-----Message d'origine-----
De : Jeff Garzik [mailto:jgarzik@xxxxxxxxx]
Envoyé : samedi 11 décembre 2004 19:52
À : Alan J. Wylie
Cc : linux-kernel@xxxxxxxxxxxxxxx; EC; Marcelo Tosatti
Objet : Re: 2.4.29-pre1 OOPS early in boot with Intel ICH5 SATA controller
Alan J. Wylie wrote:
Code; c01ccd07 <ata_host_add+57/80>
00000000 <_EIP>:
Code; c01ccd07 <ata_host_add+57/80> <=====
0: ff 50 50 call *0x50(%eax) <=====
Code; c01ccd0a <ata_host_add+5a/80>
3: 89 da mov %ebx,%edx
Code; c01ccd0c <ata_host_add+5c/80>
5: 85 c0 test %eax,%eax
Code; c01ccd0e <ata_host_add+5e/80>
7: 75 12 jne 1b <_EIP+0x1b>
Code; c01ccd10 <ata_host_add+60/80>
9: 8b 5c 24 14 mov 0x14(%esp),%ebx
Code; c01ccd14 <ata_host_add+64/80>
d: 89 d0 mov %edx,%eax
Code; c01ccd16 <ata_host_add+66/80>
f: 8b 74 24 18 mov 0x18(%esp),%esi
Code; c01ccd1a <ata_host_add+6a/80>
13: 8b 00 mov (%eax),%eax
If you are getting an oops there, it looks like your ata_piix driver is
mismatched from the libata core. Did you compile them both at the same
time, from the same source kernel?
The assembly code above is where function ata_host_add in libata-core.c
calls "ap->ops->port_start", which definitely exists in ata_piix.c.
Jeff
After some more testing I made my system work again. With 2.4.27 kernel + patch : SATA Only works fine in BIOS.
With 2.4.28 kerenl, no patch : *Must* put enhanced mode (SATA Only makes
oops).