[PATCH][v3][4/21] Add InfiniBand MAD (management datagram) support (public headers)
From: Roland Dreier
Date: Mon Dec 13 2004 - 13:28:51 EST
Add public headers for handling InfiniBand MADs (management
datagrams), including sending and receiving MADs as well as passing
MADs on to local agents.
Signed-off-by: Roland Dreier <roland@xxxxxxxxxxx>
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ linux-bk/drivers/infiniband/include/ib_mad.h 2004-12-13 09:44:42.628445443 -0800
@@ -0,0 +1,393 @@
+/*
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available at
+ * <http://www.fsf.org/copyleft/gpl.html>, or the OpenIB.org BSD
+ * license, available in the LICENSE.TXT file accompanying this
+ * software. These details are also available at
+ * <http://openib.org/license.html>.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ *
+ * Copyright (c) 2004 Mellanox Technologies Ltd. All rights reserved.
+ * Copyright (c) 2004 Infinicon Corporation. All rights reserved.
+ * Copyright (c) 2004 Intel Corporation. All rights reserved.
+ * Copyright (c) 2004 Topspin Corporation. All rights reserved.
+ * Copyright (c) 2004 Voltaire Corporation. All rights reserved.
+ *
+ * $Id$
+ */
+
+#if !defined( IB_MAD_H )
+#define IB_MAD_H
+
+#include <ib_verbs.h>
+
+/* Management base version */
+#define IB_MGMT_BASE_VERSION 1
+
+/* Management classes */
+#define IB_MGMT_CLASS_SUBN_LID_ROUTED 0x01
+#define IB_MGMT_CLASS_SUBN_DIRECTED_ROUTE 0x81
+#define IB_MGMT_CLASS_SUBN_ADM 0x03
+#define IB_MGMT_CLASS_PERF_MGMT 0x04
+#define IB_MGMT_CLASS_BM 0x05
+#define IB_MGMT_CLASS_DEVICE_MGMT 0x06
+#define IB_MGMT_CLASS_CM 0x07
+#define IB_MGMT_CLASS_SNMP 0x08
+#define IB_MGMT_CLASS_VENDOR_RANGE2_START 0x30
+#define IB_MGMT_CLASS_VENDOR_RANGE2_END 0x4F
+
+/* Management methods */
+#define IB_MGMT_METHOD_GET 0x01
+#define IB_MGMT_METHOD_SET 0x02
+#define IB_MGMT_METHOD_GET_RESP 0x81
+#define IB_MGMT_METHOD_SEND 0x03
+#define IB_MGMT_METHOD_TRAP 0x05
+#define IB_MGMT_METHOD_REPORT 0x06
+#define IB_MGMT_METHOD_REPORT_RESP 0x86
+#define IB_MGMT_METHOD_TRAP_REPRESS 0x07
+
+#define IB_MGMT_METHOD_RESP 0x80
+
+#define IB_MGMT_MAX_METHODS 128
+
+#define IB_QP0 0
+#define IB_QP1 cpu_to_be32(1)
+#define IB_QP1_QKEY 0x80010000
+
+struct ib_grh {
+ u32 version_tclass_flow;
+ u16 paylen;
+ u8 next_hdr;
+ u8 hop_limit;
+ union ib_gid sgid;
+ union ib_gid dgid;
+} __attribute__ ((packed));
+
+struct ib_mad_hdr {
+ u8 base_version;
+ u8 mgmt_class;
+ u8 class_version;
+ u8 method;
+ u16 status;
+ u16 class_specific;
+ u64 tid;
+ u16 attr_id;
+ u16 resv;
+ u32 attr_mod;
+} __attribute__ ((packed));
+
+struct ib_rmpp_hdr {
+ u8 rmpp_version;
+ u8 rmpp_type;
+ u8 rmpp_rtime_flags;
+ u8 rmpp_status;
+ u32 seg_num;
+ u32 paylen_newwin;
+} __attribute__ ((packed));
+
+struct ib_mad {
+ struct ib_mad_hdr mad_hdr;
+ u8 data[232];
+} __attribute__ ((packed));
+
+struct ib_rmpp_mad {
+ struct ib_mad_hdr mad_hdr;
+ struct ib_rmpp_hdr rmpp_hdr;
+ u8 data[220];
+} __attribute__ ((packed));
+
+struct ib_vendor_mad {
+ struct ib_mad_hdr mad_hdr;
+ struct ib_rmpp_hdr rmpp_hdr;
+ u8 reserved;
+ u8 oui[3];
+ u8 data[216];
+} __attribute__ ((packed));
+
+struct ib_mad_agent;
+struct ib_mad_send_wc;
+struct ib_mad_recv_wc;
+
+/**
+ * ib_mad_send_handler - callback handler for a sent MAD.
+ * @mad_agent: MAD agent that sent the MAD.
+ * @mad_send_wc: Send work completion information on the sent MAD.
+ */
+typedef void (*ib_mad_send_handler)(struct ib_mad_agent *mad_agent,
+ struct ib_mad_send_wc *mad_send_wc);
+
+/**
+ * ib_mad_snoop_handler - Callback handler for snooping sent MADs.
+ * @mad_agent: MAD agent that snooped the MAD.
+ * @send_wr: Work request information on the sent MAD.
+ * @mad_send_wc: Work completion information on the sent MAD. Valid
+ * only for snooping that occurs on a send completion.
+ *
+ * Clients snooping MADs should not modify data referenced by the @send_wr
+ * or @mad_send_wc.
+ */
+typedef void (*ib_mad_snoop_handler)(struct ib_mad_agent *mad_agent,
+ struct ib_send_wr *send_wr,
+ struct ib_mad_send_wc *mad_send_wc);
+
+/**
+ * ib_mad_recv_handler - callback handler for a received MAD.
+ * @mad_agent: MAD agent requesting the received MAD.
+ * @mad_recv_wc: Received work completion information on the received MAD.
+ *
+ * MADs received in response to a send request operation will be handed to
+ * the user after the send operation completes. All data buffers given
+ * to registered agents through this routine are owned by the receiving
+ * client, except for snooping agents. Clients snooping MADs should not
+ * modify the data referenced by @mad_recv_wc.
+ */
+typedef void (*ib_mad_recv_handler)(struct ib_mad_agent *mad_agent,
+ struct ib_mad_recv_wc *mad_recv_wc);
+
+/**
+ * ib_mad_agent - Used to track MAD registration with the access layer.
+ * @device: Reference to device registration is on.
+ * @qp: Reference to QP used for sending and receiving MADs.
+ * @recv_handler: Callback handler for a received MAD.
+ * @send_handler: Callback handler for a sent MAD.
+ * @snoop_handler: Callback handler for snooped sent MADs.
+ * @context: User-specified context associated with this registration.
+ * @hi_tid: Access layer assigned transaction ID for this client.
+ * Unsolicited MADs sent by this client will have the upper 32-bits
+ * of their TID set to this value.
+ * @port_num: Port number on which QP is registered
+ */
+struct ib_mad_agent {
+ struct ib_device *device;
+ struct ib_qp *qp;
+ ib_mad_recv_handler recv_handler;
+ ib_mad_send_handler send_handler;
+ ib_mad_snoop_handler snoop_handler;
+ void *context;
+ u32 hi_tid;
+ u8 port_num;
+};
+
+/**
+ * ib_mad_send_wc - MAD send completion information.
+ * @wr_id: Work request identifier associated with the send MAD request.
+ * @status: Completion status.
+ * @vendor_err: Optional vendor error information returned with a failed
+ * request.
+ */
+struct ib_mad_send_wc {
+ u64 wr_id;
+ enum ib_wc_status status;
+ u32 vendor_err;
+};
+
+/**
+ * ib_mad_recv_buf - received MAD buffer information.
+ * @list: Reference to next data buffer for a received RMPP MAD.
+ * @grh: References a data buffer containing the global route header.
+ * The data refereced by this buffer is only valid if the GRH is
+ * valid.
+ * @mad: References the start of the received MAD.
+ */
+struct ib_mad_recv_buf {
+ struct list_head list;
+ struct ib_grh *grh;
+ struct ib_mad *mad;
+};
+
+/**
+ * ib_mad_recv_wc - received MAD information.
+ * @wc: Completion information for the received data.
+ * @recv_buf: Specifies the location of the received data buffer(s).
+ * @mad_len: The length of the received MAD, without duplicated headers.
+ *
+ * For received response, the wr_id field of the wc is set to the wr_id
+ * for the corresponding send request.
+ */
+struct ib_mad_recv_wc {
+ struct ib_wc *wc;
+ struct ib_mad_recv_buf recv_buf;
+ int mad_len;
+};
+
+/**
+ * ib_mad_reg_req - MAD registration request
+ * @mgmt_class: Indicates which management class of MADs should be receive
+ * by the caller. This field is only required if the user wishes to
+ * receive unsolicited MADs, otherwise it should be 0.
+ * @mgmt_class_version: Indicates which version of MADs for the given
+ * management class to receive.
+ * @oui: Indicates IEEE OUI when mgmt_class is a vendor class
+ * in the range from 0x30 to 0x4f. Otherwise not used.
+ * @method_mask: The caller will receive unsolicited MADs for any method
+ * where @method_mask = 1.
+ */
+struct ib_mad_reg_req {
+ u8 mgmt_class;
+ u8 mgmt_class_version;
+ u8 oui[3];
+ DECLARE_BITMAP(method_mask, IB_MGMT_MAX_METHODS);
+};
+
+/**
+ * ib_register_mad_agent - Register to send/receive MADs.
+ * @device: The device to register with.
+ * @port_num: The port on the specified device to use.
+ * @qp_type: Specifies which QP to access. Must be either
+ * IB_QPT_SMI or IB_QPT_GSI.
+ * @mad_reg_req: Specifies which unsolicited MADs should be received
+ * by the caller. This parameter may be NULL if the caller only
+ * wishes to receive solicited responses.
+ * @rmpp_version: If set, indicates that the client will send
+ * and receive MADs that contain the RMPP header for the given version.
+ * If set to 0, indicates that RMPP is not used by this client.
+ * @send_handler: The completion callback routine invoked after a send
+ * request has completed.
+ * @recv_handler: The completion callback routine invoked for a received
+ * MAD.
+ * @context: User specified context associated with the registration.
+ */
+struct ib_mad_agent *ib_register_mad_agent(struct ib_device *device,
+ u8 port_num,
+ enum ib_qp_type qp_type,
+ struct ib_mad_reg_req *mad_reg_req,
+ u8 rmpp_version,
+ ib_mad_send_handler send_handler,
+ ib_mad_recv_handler recv_handler,
+ void *context);
+
+enum ib_mad_snoop_flags {
+ /*IB_MAD_SNOOP_POSTED_SENDS = 1,*/
+ /*IB_MAD_SNOOP_RMPP_SENDS = (1<<1),*/
+ IB_MAD_SNOOP_SEND_COMPLETIONS = (1<<2),
+ /*IB_MAD_SNOOP_RMPP_SEND_COMPLETIONS = (1<<3),*/
+ IB_MAD_SNOOP_RECVS = (1<<4)
+ /*IB_MAD_SNOOP_RMPP_RECVS = (1<<5),*/
+ /*IB_MAD_SNOOP_REDIRECTED_QPS = (1<<6)*/
+};
+
+/**
+ * ib_register_mad_snoop - Register to snoop sent and received MADs.
+ * @device: The device to register with.
+ * @port_num: The port on the specified device to use.
+ * @qp_type: Specifies which QP traffic to snoop. Must be either
+ * IB_QPT_SMI or IB_QPT_GSI.
+ * @mad_snoop_flags: Specifies information where snooping occurs.
+ * @send_handler: The callback routine invoked for a snooped send.
+ * @recv_handler: The callback routine invoked for a snooped receive.
+ * @context: User specified context associated with the registration.
+ */
+struct ib_mad_agent *ib_register_mad_snoop(struct ib_device *device,
+ u8 port_num,
+ enum ib_qp_type qp_type,
+ int mad_snoop_flags,
+ ib_mad_snoop_handler snoop_handler,
+ ib_mad_recv_handler recv_handler,
+ void *context);
+
+/**
+ * ib_unregister_mad_agent - Unregisters a client from using MAD services.
+ * @mad_agent: Corresponding MAD registration request to deregister.
+ *
+ * After invoking this routine, MAD services are no longer usable by the
+ * client on the associated QP.
+ */
+int ib_unregister_mad_agent(struct ib_mad_agent *mad_agent);
+
+/**
+ * ib_post_send_mad - Posts MAD(s) to the send queue of the QP associated
+ * with the registered client.
+ * @mad_agent: Specifies the associated registration to post the send to.
+ * @send_wr: Specifies the information needed to send the MAD(s).
+ * @bad_send_wr: Specifies the MAD on which an error was encountered.
+ *
+ * Sent MADs are not guaranteed to complete in the order that they were posted.
+ */
+int ib_post_send_mad(struct ib_mad_agent *mad_agent,
+ struct ib_send_wr *send_wr,
+ struct ib_send_wr **bad_send_wr);
+
+/**
+ * ib_coalesce_recv_mad - Coalesces received MAD data into a single buffer.
+ * @mad_recv_wc: Work completion information for a received MAD.
+ * @buf: User-provided data buffer to receive the coalesced buffers. The
+ * referenced buffer should be at least the size of the mad_len specified
+ * by @mad_recv_wc.
+ *
+ * This call copies a chain of received RMPP MADs into a single data buffer,
+ * removing duplicated headers.
+ */
+void ib_coalesce_recv_mad(struct ib_mad_recv_wc *mad_recv_wc,
+ void *buf);
+
+/**
+ * ib_free_recv_mad - Returns data buffers used to receive a MAD to the
+ * access layer.
+ * @mad_recv_wc: Work completion information for a received MAD.
+ *
+ * Clients receiving MADs through their ib_mad_recv_handler must call this
+ * routine to return the work completion buffers to the access layer.
+ */
+void ib_free_recv_mad(struct ib_mad_recv_wc *mad_recv_wc);
+
+/**
+ * ib_cancel_mad - Cancels an outstanding send MAD operation.
+ * @mad_agent: Specifies the registration associated with sent MAD.
+ * @wr_id: Indicates the work request identifier of the MAD to cancel.
+ *
+ * MADs will be returned to the user through the corresponding
+ * ib_mad_send_handler.
+ */
+void ib_cancel_mad(struct ib_mad_agent *mad_agent,
+ u64 wr_id);
+
+/**
+ * ib_redirect_mad_qp - Registers a QP for MAD services.
+ * @qp: Reference to a QP that requires MAD services.
+ * @rmpp_version: If set, indicates that the client will send
+ * and receive MADs that contain the RMPP header for the given version.
+ * If set to 0, indicates that RMPP is not used by this client.
+ * @send_handler: The completion callback routine invoked after a send
+ * request has completed.
+ * @recv_handler: The completion callback routine invoked for a received
+ * MAD.
+ * @context: User specified context associated with the registration.
+ *
+ * Use of this call allows clients to use MAD services, such as RMPP,
+ * on user-owned QPs. After calling this routine, users may send
+ * MADs on the specified QP by calling ib_mad_post_send.
+ */
+struct ib_mad_agent *ib_redirect_mad_qp(struct ib_qp *qp,
+ u8 rmpp_version,
+ ib_mad_send_handler send_handler,
+ ib_mad_recv_handler recv_handler,
+ void *context);
+
+/**
+ * ib_process_mad_wc - Processes a work completion associated with a
+ * MAD sent or received on a redirected QP.
+ * @mad_agent: Specifies the registered MAD service using the redirected QP.
+ * @wc: References a work completion associated with a sent or received
+ * MAD segment.
+ *
+ * This routine is used to complete or continue processing on a MAD request.
+ * If the work completion is associated with a send operation, calling
+ * this routine is required to continue an RMPP transfer or to wait for a
+ * corresponding response, if it is a request. If the work completion is
+ * associated with a receive operation, calling this routine is required to
+ * process an inbound or outbound RMPP transfer, or to match a response MAD
+ * with its corresponding request.
+ */
+int ib_process_mad_wc(struct ib_mad_agent *mad_agent,
+ struct ib_wc *wc);
+
+#endif /* IB_MAD_H */
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ linux-bk/drivers/infiniband/include/ib_smi.h 2004-12-13 09:44:42.653441760 -0800
@@ -0,0 +1,67 @@
+/*
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available at
+ * <http://www.fsf.org/copyleft/gpl.html>, or the OpenIB.org BSD
+ * license, available in the LICENSE.TXT file accompanying this
+ * software. These details are also available at
+ * <http://openib.org/license.html>.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ *
+ * Copyright (c) 2004 Mellanox Technologies Ltd. All rights reserved.
+ * Copyright (c) 2004 Infinicon Corporation. All rights reserved.
+ * Copyright (c) 2004 Intel Corporation. All rights reserved.
+ * Copyright (c) 2004 Topspin Corporation. All rights reserved.
+ * Copyright (c) 2004 Voltaire Corporation. All rights reserved.
+ *
+ * $Id$
+ */
+
+#if !defined( IB_SMI_H )
+#define IB_SMI_H
+
+#include <ib_mad.h>
+
+#define IB_LID_PERMISSIVE 0xFFFF
+
+#define IB_SMP_DATA_SIZE 64
+#define IB_SMP_MAX_PATH_HOPS 64
+
+struct ib_smp {
+ u8 base_version;
+ u8 mgmt_class;
+ u8 class_version;
+ u8 method;
+ u16 status;
+ u8 hop_ptr;
+ u8 hop_cnt;
+ u64 tid;
+ u16 attr_id;
+ u16 resv;
+ u32 attr_mod;
+ u64 mkey;
+ u16 dr_slid;
+ u16 dr_dlid;
+ u8 reserved[28];
+ u8 data[IB_SMP_DATA_SIZE];
+ u8 initial_path[IB_SMP_MAX_PATH_HOPS];
+ u8 return_path[IB_SMP_MAX_PATH_HOPS];
+} __attribute__ ((packed));
+
+#define IB_SMP_DIRECTION cpu_to_be16(0x8000)
+
+static inline u8
+ib_get_smp_direction(struct ib_smp *smp)
+{
+ return ((smp->status & IB_SMP_DIRECTION) == IB_SMP_DIRECTION);
+}
+
+#endif /* IB_SMI_H */
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/