RE: PROMISE Ultra133 TX2 (PDC20269)

[Piszcz, Justin Michael]

After you try to set it with -X68 (udma4) check the udma setting, if it
has not changed, type 'dmesg' and check for any error messages and post
them back to the list.

I also use the same card and have not had these problems; however, the
smallest drive I use is 40GB.



-----Original Message-----
From: linux-kernel-owner@xxxxxxxxxxxxxxx
[mailto:linux-kernel-owner@xxxxxxxxxxxxxxx] On Behalf Of Enrico Bartky
Sent: Friday, November 12, 2004 10:14 AM
To: linux-kernel@xxxxxxxxxxxxxxx
Subject: PROMISE Ultra133 TX2 (PDC20269)

Hello,

I have the following problem with my controller:

I have attached a 8 GB UDMA4 Harddisk, but it works only with UDMA2. The
controller BIOS displays the right mode (4), but in the kernel dmesg it
comes with pio. after i execute hdparm -I /dev/hde it says:

... udma2* udma3 udma4

If I try to force the UDMA4 mode with hdparm -Xudma4 /dev/hde , ...
theres no difference. The harddisk leaves at udma2.

What can I do?
I have tried 2.4.26, 2.6.9, 2.6.10-rc1...

Can you help me?

Thanx, EnricoB
________________________________________________________________
Verschicken Sie romantische, coole und witzige Bilder per SMS!
Jetzt neu bei WEB.DE FreeMail: http://freemail.web.de/?mc=021193

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel"
in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/