ -1494,15 +1868,14 @@
* spin_lock_irqsave(host_set lock)
*/
-static void ata_scsi_simulate(struct ata_port *ap, struct ata_device *dev,
- struct scsi_cmnd *cmd,
- void (*done)(struct scsi_cmnd *))
+void ata_scsi_simulate(u16 *id,
+ struct scsi_cmnd *cmd,
+ void (*done)(struct scsi_cmnd *))
{
struct ata_scsi_args args;
u8 *scsicmd = cmd->cmnd;
- args.ap = ap;
- args.dev = dev;
+ args.id = id;
args.cmd = cmd;
args.done = done;
diff -Nru a/drivers/scsi/libata.h b/drivers/scsi/libata.h
--- a/drivers/scsi/libata.h 2004-10-15 03:08:20 -04:00
+++ b/drivers/scsi/libata.h 2004-10-15 03:08:20 -04:00
@@ -29,9 +29,8 @@
#define DRV_VERSION "1.02" /* must be exactly four chars */
struct ata_scsi_args {
- struct ata_port *ap;
- struct ata_device *dev;
- struct scsi_cmnd *cmd;
+ u16 *id;
+ struct scsi_cmnd *cmd;
void (*done)(struct scsi_cmnd *);
};
@@ -43,6 +42,8 @@
unsigned int wait, unsigned int can_sleep);
extern void ata_tf_to_host_nolock(struct ata_port *ap, struct ata_taskfile *tf);
extern void swap_buf_le16(u16 *buf, unsigned int buf_words);
+extern int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg);
+extern int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg);
/* libata-scsi.c */
diff -Nru a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c
--- a/drivers/scsi/sata_promise.c 2004-10-15 03:08:20 -04:00
+++ b/drivers/scsi/sata_promise.c 2004-10-15 03:08:20 -04:00
@@ -79,6 +79,8 @@
static int pdc_port_start(struct ata_port *ap);
static void pdc_port_stop(struct ata_port *ap);
static void pdc_phy_reset(struct ata_port *ap);
+static void pdc_pata_phy_reset(struct ata_port *ap);
+static void pdc_pata_cbl_detect(struct ata_port *ap);
static void pdc_qc_prep(struct ata_queued_cmd *qc);
static void pdc_tf_load_mmio(struct ata_port *ap, struct ata_taskfile *tf);
static void pdc_exec_command_mmio(struct ata_port *ap, struct ata_taskfile *tf);
@@ -127,7 +129,7 @@
/* board_2037x */
{
.sht = &pdc_sata_sht,
- .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+ .host_flags = /* ATA_FLAG_SATA | */ ATA_FLAG_NO_LEGACY |
ATA_FLAG_SRST | ATA_FLAG_MMIO,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
@@ -244,7 +246,35 @@
static void pdc_phy_reset(struct ata_port *ap)
{
pdc_reset_port(ap);
- sata_phy_reset(ap);
+ if (ap->flags & ATA_FLAG_SATA)
+ sata_phy_reset(ap);
+ else
+ pdc_pata_phy_reset(ap);
+}
+
+static void pdc_pata_cbl_detect(struct ata_port *ap)
+{
+ u8 tmp;
+ void *mmio = (void *) ap->ioaddr.cmd_addr + PDC_CTLSTAT + 0x03;
+
+ tmp = readb(mmio);
+
+ if (tmp & 0x01)
+ {
+ ap->cbl = ATA_CBL_PATA40;
+ ap->udma_mask &= ATA_UDMA_MASK_40C;
+ }
+ else
+ ap->cbl = ATA_CBL_PATA80;
+}
+
+static void pdc_pata_phy_reset(struct ata_port *ap)
+{
+ pdc_pata_cbl_detect(ap);
+
+ ata_port_probe(ap);
+
+ ata_bus_reset(ap);
}
static u32 pdc_sata_scr_read (struct ata_port *ap, unsigned int sc_reg)
@@ -547,6 +577,7 @@
void *mmio_base;
unsigned int board_idx = (unsigned int) ent->driver_data;
int rc;
+ u8 tmp;
if (!printed_version++)
printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
@@ -605,6 +636,9 @@
probe_ent->port[0].scr_addr = base + 0x400;
probe_ent->port[1].scr_addr = base + 0x500;
+ probe_ent->port_flags[0] = ATA_FLAG_SATA;
+ probe_ent->port_flags[1] = ATA_FLAG_SATA;
+
/* notice 4-port boards */
switch (board_idx) {
case board_20319:
@@ -615,9 +649,25 @@
probe_ent->port[2].scr_addr = base + 0x600;
probe_ent->port[3].scr_addr = base + 0x700;
+
+ probe_ent->port_flags[2] = ATA_FLAG_SATA;
+ probe_ent->port_flags[3] = ATA_FLAG_SATA;
break;
case board_2037x:
- probe_ent->n_ports = 2;
+ /* Some boards have also PATA port */
+ tmp = readb(base + PDC_FLASH_CTL+1);
+ if (!(tmp & 0x80))
+ {
+ probe_ent->n_ports = 3;
+
+ pdc_sata_setup_port(&probe_ent->port[2], base + 0x300);
+
+ probe_ent->port_flags[2] = ATA_FLAG_SLAVE_POSS;
+
+ printk(KERN_INFO DRV_NAME " PATA port found\n");
+ }
+ else
+ probe_ent->n_ports = 2;
break;
default:
BUG();
diff -Nru a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c
--- a/drivers/scsi/sata_sil.c 2004-10-15 03:08:20 -04:00
+++ b/drivers/scsi/sata_sil.c 2004-10-15 03:08:20 -04:00
@@ -287,7 +287,7 @@
const char *s;
unsigned int len;
- ata_dev_id_string(dev, model_num, ATA_ID_PROD_OFS,
+ ata_dev_id_string(dev->id, model_num, ATA_ID_PROD_OFS,
sizeof(model_num));
s = &model_num[0];
len = strnlen(s, sizeof(model_num));
diff -Nru a/drivers/scsi/sata_vsc.c b/drivers/scsi/sata_vsc.c
--- a/drivers/scsi/sata_vsc.c 2004-10-15 03:08:20 -04:00
+++ b/drivers/scsi/sata_vsc.c 2004-10-15 03:08:20 -04:00
@@ -333,6 +333,14 @@
pci_set_master(pdev);
+ /*
+ * Config offset 0x98 is "Extended Control and Status Register 0"
+ * Default value is (1 << 28). All bits except bit 28 are reserved in
+ * DPA mode. If bit 28 is set, LED 0 reflects all ports' activity.
+ * If bit 28 is clear, each port has its own LED.
+ */
+ pci_write_config_dword(pdev, 0x98, 0);
+
/* FIXME: check ata_device_add return value */
ata_device_add(probe_ent);
kfree(probe_ent);
diff -Nru a/include/linux/ata.h b/include/linux/ata.h
--- a/include/linux/ata.h 2004-10-15 03:08:20 -04:00
+++ b/include/linux/ata.h 2004-10-15 03:08:20 -04:00
@@ -217,24 +217,25 @@
u8 command; /* IO operation */
};
-#define ata_id_is_ata(dev) (((dev)->id[0] & (1 << 15)) == 0)
-#define ata_id_rahead_enabled(dev) ((dev)->id[85] & (1 << 6))
-#define ata_id_wcache_enabled(dev) ((dev)->id[85] & (1 << 5))
-#define ata_id_has_flush(dev) ((dev)->id[83] & (1 << 12))
-#define ata_id_has_flush_ext(dev) ((dev)->id[83] & (1 << 13))
-#define ata_id_has_lba48(dev) ((dev)->id[83] & (1 << 10))
-#define ata_id_has_wcache(dev) ((dev)->id[82] & (1 << 5))
-#define ata_id_has_pm(dev) ((dev)->id[82] & (1 << 3))
-#define ata_id_has_lba(dev) ((dev)->id[49] & (1 << 9))
-#define ata_id_has_dma(dev) ((dev)->id[49] & (1 << 8))
-#define ata_id_removeable(dev) ((dev)->id[0] & (1 << 7))
-#define ata_id_u32(dev,n) \
- (((u32) (dev)->id[(n) + 1] << 16) | ((u32) (dev)->id[(n)]))
-#define ata_id_u64(dev,n) \
- ( ((u64) dev->id[(n) + 3] << 48) | \
- ((u64) dev->id[(n) + 2] << 32) | \
- ((u64) dev->id[(n) + 1] << 16) | \
- ((u64) dev->id[(n) + 0]) )
+#define ata_id_is_ata(id) (((id)[0] & (1 << 15)) == 0)
+#define ata_id_is_sata(id) ((id)[93] == 0)
+#define ata_id_rahead_enabled(id) ((id)[85] & (1 << 6))
+#define ata_id_wcache_enabled(id) ((id)[85] & (1 << 5))
+#define ata_id_has_flush(id) ((id)[83] & (1 << 12))
+#define ata_id_has_flush_ext(id) ((id)[83] & (1 << 13))
+#define ata_id_has_lba48(id) ((id)[83] & (1 << 10))
+#define ata_id_has_wcache(id) ((id)[82] & (1 << 5))
+#define ata_id_has_pm(id) ((id)[82] & (1 << 3))
+#define ata_id_has_lba(id) ((id)[49] & (1 << 9))
+#define ata_id_has_dma(id) ((id)[49] & (1 << 8))
+#define ata_id_removeable(id) ((id)[0] & (1 << 7))
+#define ata_id_u32(id,n) \
+ (((u32) (id)[(n) + 1] << 16) | ((u32) (id)[(n)]))
+#define ata_id_u64(id,n) \
+ ( ((u64) (id)[(n) + 3] << 48) | \
+ ((u64) (id)[(n) + 2] << 32) | \
+ ((u64) (id)[(n) + 1] << 16) | \
+ ((u64) (id)[(n) + 0]) )
static inline int atapi_cdb_len(u16 *dev_id)
{
diff -Nru a/include/linux/libata.h b/include/linux/libata.h
--- a/include/linux/libata.h 2004-10-15 03:08:20 -04:00
+++ b/include/linux/libata.h 2004-10-15 03:08:20 -04:00
@@ -197,6 +197,7 @@
unsigned long irq;
unsigned int irq_flags;
unsigned long host_flags;
+ unsigned long port_flags[ATA_MAX_PORTS];
void __iomem *mmio_base;
void *private_data;
};
@@ -405,8 +406,9 @@
extern void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg,
unsigned int n_elem);
extern unsigned int ata_dev_classify(struct ata_taskfile *tf);
-extern void ata_dev_id_string(struct ata_device *dev, unsigned char *s,
+extern void ata_dev_id_string(u16 *id, unsigned char *s,
unsigned int ofs, unsigned int len);
+extern void ata_dev_config(struct ata_port *ap, unsigned int i);
extern void ata_bmdma_setup (struct ata_queued_cmd *qc);
extern void ata_bmdma_start (struct ata_queued_cmd *qc);
extern void ata_bmdma_irq_clear(struct ata_port *ap);
@@ -417,7 +419,9 @@
struct block_device *bdev,
sector_t capacity, int geom[]);
extern int ata_scsi_slave_config(struct scsi_device *sdev);
-
+extern void ata_scsi_simulate(u16 *id,
+ struct scsi_cmnd *cmd,
+ void (*done)(struct scsi_cmnd *));
static inline unsigned int ata_tag_valid(unsigned int tag)
{
@@ -615,9 +619,9 @@
static inline int ata_try_flush_cache(struct ata_device *dev)
{
- return ata_id_wcache_enabled(dev) ||
- ata_id_has_flush(dev) ||
- ata_id_has_flush_ext(dev);
+ return ata_id_wcache_enabled(dev->id) ||
+ ata_id_has_flush(dev->id) ||
+ ata_id_has_flush_ext(dev->id);
}
#endif /* __LINUX_LIBATA_H__ */
diff -Nru a/include/scsi/scsi.h b/include/scsi/scsi.h
--- a/include/scsi/scsi.h 2004-10-15 03:08:20 -04:00
+++ b/include/scsi/scsi.h 2004-10-15 03:08:20 -04:00
@@ -113,6 +113,9 @@
/* values for service action in */
#define SAI_READ_CAPACITY_16 0x10
+/* Temporary values for T10/04-262 until official values are allocated */
+#define ATA_16 0x85 /* 16-byte pass-thru [0x85 == unused]*/
+#define ATA_12 0xb3 /* 12-byte pass-thru [0xb3 == obsolete set limits command] */
/*
* SCSI Architecture Model (SAM) Status codes. Taken from SAM-3 draft
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/