Re: ATA/133 Problems with multiple cards

[Hans-Peter Jansen]

[Heavily stripped address lists]

On Sunday 17 October 2004 04:51, James Stevenson wrote:
>
> then i can only turn the dma up to ATA/100 if i set it to ata/133
> it will cause the errors. I assume this is something todo with the
> promise bois not setting up the 3rd card at boot time. It only
> shows drive listing for 2 of the 3 cards.

As noted before, this effect was always related to different firmware 
versions on the cards here. Please check boot messages of all cards 
separately, and confirm, that this isn't your problem.

Thanks,
Pete

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/