[BUG] pdc202xx_new and ACPI fails

From: Nico Schottelius
Date: Sat Dec 04 2004 - 20:00:50 EST

Hello dear developers,

when loading pdc202xx_new on a 2.6.9 kernel with ACPI on the moprobe
call will never return and prints many errors [0].

The controller is a Promise Technology, Inc. PDC20270 (FastTrak100 LP/TX2/TX4) (rev 02).

If loading the driver without the forced option, it says deactivated
by BIOS.

On the other hand, when loading with apm onlyi and enabling forced,
it works fine [1].

So my questions:

- Why does it fail with ACPI?
- Is it possible to fix that? If, how?
- Is it possible to make forced enabling a module option?like force_against_bios=0|1
- Where in which bios (controller/Mainboard) should one activate the ports?

Greetings,

Nico

[0]: see attached dmesg.eiche

[1]:
PDC20270: IDE controller at PCI slot 0000:02:01.0
PDC20270: chipset revision 2
PDC20270: ROM enabled at 0xdfee0000
PDC20270: 100% native mode on irq 10
ide2: BM-DMA at 0xbc00-0xbc07, BIOS settings: hde:pio, hdf:pio
ide3: BM-DMA at 0xbc08-0xbc0f, BIOS settings: hdg:pio, hdh:pio
ide4: BM-DMA at 0xa800-0xa807, BIOS settings: hdi:pio, hdj:pio
ide5: BM-DMA at 0xa808-0xa80f, BIOS settings: hdk:pio, hdl:pio
Probing IDE interface ide2...
Probing IDE interface ide3...
hdh: IDE DVD-ROM 16X, ATAPI CD/DVD-ROM drive
ide3 at 0xc400-0xc407,0xc002 on irq 10
Probing IDE interface ide4...
Probing IDE interface ide5...
hdk: WDC WD1200BB-00GUA0, ATA DISK drive
ide5 at 0xb000-0xb007,0xac02 on irq 10
hdk: max request size: 1024KiB
hdk: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
hdk: cache flushes supported
/dev/ide/host4/bus1/target0/lun0: unknown partition table


--
Keep it simple & stupid, use what's available.
Please use pgp encryption: 8D0E 27A4 is my id.
http://nico.schotteli.us | http://linux.schottelius.org
Linux version 2.6.9 (root@eiche) (gcc version 3.3.4 (Debian 1:3.3.4-11)) #11 Sun Dec 5 01:44:49 CET 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
BIOS-e820: 000000000fff0000 - 000000000fff8000 (ACPI data)
BIOS-e820: 000000000fff8000 - 0000000010000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
255MB LOWMEM available.
On node 0 totalpages: 65520
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 61424 pages, LIFO batch:14
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 AMI ) @ 0x000fa700
ACPI: RSDT (v001 AMIINT VIA_K7 0x00000010 MSFT 0x00000097) @ 0x0fff0000
ACPI: FADT (v001 AMIINT VIA_K7 0x00000011 MSFT 0x00000097) @ 0x0fff0030
ACPI: MADT (v001 AMIINT VIA_K7 0x00000009 MSFT 0x00000097) @ 0x0fff00c0
ACPI: DSDT (v001 VIA KM266 0x00001000 MSFT 0x0100000d) @ 0x00000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 6:6 APIC version 16
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Built 1 zonelists
Kernel command line: rsbac_softmode
Initializing CPU#0
PID hash table entries: 1024 (order: 10, 16384 bytes)
Detected 1249.937 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 255772k/262080k available (2260k kernel code, 5740k reserved, 656k data, 164k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 2449.40 BogoMIPS (lpj=1224704)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000
CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000020
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Athlon(tm) XP stepping 02
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=2 pin2=-1
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfdae1, last bus=2
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040816
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Power Resource [URP1] (off)
ACPI: Power Resource [URP2] (off)
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [LPTP] (off)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
ACPI: PCI interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 21
ACPI: PCI interrupt 0000:00:10.1[B] -> GSI 21 (level, low) -> IRQ 21
ACPI: PCI interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 21
ACPI: PCI interrupt 0000:00:10.3[D] -> GSI 21 (level, low) -> IRQ 21
ACPI: PCI interrupt 0000:00:11.1[A]: no GSI
ACPI: PCI interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 22
ACPI: PCI interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 23
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI interrupt 0000:02:01.0[A] -> GSI 19 (level, low) -> IRQ 19
ACPI: PCI interrupt 0000:02:02.0[A] -> GSI 16 (level, low) -> IRQ 16
Machine check exception polling timer started.
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch@xxxxxxxxxxxxx)
devfs: boot_options: 0x1
SGI XFS with ACLs, no debug enabled
SGI XFS Quota Management subsystem
Initializing Cryptographic API
PCI: Via IRQ fixup for 0000:00:10.1, from 3 to 5
PCI: Via IRQ fixup for 0000:00:10.0, from 11 to 5
Linux agpgart interface v0.100 (c) Dave Jones
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:11.1
ACPI: PCI interrupt 0000:00:11.1[A]: no GSI
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: SAMSUNG SV2042H, ATA DISK drive
Using cfq io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: WDC WD400EB-00CPF0, ATA DISK drive
hdd: SAMSUNG SV3064D, ATA DISK drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
ide2: Wait for ready failed before probe !
Probing IDE interface ide3...
ide3: Wait for ready failed before probe !
Probing IDE interface ide4...
ide4: Wait for ready failed before probe !
Probing IDE interface ide5...
ide5: Wait for ready failed before probe !
hda: max request size: 128KiB
hda: 39865392 sectors (20411 MB) w/426KiB Cache, CHS=39549/16/63, UDMA(100)
hda: cache flushes not supported
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3
hdc: max request size: 128KiB
hdc: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
hdc: cache flushes not supported
/dev/ide/host0/bus1/target0/lun0: unknown partition table
hdd: max request size: 128KiB
hdd: 59794560 sectors (30614 MB) w/434KiB Cache, CHS=59320/16/63, UDMA(66)
hdd: cache flushes not supported
/dev/ide/host0/bus1/target1/lun0: unknown partition table
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
input: ImExPS/2 Logitech Explorer Mouse on isa0060/serio1
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
ACPI: (supports S0 S1 S4 S5)
ACPI wakeup devices:
PCI0 UAR1 USB1 USB2 USB3 EHCI PS2M PS2K AC9 MC9 ILAN SLPB
BIOS EDD facility v0.16 2004-Jun-25, 4 devices found
Mount JFS Failure: -22
XFS mounting filesystem hda2
Ending clean XFS mount for filesystem: hda2
VFS: Mounted root (xfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 164k freed
Adding 112444k swap on /dev/ide/host0/bus0/target0/lun0/part3. Priority:-1 extents:1
device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@xxxxxxxxxxxxxx
XFS mounting filesystem hda1
Ending clean XFS mount for filesystem: hda1
XFS mounting filesystem hdc
Ending clean XFS mount for filesystem: hdc
XFS mounting filesystem hdd
Ending clean XFS mount for filesystem: hdd
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.2
ACPI: PCI interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: irq 21, io base 0000e400
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:10.1[B] -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: irq 21, io base 0000e800
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: irq 21, io base 0000ec00
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:10.3[D] -> GSI 21 (level, low) -> IRQ 21
ehci_hcd 0000:00:10.3: EHCI Host Controller
ehci_hcd 0000:00:10.3: irq 21, pci mem d0806f00
ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:10.3: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
ACPI: PCI interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 23
eth0: VIA Rhine II at 0xdffffe00, 00:0b:6a:15:06:68, IRQ 23.
eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 41e1.
eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
apm: BIOS not found.
PDC20270: IDE controller at PCI slot 0000:02:01.0
ACPI: PCI interrupt 0000:02:01.0[A] -> GSI 19 (level, low) -> IRQ 19
PDC20270: chipset revision 2
PDC20270: ROM enabled at 0xdfee0000
PDC20270: 100% native mode on irq 19
ide2: BM-DMA at 0xbc00-0xbc07, BIOS settings: hde:pio, hdf:pio
ide3: BM-DMA at 0xbc08-0xbc0f, BIOS settings: hdg:pio, hdh:pio
ACPI: PCI interrupt 0000:02:02.0[A] -> GSI 16 (level, low) -> IRQ 16
ide4: BM-DMA at 0xa800-0xa807, BIOS settings: hdi:pio, hdj:pio
ide5: BM-DMA at 0xa808-0xa80f, BIOS settings: hdk:pio, hdl:pio
Probing IDE interface ide2...
Probing IDE interface ide3...
hdh: IDE DVD-ROM 16X, ATAPI CD/DVD-ROM drive
ide3 at 0xc400-0xc407,0xc002 on irq 19
Probing IDE interface ide4...
Probing IDE interface ide5...
hdk: WDC WD1200BB-00GUA0, ATA DISK drive
ide5 at 0xb000-0xb007,0xac02 on irq 16
hdk: max request size: 1024KiB
irq 19: nobody cared!
[<c0106614>] __report_bad_irq+0x24/0x80
[<c01066f1>] note_interrupt+0x61/0x90
[<c01065bb>] handle_IRQ_event+0x2b/0x60
[<c01069aa>] do_IRQ+0x11a/0x130
[<c0104974>] common_interrupt+0x18/0x20
handlers:
[<c0290d90>] (ide_intr+0x0/0x170)
Disabling IRQ #19

Attachment: pgp00000.pgp
Description: PGP signature