Re: [RFC] New timeofday proposal (v.A1)

[john stultz]

On Thu, 2004-12-09 at 08:57 +0100, Ulrich Windl wrote:
> On 8 Dec 2004 at 15:36, john stultz wrote:
> 
> [...]
> > Take a look at the adjtimex man page as well as the ntp.c file from the
> > timeofday core patch. There are number of different types of adjustments
> > that are made, possibly at the same time. Briefly, they are (to my
> > understanding - I'm going off my notes from awhile ago): 
> > o tick adjustments
> > 	how much time should pass in a _user_ tick
> 
> tick adjustments are considered obsolete, because if a lcok implementation (or 
> hardware) is severly broken, users should reject using that stuff. Meaning: tick 
> adjustments are ment to be set once in the life of a computer system. No 
> continuous tuning.
> 
> > o frequency adjustments
> > 	long term adjustment to correct for constant drift), 
> 
> Actually, you are compensating for a "tick problem" on a smaller scale (constant 
> part), and variations caused by temperature, voltage, and others (variable part).
> 
> > o offset adjustments
> > 	additional ppm adjustment to correct for current offset from the ntp
> > server
> > o single shot offset adjustments 
> > 	old style adjtime functionality
> > 
> > Tick, frequency and offset adjustments can be precalculated and summed
> > to a single ppm adjustment. This is similar to the style of adjustment
> > you propose directly onto the time source frequency values. 
> > 
> > However, there is also this short term single shot adjustments. These
> > adjustments are made by applying the MAX_SINGLESHOT_ADJ (500ppm) scaling
> > for an amount of time (offset_len) which would compensate for the
> > offset. This style is difficult because we cannot precompute it and
> > apply it to an entire tick. Instead it needs to be applied for just a
> > specific amount of time which may be only a fraction of a tick. When we
> 
> Yes, that's the "precise" variant of implementing it. Poor implementations are 
> just accurate to one tick.

Thanks for your knowledgeable clarifications. Its good to know someone
out there deeply understands this stuff more then at a "this is what the
code is doing, and I have my own interpretation as to why" level. :)

thanks again,
-john


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/