[PATCH]PCI Express Port Bus Driver
From: long
Date: Wed Dec 15 2004 - 16:30:48 EST
A PCI Express Port is a logical PCI-PCI Bridge structure. There
are two types of PCI Express Port: the Root Port and the Switch
Port. A PCI Express Port can provide up to four distinct services,
depending on its port type. These services include native hotplug
support, power management event support, advanced error reporting
support, and virtual channel support.
In existing Linux kernels, the Linux Device Driver Model allows a
physical device to be handled by only a single driver. The PCI
Express Port is a PCI-PCI Bridge device with multiple distinct
services. To maintain a clean and simple solution each service
may have its own software service driver. In this case several
service drivers will compete for a single PCI-PCI Bridge device.
For example, if the PCI Express Root Port native hotplug service
driver is loaded first, it claims a PCI-PCI Bridge Root Port. The
kernel therefore does not load other service drivers for that Root
Port. In other words, it is impossible to have multiple service
drivers loaded and run on a PCI-PCI Bridge device simultaneously
using the current driver model.
To enable multiple service drivers running simultaneously requires
having a PCI Express Port Bus driver, which manages all populated
PCI Express Ports and distributes all provided service requests
to the corresponding service drivers as required.
This patch, which is based on linux kernel 2.6.10-rc3, includes the
followings:
- PCI Express Port Bus driver source
- Modification of PCI Express Native Hot-Plug driver to support PCI
Express Port Bus Model
- PCIEBUS-HOWTO.txt
Please send us any suggestions, feedback, comments or alternative
designs.
Signed-off-by: T. Long Nguyen <tom.l.nguyen@xxxxxxxxx>
--------------------------------------------------------------------
diff -urpN linux-2.6.10-rc3/arch/i386/Kconfig patch-2.6.10-rc3-pbdhp/arch/i386/Kconfig
--- linux-2.6.10-rc3/arch/i386/Kconfig 2004-12-03 16:52:47.000000000 -0500
+++ patch-2.6.10-rc3-pbdhp/arch/i386/Kconfig 2004-12-10 14:06:05.000000000 -0500
@@ -1117,6 +1117,8 @@ config PCI_MMCONFIG
select ACPI_BOOT
default y
+source "drivers/pcieport/Kconfig"
+
source "drivers/pci/Kconfig"
config ISA
diff -urpN linux-2.6.10-rc3/Documentation/PCIEBUS-HOWTO.txt patch-2.6.10-rc3-pbdhp/Documentation/PCIEBUS-HOWTO.txt
--- linux-2.6.10-rc3/Documentation/PCIEBUS-HOWTO.txt 1969-12-31 19:00:00.000000000 -0500
+++ patch-2.6.10-rc3-pbdhp/Documentation/PCIEBUS-HOWTO.txt 2004-12-10 14:06:05.000000000 -0500
@@ -0,0 +1,217 @@
+ The PCI Express Port Bus Driver Guide HOWTO
+ Tom L Nguyen tom.l.nguyen@xxxxxxxxx
+ 11/03/2004
+
+1. About this guide
+
+This guide describes the basics of the PCI Express Port Bus driver
+and provides information on how to enable the service drivers to
+register/unregister with the PCI Express Port Bus Driver.
+
+2. Copyright 2004 Intel Corporation
+
+3. What is the PCI Express Port Bus Driver
+
+A PCI Express Port is a logical PCI-PCI Bridge structure. There
+are two types of PCI Express Port: the Root Port and the Switch
+Port. The Root Port originates a PCI Express link from a PCI Express
+Root Complex and the Switch Port connects PCI Express links to
+internal logical PCI buses. The Switch Port, which has its secondary
+bus representing the switch's internal routing logic, is called the
+switch's Upstream Port. The switch's Downstream Port is bridging from
+switch's internal routing bus to a bus representing the downstream
+PCI Express link from the PCI Express Switch.
+
+A PCI Express Port can provide up to four distinct functions,
+referred to in this document as services, depending on its port type.
+PCI Express Port's services include native hotplug support (HP),
+power management event support (PME), advanced error reporting
+support (AER), and virtual channel support (VC). These services may
+be handled by a single complex driver or be individually distributed
+and handled by corresponding service drivers.
+
+4. Why use the PCI Express Port Bus Driver?
+
+In existing Linux kernels, the Linux Device Driver Model allows a
+physical device to be handled by only a single driver. The PCI
+Express Port is a PCI-PCI Bridge device with multiple distinct
+services. To maintain a clean and simple solution each service
+may have its own software service driver. In this case several
+service drivers will compete for a single PCI-PCI Bridge device.
+For example, if the PCI Express Root Port native hotplug service
+driver is loaded first, it claims a PCI-PCI Bridge Root Port. The
+kernel therefore does not load other service drivers for that Root
+Port. In other words, it is impossible to have multiple service
+drivers load and run on a PCI-PCI Bridge device simultaneously
+using the current driver model.
+
+To enable multiple service drivers running simultaneously requires
+having a PCI Express Port Bus driver, which manages all populated
+PCI Express Ports and distributes all provided service requests
+to the corresponding service drivers as required. Some key
+advantages of using the PCI Express Port Bus driver are listed below:
+
+ - Allow multiple service drivers to run simultaneously on
+ a PCI-PCI Bridge Port device.
+
+ - Allow service drivers implemented in an independent
+ staged approach.
+
+ - Allow one service driver to run on multiple PCI-PCI Bridge
+ Port devices.
+
+ - Manage and distribute resources of a PCI-PCI Bridge Port
+ device to requested service drivers.
+
+5. Configuring the PCI Express Port Bus Driver vs. Service Drivers
+
+5.1 Including the PCI Express Port Bus Driver Support into the Kernel
+
+Including the PCI Express Port Bus driver depends on whether the PCI
+Express support is included in the kernel config. The kernel will
+automatically include the PCI Express Port Bus driver as a kernel
+driver when the PCI Express support is enabled in the kernel.
+
+5.2 Enabling Service Driver Support
+
+PCI device drivers are implemented based on Linux Device Driver Model.
+All service drivers are PCI device drivers. As discussed above, it is
+impossible to load any service driver once the kernel has loaded the
+PCI Express Port Bus Driver. To meet the PCI Express Port Bus Driver
+Model requires some minimal changes on existing service drivers that
+imposes no impact on the functionality of existing service drivers.
+
+A service driver is required to use the two APIs shown below to
+register its service with the PCI Express Port Bus driver (see
+section 5.2.1 & 5.2.2). It is important that a service driver
+initializes the pcie_port_service_driver data structure, included in
+header file /include/linux/pcieport_if.h, before calling these APIs.
+Failure to do so will result an identity mismatch, which prevents
+the PCI Express Port Bus driver from loading a service driver.
+
+5.2.1 pcie_port_service_register
+
+int pcie_port_service_register(struct pcie_port_service_driver *new)
+
+This API replaces the Linux Driver Model's pci_module_init API. A
+service driver should always calls pcie_port_service_register at
+module init. Note that after service driver being loaded, calls
+such as pci_enable_device(dev) and pci_set_master(dev) are no longer
+necessary since these calls are executed by the PCI Port Bus driver.
+
+5.2.2 pcie_port_service_unregister
+
+void pcie_port_service_unregister(struct pcie_port_service_driver *new)
+
+pcie_port_service_unregister replaces the Linux Driver Model's
+pci_unregister_driver. It's always called by service driver when a
+module exits.
+
+5.2.3 Sample Code
+
+Below is sample service driver code to initialize the port service
+driver data structure.
+
+static struct pcie_port_service_id service_id[] = { {
+ .vendor = PCI_ANY_ID,
+ .device = PCI_ANY_ID,
+ .port_type = PCIE_RC_PORT,
+ .service_type = PCIE_PORT_SERVICE_AER,
+ }, { /* end: all zeroes */ }
+};
+
+static struct pcie_port_service_driver root_aerdrv = {
+ .name = (char *)device_name,
+ .id_table = &service_id[0],
+
+ .probe = aerdrv_load,
+ .remove = aerdrv_unload,
+
+ .suspend = aerdrv_suspend,
+ .resume = aerdrv_resume,
+};
+
+Below is a sample code for registering/unregistering a service
+driver.
+
+static int __init aerdrv_service_init(void)
+{
+ int retval = 0;
+
+ retval = pcie_port_service_register(&root_aerdrv);
+ if (!retval) {
+ /*
+ * FIX ME
+ */
+ }
+ return retval;
+}
+
+static void __exit aerdrv_service_exit(void)
+{
+ pcie_port_service_unregister(&root_aerdrv);
+}
+
+module_init(aerdrv_service_init);
+module_exit(aerdrv_service_exit);
+
+6. Possible Resource Conflicts
+
+Since all service drivers of a PCI-PCI Bridge Port device are
+allowed to run simultaneously, below lists a few of possible resource
+conflicts with proposed solutions.
+
+6.1 MSI Vector Resource
+
+The MSI capability structure enables a device software driver to call
+pci_enable_msi to request MSI based interrupts. Once MSI interrupts
+are enabled on a device, it stays in this mode until a device driver
+calls pci_disable_msi to disable MSI interrupts and revert back to
+INTx emulation mode. Since service drivers of the same PCI-PCI Bridge
+port share the same physical device, if an individual service driver
+calls pci_enable_msi/pci_disable_msi it may result unpredictable
+behavior. For example, two service drivers run simultaneously on the
+same physical Root Port. Both service drivers call pci_enable_msi to
+request MSI based interrupts. A service driver may not know whether
+any other service drivers have run on this Root Port. If either one
+of them calls pci_disable_msi, it puts the other service driver
+in a wrong interrupt mode.
+
+To avoid this situation all service drivers are not permitted to
+switch interrupt mode on its device. The PCI Express Port Bus driver
+is responsible for determining the interrupt mode and this should be
+transparent to service drivers. Service drivers need to know only
+the vector IRQ assigned to the field irq of struct pcie_device, which
+is passed in when the PCI Express Port Bus driver probes each service
+driver. Service drivers should use (struct pcie_device*)dev->irq to
+call request_irq/free_irq. In addition, the interrupt mode is stored
+in the field interrupt_mode of struct pcie_device.
+
+6.2 MSI-X Vector Resources
+
+Similar to the MSI a device driver for an MSI-X capable device can
+call pci_enable_msix to request MSI-X interrupts. All service drivers
+are not permitted to switch interrupt mode on its device. The PCI
+Express Port Bus driver is responsible for determining the interrupt
+mode and this should be transparent to service drivers. Any attempt
+by service driver to call pci_enable_msix/pci_disable_msix may
+result unpredictable behavior. Service drivers should use
+(struct pcie_device*)dev->irq and call request_irq/free_irq.
+
+6.3 PCI Memory/IO Mapped Regions
+
+Service drivers for PCI Express Power Management (PME), Advanced
+Error Reporting (AER), Hot-Plug (HP) and Virtual Channel (VC) access
+PCI configuration space on the PCI Express port. In all cases the
+registers accessed are independent of each other. This patch assumes
+that all service drivers will be well behaved and not overwrite
+other service driver's configuration settings.
+
+6.4 PCI Config Registers
+
+Each service driver runs its PCI config operations on its own
+capability structure except the PCI Express capability structure, in
+which Root Control register and Device Control register are shared
+between PME and AER. This patch assumes that all service drivers
+will be well behaved and not overwrite other service driver's
+configuration settings.
diff -urpN linux-2.6.10-rc3/drivers/Makefile patch-2.6.10-rc3-pbdhp/drivers/Makefile
--- linux-2.6.10-rc3/drivers/Makefile 2004-12-03 16:55:13.000000000 -0500
+++ patch-2.6.10-rc3-pbdhp/drivers/Makefile 2004-12-10 14:06:05.000000000 -0500
@@ -54,6 +54,7 @@ obj-$(CONFIG_W1) += w1/
obj-$(CONFIG_PHONE) += telephony/
obj-$(CONFIG_MD) += md/
obj-$(CONFIG_BT) += bluetooth/
+obj-$(CONFIG_PCIEPORTBUS) += pcieport/
obj-$(CONFIG_ISDN) += isdn/
obj-$(CONFIG_MCA) += mca/
obj-$(CONFIG_EISA) += eisa/
diff -urpN linux-2.6.10-rc3/drivers/pci/hotplug/Kconfig patch-2.6.10-rc3-pbdhp/drivers/pci/hotplug/Kconfig
--- linux-2.6.10-rc3/drivers/pci/hotplug/Kconfig 2004-12-03 16:55:13.000000000 -0500
+++ patch-2.6.10-rc3-pbdhp/drivers/pci/hotplug/Kconfig 2004-12-10 14:06:05.000000000 -0500
@@ -134,27 +134,6 @@ config HOTPLUG_PCI_CPCI_GENERIC
When in doubt, say N.
-config HOTPLUG_PCI_PCIE
- tristate "PCI Express Hotplug driver"
- depends on HOTPLUG_PCI
- help
- Say Y here if you have a motherboard that supports PCI Express Native
- Hotplug
-
- To compile this driver as a module, choose M here: the
- module will be called pciehp.
-
- When in doubt, say N.
-
-config HOTPLUG_PCI_PCIE_POLL_EVENT_MODE
- bool "Use polling mechanism for hot-plug events (for testing purpose)"
- depends on HOTPLUG_PCI_PCIE
- help
- Say Y here if you want to use the polling mechanism for hot-plug
- events for early platform testing.
-
- When in doubt, say N.
-
config HOTPLUG_PCI_SHPC
tristate "SHPC PCI Hotplug driver"
depends on HOTPLUG_PCI
diff -urpN linux-2.6.10-rc3/drivers/pci/hotplug/pciehp_core.c patch-2.6.10-rc3-pbdhp/drivers/pci/hotplug/pciehp_core.c
--- linux-2.6.10-rc3/drivers/pci/hotplug/pciehp_core.c 2004-12-03 16:55:12.000000000 -0500
+++ patch-2.6.10-rc3-pbdhp/drivers/pci/hotplug/pciehp_core.c 2004-12-10 14:06:05.000000000 -0500
@@ -41,6 +41,7 @@
#include <asm/uaccess.h>
#include "pciehp.h"
#include "pciehprm.h"
+#include <linux/interrupt.h>
/* Global variables */
int pciehp_debug;
@@ -347,7 +348,7 @@ static int get_cur_bus_speed(struct hotp
return 0;
}
-static int pcie_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+static int pciehp_probe(struct pcie_device *dev, const struct pcie_port_service_id *id)
{
int rc;
struct controller *ctrl;
@@ -355,7 +356,9 @@ static int pcie_probe(struct pci_dev *pd
int first_device_num = 0 ; /* first PCI device number supported by this PCIE */
int num_ctlr_slots; /* number of slots supported by this HPC */
u8 value;
-
+ struct pci_dev *pdev;
+
+ dbg("%s: Called by hp_drv\n", __FUNCTION__);
ctrl = kmalloc(sizeof(*ctrl), GFP_KERNEL);
if (!ctrl) {
err("%s : out of memory\n", __FUNCTION__);
@@ -364,8 +367,10 @@ static int pcie_probe(struct pci_dev *pd
memset(ctrl, 0, sizeof(struct controller));
dbg("%s: DRV_thread pid = %d\n", __FUNCTION__, current->pid);
+
+ pdev = dev->port;
- rc = pcie_init(ctrl, pdev,
+ rc = pcie_init(ctrl, dev,
(php_intr_callback_t) pciehp_handle_attention_button,
(php_intr_callback_t) pciehp_handle_switch_change,
(php_intr_callback_t) pciehp_handle_presence_change,
@@ -563,32 +568,52 @@ static void __exit unload_pciehpd(void)
}
+int hpdriver_context = 0;
-static struct pci_device_id pcied_pci_tbl[] = {
- {
- .class = ((PCI_CLASS_BRIDGE_PCI << 8) | 0x00),
- .class_mask = ~0,
- .vendor = PCI_ANY_ID,
- .device = PCI_ANY_ID,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- },
-
- { /* end: all zeroes */ }
-};
-
-MODULE_DEVICE_TABLE(pci, pcied_pci_tbl);
+static void pciehp_remove (struct pcie_device *device)
+{
+ printk("%s ENTRY\n", __FUNCTION__);
+ printk("%s -> Call free_irq for irq = %d\n",
+ __FUNCTION__, device->irq);
+ free_irq(device->irq, &hpdriver_context);
+}
+#ifdef CONFIG_PM
+static int pciehp_suspend (struct pcie_device *dev, u32 state)
+{
+ printk("%s ENTRY\n", __FUNCTION__);
+ return 0;
+}
+static int pciehp_resume (struct pcie_device *dev)
+{
+ printk("%s ENTRY\n", __FUNCTION__);
+ return 0;
+}
+#endif
-static struct pci_driver pcie_driver = {
- .name = PCIE_MODULE_NAME,
- .id_table = pcied_pci_tbl,
- .probe = pcie_probe,
- /* remove: pcie_remove_one, */
+static struct pcie_port_service_id port_pci_ids[] = { {
+ .vendor = PCI_ANY_ID,
+ .device = PCI_ANY_ID,
+ .port_type = PCIE_RC_PORT,
+ .service_type = PCIE_PORT_SERVICE_HP,
+ .driver_data = 0,
+ }, { /* end: all zeroes */ }
};
+static const char device_name[] = "hpdriver";
-
+static struct pcie_port_service_driver hpdriver_portdrv = {
+ .name = (char *)device_name,
+ .id_table = &port_pci_ids[0],
+
+ .probe = pciehp_probe,
+ .remove = pciehp_remove,
+
+#ifdef CONFIG_PM
+ .suspend = pciehp_suspend,
+ .resume = pciehp_resume,
+#endif /* PM */
+};
static int __init pcied_init(void)
{
@@ -604,9 +629,11 @@ static int __init pcied_init(void)
retval = pciehprm_init(PCI);
if (!retval) {
- retval = pci_register_driver(&pcie_driver);
- dbg("pci_register_driver = %d\n", retval);
- info(DRIVER_DESC " version: " DRIVER_VERSION "\n");
+ retval = pcie_port_service_register(&hpdriver_portdrv);
+ dbg("pcie_port_service_register = %d\n", retval);
+ info(DRIVER_DESC " version: " DRIVER_VERSION "\n");
+ if (retval)
+ dbg("%s: Failure to register service\n", __FUNCTION__);
}
error_hpc_init:
@@ -626,8 +653,8 @@ static void __exit pcied_cleanup(void)
pciehprm_cleanup();
- dbg("pci_unregister_driver\n");
- pci_unregister_driver(&pcie_driver);
+ dbg("pcie_port_service_unregister\n");
+ pcie_port_service_unregister(&hpdriver_portdrv);
info(DRIVER_DESC " version: " DRIVER_VERSION " unloaded\n");
}
diff -urpN linux-2.6.10-rc3/drivers/pci/hotplug/pciehp.h patch-2.6.10-rc3-pbdhp/drivers/pci/hotplug/pciehp.h
--- linux-2.6.10-rc3/drivers/pci/hotplug/pciehp.h 2004-12-03 16:54:16.000000000 -0500
+++ patch-2.6.10-rc3-pbdhp/drivers/pci/hotplug/pciehp.h 2004-12-10 14:06:05.000000000 -0500
@@ -34,6 +34,7 @@
#include <linux/delay.h>
#include <asm/semaphore.h>
#include <asm/io.h>
+#include <linux/pcieport_if.h>
#include "pci_hotplug.h"
#define MY_NAME "pciehp"
@@ -311,7 +312,7 @@ enum php_ctlr_type {
typedef u8(*php_intr_callback_t) (unsigned int change_id, void *instance_id);
-int pcie_init(struct controller *ctrl, struct pci_dev *pdev,
+int pcie_init(struct controller *ctrl, struct pcie_device *dev,
php_intr_callback_t attention_button_callback,
php_intr_callback_t switch_change_callback,
php_intr_callback_t presence_change_callback,
diff -urpN linux-2.6.10-rc3/drivers/pci/hotplug/pciehp_hpc.c patch-2.6.10-rc3-pbdhp/drivers/pci/hotplug/pciehp_hpc.c
--- linux-2.6.10-rc3/drivers/pci/hotplug/pciehp_hpc.c 2004-12-03 16:53:57.000000000 -0500
+++ patch-2.6.10-rc3-pbdhp/drivers/pci/hotplug/pciehp_hpc.c 2004-12-10 14:06:05.000000000 -0500
@@ -1249,7 +1249,7 @@ static struct hpc_ops pciehp_hpc_ops = {
};
int pcie_init(struct controller * ctrl,
- struct pci_dev *pdev,
+ struct pcie_device *dev,
php_intr_callback_t attention_button_callback,
php_intr_callback_t switch_change_callback,
php_intr_callback_t presence_change_callback,
@@ -1265,6 +1265,7 @@ int pcie_init(struct controller * ctrl,
u32 slot_cap;
int cap_base, saved_cap_base;
u16 slot_status, slot_ctrl;
+ struct pci_dev *pdev;
DBG_ENTER_ROUTINE
@@ -1277,7 +1278,8 @@ int pcie_init(struct controller * ctrl,
}
memset(php_ctlr, 0, sizeof(struct php_ctlr_state_s));
-
+
+ pdev = dev->port;
php_ctlr->pci_dev = pdev; /* save pci_dev in context */
dbg("%s: pdev->vendor %x pdev->device %x\n", __FUNCTION__,
@@ -1338,7 +1340,7 @@ int pcie_init(struct controller * ctrl,
}
dbg("pdev = %p: b:d:f:irq=0x%x:%x:%x:%x\n", pdev, pdev->bus->number,
- PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn), pdev->irq);
+ PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn), dev->irq);
for ( rc = 0; rc < DEVICE_COUNT_RESOURCE; rc++)
if (pci_resource_len(pdev, rc) > 0)
dbg("pci resource[%d] start=0x%lx(len=0x%lx)\n", rc,
@@ -1355,7 +1357,7 @@ int pcie_init(struct controller * ctrl,
init_waitqueue_head(&ctrl->queue);
/* find the IRQ */
- php_ctlr->irq = pdev->irq;
+ php_ctlr->irq = dev->irq;
dbg("HPC interrupt = %d\n", php_ctlr->irq);
/* Save interrupt callback info */
@@ -1407,17 +1409,6 @@ int pcie_init(struct controller * ctrl,
start_int_poll_timer( php_ctlr, 10 ); /* start with 10 second delay */
} else {
/* Installs the interrupt handler */
- dbg("%s: pcie_mch_quirk = %x\n", __FUNCTION__, pcie_mch_quirk);
- if (!pcie_mch_quirk) {
- rc = pci_enable_msi(pdev);
- if (rc) {
- info("Can't get msi for the hotplug controller\n");
- info("Use INTx for the hotplug controller\n");
- dbg("%s: rc = %x\n", __FUNCTION__, rc);
- } else
- php_ctlr->irq = pdev->irq;
- }
-
rc = request_irq(php_ctlr->irq, pcie_isr, SA_SHIRQ, MY_NAME, (void *) ctrl);
dbg("%s: request_irq %d for hpc%d (returns %d)\n", __FUNCTION__, php_ctlr->irq, ctlr_seq_num, rc);
if (rc) {
diff -urpN linux-2.6.10-rc3/drivers/pcieport/Kconfig patch-2.6.10-rc3-pbdhp/drivers/pcieport/Kconfig
--- linux-2.6.10-rc3/drivers/pcieport/Kconfig 1969-12-31 19:00:00.000000000 -0500
+++ patch-2.6.10-rc3-pbdhp/drivers/pcieport/Kconfig 2004-12-10 14:06:05.000000000 -0500
@@ -0,0 +1,38 @@
+#
+# PCI Express Port Bus Configuration
+#
+config PCIEPORTBUS
+ bool "PCI Express support"
+ depends on PCI_GOMMCONFIG
+ default n
+
+ ---help---
+ This automatically enables PCI Express Port Bus support. Users can
+ choose Native Hot-Plug support, Advanced Error Reporting support,
+ Power Management Event support and Virtual Channel support to run
+ on PCI Express Ports (Root or Switch).
+
+#
+# Include service Kconfig here
+#
+config HOTPLUG_PCI_PCIE
+ tristate "PCI Express Hotplug driver"
+ depends on HOTPLUG_PCI && PCIEPORTBUS
+ help
+ Say Y here if you have a motherboard that supports PCI Express Native
+ Hotplug
+
+ To compile this driver as a module, choose M here: the
+ module will be called pciehp.
+
+ When in doubt, say N.
+
+config HOTPLUG_PCI_PCIE_POLL_EVENT_MODE
+ bool "Use polling mechanism for hot-plug events (for testing purpose)"
+ depends on HOTPLUG_PCI_PCIE
+ help
+ Say Y here if you want to use the polling mechanism for hot-plug
+ events for early platform testing.
+
+ When in doubt, say N.
+
diff -urpN linux-2.6.10-rc3/drivers/pcieport/Makefile patch-2.6.10-rc3-pbdhp/drivers/pcieport/Makefile
--- linux-2.6.10-rc3/drivers/pcieport/Makefile 1969-12-31 19:00:00.000000000 -0500
+++ patch-2.6.10-rc3-pbdhp/drivers/pcieport/Makefile 2004-12-10 14:06:05.000000000 -0500
@@ -0,0 +1,7 @@
+#
+# Makefile for PCI-Express PORT Driver
+#
+
+pcieportdrv-y := portdrv_core.o portdrv_pci.o portdrv_bus.o
+
+obj-$(CONFIG_PCIEPORTBUS) += pcieportdrv.o
diff -urpN linux-2.6.10-rc3/drivers/pcieport/portdrv_bus.c patch-2.6.10-rc3-pbdhp/drivers/pcieport/portdrv_bus.c
--- linux-2.6.10-rc3/drivers/pcieport/portdrv_bus.c 1969-12-31 19:00:00.000000000 -0500
+++ patch-2.6.10-rc3-pbdhp/drivers/pcieport/portdrv_bus.c 2004-12-10 15:14:46.000000000 -0500
@@ -0,0 +1,88 @@
+/*
+ * File: portdrv_bus.c
+ * Purpose: PCI Express Port Bus Driver's Bus Overloading Functions
+ *
+ * Copyright (C) 2004 Intel
+ * Copyright (C) Tom Long Nguyen (tom.l.nguyen@xxxxxxxxx)
+ */
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/pm.h>
+
+#include <linux/pcieport_if.h>
+
+static int generic_probe (struct device *dev) { return 0;}
+static int generic_remove (struct device *dev) { return 0;}
+static int pcie_port_bus_match(struct device *dev, struct device_driver *drv);
+static int pcie_port_bus_suspend(struct device *dev, u32 state);
+static int pcie_port_bus_resume(struct device *dev);
+
+struct bus_type pcie_port_bus_type = {
+ .name = "PCIE port bus",
+ .match = pcie_port_bus_match,
+ .suspend = pcie_port_bus_suspend,
+ .resume = pcie_port_bus_resume,
+};
+
+struct device_driver pcieport_generic_driver = {
+ .name = "pcieport",
+ .bus = &pcie_port_bus_type,
+ .probe = generic_probe,
+ .remove = generic_remove,
+};
+
+static int pcie_port_bus_match(struct device *dev, struct device_driver *drv)
+{
+ struct pcie_device *pciedev;
+ struct pcie_port_service_driver *driver;
+
+ if ( drv->bus != &pcie_port_bus_type ||
+ dev->bus != &pcie_port_bus_type ||
+ drv == &pcieport_generic_driver) {
+ return 0;
+ }
+ pciedev = to_pcie_device(dev);
+ driver = to_service_driver(drv);
+ if ( (driver->id_table->vendor != PCI_ANY_ID &&
+ driver->id_table->vendor != pciedev->id.vendor) ||
+ (driver->id_table->device != PCI_ANY_ID &&
+ driver->id_table->device != pciedev->id.device) ||
+ driver->id_table->port_type != pciedev->id.port_type ||
+ driver->id_table->service_type != pciedev->id.service_type )
+ return 0;
+
+ return 1;
+}
+
+static int pcie_port_bus_suspend(struct device *dev, u32 state)
+{
+ struct pcie_device *pciedev;
+ struct pcie_port_service_driver *driver;
+
+ if (!dev || !dev->driver)
+ return 0;
+
+ pciedev = to_pcie_device(dev);
+ driver = to_service_driver(dev->driver);
+ if (driver && driver->suspend)
+ driver->suspend(pciedev, state);
+ return 0;
+}
+
+static int pcie_port_bus_resume(struct device *dev)
+{
+ struct pcie_device *pciedev;
+ struct pcie_port_service_driver *driver;
+
+ if (!dev || !dev->driver)
+ return 0;
+
+ pciedev = to_pcie_device(dev);
+ driver = to_service_driver(dev->driver);
+ if (driver && driver->resume)
+ driver->resume(pciedev);
+ return 0;
+}
diff -urpN linux-2.6.10-rc3/drivers/pcieport/portdrv_core.c patch-2.6.10-rc3-pbdhp/drivers/pcieport/portdrv_core.c
--- linux-2.6.10-rc3/drivers/pcieport/portdrv_core.c 1969-12-31 19:00:00.000000000 -0500
+++ patch-2.6.10-rc3-pbdhp/drivers/pcieport/portdrv_core.c 2004-12-10 15:32:48.000000000 -0500
@@ -0,0 +1,453 @@
+/*
+ * File: portdrv_core.c
+ * Purpose: PCI Express Port Bus Driver's Core Functions
+ *
+ * Copyright (C) 2004 Intel
+ * Copyright (C) Tom Long Nguyen (tom.l.nguyen@xxxxxxxxx)
+ */
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/pm.h>
+#include <linux/pcieport_if.h>
+
+#include "portdrv.h"
+
+extern int pcie_mch_quirk; /* MSI-quirk Indicator */
+
+extern struct device_driver pcieport_generic_driver;
+
+static int pcie_port_probe_service(struct device *dev)
+{
+ struct pcie_device *pciedev;
+ struct pcie_port_service_driver *driver;
+ int status = -ENODEV;
+
+ if (!dev || !dev->driver)
+ return status;
+
+ driver = to_service_driver(dev->driver);
+ if (!driver || !driver->probe)
+ return status;
+
+ pciedev = to_pcie_device(dev);
+ status = driver->probe(pciedev, driver->id_table);
+ if (!status) {
+ printk(KERN_DEBUG "Load service driver %s on pcie device %s\n",
+ driver->name, dev->bus_id);
+ get_device(dev);
+ }
+ return status;
+}
+
+static int pcie_port_remove_service(struct device *dev)
+{
+ struct pcie_device *pciedev;
+ struct pcie_port_service_driver *driver;
+
+ if (!dev || !dev->driver)
+ return 0;
+
+ pciedev = to_pcie_device(dev);
+ driver = to_service_driver(dev->driver);
+ if (driver && driver->remove) {
+ printk(KERN_DEBUG "Unload service driver %s on pcie device %s\n",
+ driver->name, dev->bus_id);
+ driver->remove(pciedev);
+ put_device(dev);
+ }
+ return 0;
+}
+
+static void pcie_port_shutdown_service(struct device *dev) {}
+
+static int pcie_port_suspend_service(struct device *dev, u32 state, u32 level)
+{
+ struct pcie_device *pciedev;
+ struct pcie_port_service_driver *driver;
+
+ if (!dev || !dev->driver)
+ return 0;
+
+ pciedev = to_pcie_device(dev);
+ driver = to_service_driver(dev->driver);
+ if (driver && driver->suspend)
+ driver->suspend(pciedev, state);
+ return 0;
+}
+
+static int pcie_port_resume_service(struct device *dev, u32 state)
+{
+ struct pcie_device *pciedev;
+ struct pcie_port_service_driver *driver;
+
+ if (!dev || !dev->driver)
+ return 0;
+
+ pciedev = to_pcie_device(dev);
+ driver = to_service_driver(dev->driver);
+
+ if (driver && driver->resume)
+ driver->resume(pciedev);
+ return 0;
+}
+
+/*
+ * release_pcie_device
+ *
+ * Being invoked automatically when device is being removed
+ * in response to device_unregister(dev) call.
+ * Release all resources being claimed.
+ */
+static void release_pcie_device(struct device *dev)
+{
+ kfree(to_pcie_device(dev));
+}
+
+static int is_msi_quirked(struct pci_dev *dev)
+{
+ int port_type, quirk = 0;
+ u16 reg16;
+
+ pci_read_config_word(dev,
+ pci_find_capability(dev, PCI_CAP_ID_EXP) +
+ PCIE_CAPABILITIES_REG, ®16);
+ port_type = (reg16 >> 4) & PORT_TYPE_MASK;
+ switch(port_type) {
+ case PCIE_RC_PORT:
+ if (pcie_mch_quirk == 1)
+ quirk = 1;
+ break;
+ case PCIE_SW_UPSTREAM_PORT:
+ case PCIE_SW_DOWNSTREAM_PORT:
+ default:
+ break;
+ }
+ return quirk;
+}
+
+static int assign_interrupt_mode(struct pci_dev *dev, int *vectors, int mask)
+{
+ int i, pos, nvec, status = -EINVAL;
+ int interrupt_mode = PCIE_PORT_INTx_MODE;
+
+ /* Set INTx as default */
+ for (i = 0, nvec = 0; i < PCIE_PORT_DEVICE_MAXSERVICES; i++) {
+ if (mask & (1 << i))
+ nvec++;
+ vectors[i] = dev->irq;
+ }
+
+ /* Check MSI quirk */
+ if (is_msi_quirked(dev))
+ return interrupt_mode;
+
+ /* Select MSI-X over MSI if supported */
+ pos = pci_find_capability(dev, PCI_CAP_ID_MSIX);
+ if (pos) {
+ struct msix_entry msix_entries[PCIE_PORT_DEVICE_MAXSERVICES] =
+ {{0, 0}, {0, 1}, {0, 2}, {0, 3}};
+ printk("%s Found MSIX capability\n", __FUNCTION__);
+ status = pci_enable_msix(dev, msix_entries, nvec);
+ if (!status) {
+ int j = 0;
+
+ interrupt_mode = PCIE_PORT_MSIX_MODE;
+ for (i = 0; i < PCIE_PORT_DEVICE_MAXSERVICES; i++) {
+ if (mask & (1 << i))
+ vectors[i] = msix_entries[j++].vector;
+ }
+ }
+ }
+ if (status) {
+ pos = pci_find_capability(dev, PCI_CAP_ID_MSI);
+ if (pos) {
+ printk("%s Found MSI capability\n", __FUNCTION__);
+ status = pci_enable_msi(dev);
+ if (!status) {
+ interrupt_mode = PCIE_PORT_MSI_MODE;
+ for (i = 0;i < PCIE_PORT_DEVICE_MAXSERVICES;i++)
+ vectors[i] = dev->irq;
+ }
+ }
+ }
+ return interrupt_mode;
+}
+
+static int get_port_device_capability(struct pci_dev *dev)
+{
+ int services = 0, pos;
+ u16 reg16;
+ u32 reg32;
+
+ pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
+ pci_read_config_word(dev, pos + PCIE_CAPABILITIES_REG, ®16);
+ /* Hot-Plug Capable */
+ if (reg16 & PORT_TO_SLOT_MASK) {
+ pci_read_config_dword(dev,
+ pos + PCIE_SLOT_CAPABILITIES_REG, ®32);
+ if (reg32 & SLOT_HP_CAPABLE_MASK)
+ services |= PCIE_PORT_SERVICE_HP;
+ }
+ /* PME Capable */
+ pos = pci_find_capability(dev, PCI_CAP_ID_PME);
+ if (pos)
+ services |= PCIE_PORT_SERVICE_PME;
+
+ pos = PCI_CFG_SPACE_SIZE;
+ while (pos) {
+ pci_read_config_dword(dev, pos, ®32);
+ switch (reg32 & 0xffff) {
+ case PCI_EXT_CAP_ID_ERR:
+ services |= PCIE_PORT_SERVICE_AER;
+ pos = reg32 >> 20;
+ break;
+ case PCI_EXT_CAP_ID_VC:
+ services |= PCIE_PORT_SERVICE_VC;
+ pos = reg32 >> 20;
+ break;
+ default:
+ pos = 0;
+ break;
+ }
+ }
+
+ return services;
+}
+
+static void pcie_device_init(struct pcie_device *parent,
+ struct pcie_device *dev,
+ int port_type, int service_type)
+{
+ struct device *device;
+
+ if (parent) {
+ dev->id.vendor = parent->port->vendor;
+ dev->id.device = parent->port->device;
+ dev->id.port_type = port_type;
+ dev->id.service_type = (1 << service_type);
+ }
+
+ /* Initialize generic device interface */
+ device = &dev->device;
+ memset(device, 0, sizeof(struct device));
+ INIT_LIST_HEAD(&device->node);
+ INIT_LIST_HEAD(&device->children);
+ INIT_LIST_HEAD(&device->bus_list);
+ device->bus = &pcie_port_bus_type;
+ device->driver = NULL;
+ device->driver_data = NULL;
+ device->release = release_pcie_device; /* callback to free pcie dev */
+ sprintf(&device->bus_id[0], "%s.%02x", parent->device.bus_id,
+ get_descriptor_id(port_type, service_type));
+ device->parent = ((parent == NULL) ? NULL : &parent->device);
+}
+
+static struct pcie_device* alloc_pcie_device(
+ struct pcie_device *parent, struct pci_dev *bridge,
+ int port_type, int service_type, int irq, int irq_mode)
+{
+ struct pcie_device *device;
+ static int NR_PORTS = 0;
+
+ device = kmalloc(sizeof(struct pcie_device), GFP_KERNEL);
+ if (!device)
+ return NULL;
+
+ memset(device, 0, sizeof(struct pcie_device));
+ device->port = bridge;
+ device->interrupt_mode = irq_mode;
+ device->irq = irq;
+ if (!parent) {
+ pcie_device_init(NULL, device, port_type, service_type);
+ NR_PORTS++;
+ device->device.driver = &pcieport_generic_driver;
+ sprintf(&device->device.bus_id[0], "port%d", NR_PORTS);
+ } else {
+ pcie_device_init(parent, device, port_type, service_type);
+ }
+ printk(KERN_DEBUG "Allocate Port Device[%s]\n", device->device.bus_id);
+ return device;
+}
+
+int pcie_port_device_probe(struct pci_dev *dev)
+{
+ int pos, type;
+ u16 reg;
+
+ if (!(pos = pci_find_capability(dev, PCI_CAP_ID_EXP)))
+ return -ENODEV;
+
+ pci_read_config_word(dev, pos + PCIE_CAPABILITIES_REG, ®);
+ type = (reg >> 4) & PORT_TYPE_MASK;
+ if ( type == PCIE_RC_PORT || type == PCIE_SW_UPSTREAM_PORT ||
+ type == PCIE_SW_DOWNSTREAM_PORT )
+ return 0;
+
+ return -ENODEV;
+}
+
+int pcie_port_device_register(struct pci_dev *dev)
+{
+ struct pcie_device *parent;
+ int status, type, capabilities, irq_mode, i;
+ int vectors[PCIE_PORT_DEVICE_MAXSERVICES];
+ u16 reg16;
+
+ /* Get port type */
+ pci_read_config_word(dev,
+ pci_find_capability(dev, PCI_CAP_ID_EXP) +
+ PCIE_CAPABILITIES_REG, ®16);
+ type = (reg16 >> 4) & PORT_TYPE_MASK;
+
+ /* Now get port services */
+ capabilities = get_port_device_capability(dev);
+ irq_mode = assign_interrupt_mode(dev, vectors, capabilities);
+
+ /* Allocate parent */
+ parent = alloc_pcie_device(NULL, dev, type, 0, dev->irq, irq_mode);
+ if (!parent)
+ return -ENOMEM;
+
+ status = device_register(&parent->device);
+ if (status) {
+ kfree(parent);
+ return status;
+ }
+ get_device(&parent->device);
+ pci_set_drvdata(dev, parent);
+
+ /* Allocate child services if any */
+ for (i = 0; i < PCIE_PORT_DEVICE_MAXSERVICES; i++) {
+ struct pcie_device *child;
+
+ if (capabilities & (1 << i)) {
+ child = alloc_pcie_device(
+ parent, /* parent */
+ dev, /* Root/Upstream/Downstream */
+ type, /* port type */
+ i, /* service type */
+ vectors[i], /* irq */
+ irq_mode /* interrupt mode */);
+ if (child) {
+ status = device_register(&child->device);
+ if (status) {
+ kfree(child);
+ continue;
+ }
+ get_device(&child->device);
+ }
+ }
+ }
+ return 0;
+}
+
+#ifdef CONFIG_PM
+int pcie_port_device_suspend(struct pcie_device *dev, u32 state)
+{
+ struct list_head *head;
+ struct device *parent, *child;
+ struct device_driver *driver;
+ struct pcie_port_service_driver *service_driver;
+
+ parent = &dev->device;
+ head = &parent->children;
+ while (!list_empty(head)) {
+ child = container_of(head->next, struct device, node);
+ driver = child->driver;
+ if (!driver)
+ continue;
+ service_driver = to_service_driver(driver);
+ if (service_driver->suspend)
+ service_driver->suspend(to_pcie_device(child), state);
+ }
+ return 0;
+}
+
+int pcie_port_device_resume(struct pcie_device *dev)
+{
+ struct list_head *head;
+ struct device *parent, *child;
+ struct device_driver *driver;
+ struct pcie_port_service_driver *service_driver;
+
+ parent = &dev->device;
+ head = &parent->children;
+ while (!list_empty(head)) {
+ child = container_of(head->next, struct device, node);
+ driver = child->driver;
+ if (!driver)
+ continue;
+ service_driver = to_service_driver(driver);
+ if (service_driver->resume)
+ service_driver->resume(to_pcie_device(child));
+ }
+ return 0;
+
+}
+#endif
+
+void pcie_port_device_remove(struct pcie_device *dev)
+{
+ struct list_head *head;
+ struct device *parent, *child;
+ struct device_driver *driver;
+ struct pcie_port_service_driver *service_driver;
+
+ parent = &dev->device;
+ head = &parent->children;
+ while (!list_empty(head)) {
+ child = container_of(head->next, struct device, node);
+ driver = child->driver;
+ if (driver) {
+ service_driver = to_service_driver(driver);
+ if (service_driver->remove)
+ service_driver->remove(to_pcie_device(child));
+ }
+ put_device(child);
+ device_unregister(child);
+ }
+
+ /* Switch to INTx by default if MSI enabled */
+ if (dev->interrupt_mode == PCIE_PORT_MSIX_MODE)
+ pci_disable_msix(dev->port);
+ else if (dev->interrupt_mode == PCIE_PORT_MSI_MODE)
+ pci_disable_msi(dev->port);
+ put_device(parent);
+ device_unregister(parent);
+}
+
+void pcie_port_bus_register(void)
+{
+ bus_register(&pcie_port_bus_type);
+ driver_register(&pcieport_generic_driver);
+}
+
+void pcie_port_bus_unregister(void)
+{
+ driver_unregister(&pcieport_generic_driver);
+ bus_unregister(&pcie_port_bus_type);
+}
+
+int pcie_port_service_register(struct pcie_port_service_driver *new)
+{
+ new->driver.name = (char *)new->name;
+ new->driver.bus = &pcie_port_bus_type;
+ new->driver.probe = pcie_port_probe_service;
+ new->driver.remove = pcie_port_remove_service;
+ new->driver.shutdown = pcie_port_shutdown_service;
+ new->driver.suspend = pcie_port_suspend_service;
+ new->driver.resume = pcie_port_resume_service;
+
+ return driver_register(&new->driver);
+}
+
+void pcie_port_service_unregister(struct pcie_port_service_driver *new)
+{
+ driver_unregister(&new->driver);
+}
+
+EXPORT_SYMBOL(pcie_port_service_register);
+EXPORT_SYMBOL(pcie_port_service_unregister);
diff -urpN linux-2.6.10-rc3/drivers/pcieport/portdrv.h patch-2.6.10-rc3-pbdhp/drivers/pcieport/portdrv.h
--- linux-2.6.10-rc3/drivers/pcieport/portdrv.h 1969-12-31 19:00:00.000000000 -0500
+++ patch-2.6.10-rc3-pbdhp/drivers/pcieport/portdrv.h 2004-12-10 15:17:31.000000000 -0500
@@ -0,0 +1,42 @@
+/*
+ * File: portdrv.h
+ * Purpose: PCI Express Port Bus Driver's Internal Data Structures
+ *
+ * Copyright (C) 2004 Intel
+ * Copyright (C) Tom Long Nguyen (tom.l.nguyen@xxxxxxxxx)
+ */
+
+#ifndef _PORTDRV_H_
+#define _PORTDRV_H_
+
+#if !defined(PCI_CAP_ID_PME)
+#define PCI_CAP_ID_PME 1
+#endif
+
+#if !defined(PCI_CAP_ID_EXP)
+#define PCI_CAP_ID_EXP 0x10
+#endif
+
+#define PORT_TYPE_MASK 0xf
+#define PORT_TO_SLOT_MASK 0x100
+#define SLOT_HP_CAPABLE_MASK 0x40
+#define PCIE_CAPABILITIES_REG 0x2
+#define PCIE_SLOT_CAPABILITIES_REG 0x14
+#define PCIE_PORT_DEVICE_MAXSERVICES 4
+#define PCI_CFG_SPACE_SIZE 256
+
+#define get_descriptor_id(type, service) (((type - 4) << 4) | service)
+
+extern struct bus_type pcie_port_bus_type;
+extern struct device_driver pcieport_generic_driver;
+extern int pcie_port_device_probe(struct pci_dev *dev);
+extern int pcie_port_device_register(struct pci_dev *dev);
+#ifdef CONFIG_PM
+extern int pcie_port_device_suspend(struct pcie_device *dev, u32 state);
+extern int pcie_port_device_resume(struct pcie_device *dev);
+#endif
+extern void pcie_port_device_remove(struct pcie_device *dev);
+extern void pcie_port_bus_register(void);
+extern void pcie_port_bus_unregister(void);
+
+#endif /* _PORTDRV_H_ */
diff -urpN linux-2.6.10-rc3/drivers/pcieport/portdrv_pci.c patch-2.6.10-rc3-pbdhp/drivers/pcieport/portdrv_pci.c
--- linux-2.6.10-rc3/drivers/pcieport/portdrv_pci.c 1969-12-31 19:00:00.000000000 -0500
+++ patch-2.6.10-rc3-pbdhp/drivers/pcieport/portdrv_pci.c 2004-12-10 15:31:35.000000000 -0500
@@ -0,0 +1,138 @@
+/*
+ * File: portdrv_pci.c
+ * Purpose: PCI Express Port Bus Driver
+ *
+ * Copyright (C) 2004 Intel
+ * Copyright (C) Tom Long Nguyen (tom.l.nguyen@xxxxxxxxx)
+ */
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/pm.h>
+#include <linux/init.h>
+#include <linux/pcieport_if.h>
+
+#include "portdrv.h"
+
+/*
+ * Version Information
+ */
+#define DRIVER_VERSION "v1.0"
+#define DRIVER_AUTHOR "tom.l.nguyen@xxxxxxxxx"
+#define DRIVER_DESC "PCIE Port Bus Driver"
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+/* global data */
+static const char device_name[] = "pcieport-driver";
+
+/*
+ * pcie_portdrv_probe - Probe PCI-Express port devices
+ * @dev: PCI-Express port device being probed
+ *
+ * If detected invokes the pcie_port_device_register() method for
+ * this port device.
+ *
+ */
+static int __devinit pcie_portdrv_probe (struct pci_dev *dev,
+ const struct pci_device_id *id )
+{
+ int status;
+
+ status = pcie_port_device_probe(dev);
+ if (status)
+ return status;
+
+ if (pci_enable_device(dev) < 0)
+ return -ENODEV;
+
+ pci_set_master(dev);
+ if (!dev->irq) {
+ printk(KERN_WARNING
+ "%s->Dev[%04x:%04x] has invalid IRQ. Check vendor BIOS\n",
+ __FUNCTION__, dev->device, dev->vendor);
+ }
+ if (pcie_port_device_register(dev))
+ return -ENOMEM;
+
+ return 0;
+}
+
+static void pcie_portdrv_remove (struct pci_dev *dev)
+{
+ struct pcie_device *pciedev;
+
+ pciedev = (struct pcie_device *)pci_get_drvdata(dev);
+ if (pciedev) {
+ pcie_port_device_remove(pciedev);
+ pci_set_drvdata(dev, NULL);
+ }
+}
+
+#ifdef CONFIG_PM
+static int pcie_portdrv_suspend (struct pci_dev *dev, u32 state)
+{
+ struct pcie_device *pciedev;
+
+ pciedev = (struct pcie_device *)pci_get_drvdata(dev);
+ if (pciedev)
+ pcie_port_device_suspend(pciedev, state);
+ return 0;
+}
+
+static int pcie_portdrv_resume (struct pci_dev *dev)
+{
+ struct pcie_device *pciedev;
+
+ pciedev = (struct pcie_device *)pci_get_drvdata(dev);
+ if (pciedev)
+ pcie_port_device_resume(pciedev);
+ return 0;
+}
+#endif
+
+/*
+ * LINUX Device Driver Model
+ */
+static const struct pci_device_id port_pci_ids[] = { {
+ /* handle any PCI-Express port */
+ PCI_DEVICE_CLASS(((PCI_CLASS_BRIDGE_PCI << 8) | 0x00), ~0),
+ }, { /* end: all zeroes */ }
+};
+MODULE_DEVICE_TABLE(pci, port_pci_ids);
+
+static struct pci_driver pcie_portdrv = {
+ .name = (char *)device_name,
+ .id_table = &port_pci_ids[0],
+
+ .probe = pcie_portdrv_probe,
+ .remove = pcie_portdrv_remove,
+
+#ifdef CONFIG_PM
+ .suspend = pcie_portdrv_suspend,
+ .resume = pcie_portdrv_resume,
+#endif /* PM */
+};
+
+static int __init pcie_portdrv_init(void)
+{
+ int retval = 0;
+
+ pcie_port_bus_register();
+ retval = pci_module_init(&pcie_portdrv);
+ if (retval)
+ pcie_port_bus_unregister();
+ return retval;
+}
+
+static void __exit pcie_portdrv_exit(void)
+{
+ pci_unregister_driver(&pcie_portdrv);
+ pcie_port_bus_unregister();
+}
+
+module_init(pcie_portdrv_init);
+module_exit(pcie_portdrv_exit);
diff -urpN linux-2.6.10-rc3/include/linux/pcieport_if.h patch-2.6.10-rc3-pbdhp/include/linux/pcieport_if.h
--- linux-2.6.10-rc3/include/linux/pcieport_if.h 1969-12-31 19:00:00.000000000 -0500
+++ patch-2.6.10-rc3-pbdhp/include/linux/pcieport_if.h 2004-12-10 14:06:05.000000000 -0500
@@ -0,0 +1,74 @@
+/*
+ * File: pcieport_if.h
+ * Purpose: PCI Express Port Bus Driver's IF Data Structure
+ *
+ * Copyright (C) 2004 Intel
+ * Copyright (C) Tom Long Nguyen (tom.l.nguyen@xxxxxxxxx)
+ */
+
+#ifndef _PCIEPORT_IF_H_
+#define _PCIEPORT_IF_H_
+
+/* Port Type */
+#define PCIE_RC_PORT 4 /* Root port of RC */
+#define PCIE_SW_UPSTREAM_PORT 5 /* Upstream port of Switch */
+#define PCIE_SW_DOWNSTREAM_PORT 6 /* Downstream port of Switch */
+#define PCIE_ANY_PORT 7
+
+/* Service Type */
+#define PCIE_PORT_SERVICE_PME 1 /* Power Management Event */
+#define PCIE_PORT_SERVICE_AER 2 /* Advanced Error Reporting */
+#define PCIE_PORT_SERVICE_HP 4 /* Native Hotplug */
+#define PCIE_PORT_SERVICE_VC 8 /* Virtual Channel */
+
+/* Root/Upstream/Downstream Port's Interrupt Mode */
+#define PCIE_PORT_INTx_MODE 0
+#define PCIE_PORT_MSI_MODE 1
+#define PCIE_PORT_MSIX_MODE 2
+
+struct pcie_port_service_id {
+ __u32 vendor, device; /* Vendor and device ID or PCI_ANY_ID*/
+ __u32 subvendor, subdevice; /* Subsystem ID's or PCI_ANY_ID */
+ __u32 class, class_mask; /* (class,subclass,prog-if) triplet */
+ __u32 port_type, service_type; /* Port Entity */
+ kernel_ulong_t driver_data;
+};
+
+struct pcie_device {
+ int irq; /* Service IRQ/MSI/MSI-X Vector */
+ int interrupt_mode; /* [0:INTx | 1:MSI | 2:MSI-X] */
+ struct pcie_port_service_id id; /* Service ID */
+ struct pci_dev *port; /* Root/Upstream/Downstream Port */
+ void *priv_data; /* Service Private Data */
+ struct device device; /* Generic Device Interface */
+};
+#define to_pcie_device(d) container_of(d, struct pcie_device, device)
+
+static inline void set_service_data(struct pcie_device *dev, void *data)
+{
+ dev->priv_data = data;
+}
+
+static inline void* get_service_data(struct pcie_device *dev)
+{
+ return dev->priv_data;
+}
+
+struct pcie_port_service_driver {
+ const char *name;
+ int (*probe) (struct pcie_device *dev,
+ const struct pcie_port_service_id *id);
+ void (*remove) (struct pcie_device *dev);
+ int (*suspend) (struct pcie_device *dev, u32 state);
+ int (*resume) (struct pcie_device *dev);
+
+ const struct pcie_port_service_id *id_table;
+ struct device_driver driver;
+};
+#define to_service_driver(d) \
+ container_of(d, struct pcie_port_service_driver, driver)
+
+extern int pcie_port_service_register(struct pcie_port_service_driver *new);
+extern void pcie_port_service_unregister(struct pcie_port_service_driver *new);
+
+#endif /* _PCIEPORT_IF_H_ */
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/