Re: ide-cd problem

[Jens Axboe]

On Sat, Nov 20 2004, Alan Chandler wrote:
> I have been trying to track down why all attempts to burn a cd on my
> ide cdrw fails (see bug #3741 on bugzilla ), with a subprocess of
> cdrecord ending up hanging in uninterruptable sleep state.
> 
> I think I understand what is happening, I just don't know what to do
> about it.
> 
> Inside drivers/ide/ide-cd.c
> 
> the ide_do_rw_cdrom routine has been called via a request with the
> request flags having the REQ_BLOCK_PC flag set.  The request->data_len
> of this request is set to 0.
> 
> This request is sent to the device and it generates interrupts to
> eventually land it up inside the routine cdrom_newpc_intr.
> 
> At this point the status register on the hardware is set to 0x58 -
> implying, I think that the DRQ_STAT bit is set and that something
> should be sent to the device.
> 
> Normally, because the requested data_len is not zero, the data is
> sent.  In this case however, because the original request had nothing
> to send, the while/if clauses to initiate a new transfer are skipped
> and the routine ends up setting a new interrupt handler address and
> returning to await an interrupt that will never come.

The big question is - what does the original command look like? Just
dumping rq->cmd[0] would be a big help, but really just put code in
sg_io() in block/scsi_ioctl.c to dump the completed sg_io_hdr_t and send
that.

> Question: should something validate that the request length is not
> zero earlier, or should there be a check in ide-cd.c, or is it my
> hardware (its a generic cd read/rewriter which announces itself as
> 'CW078D CD-R/RW')

It's hard to know, you would have to parse every command type to verify
if the dxfer_len made sense or not. It's perfectly possible to generate
a command that would hang the drive as you describe above, only to be
aborted after it times out.

-- 
Jens Axboe

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/