RAID1 Software and SII3114 trouble

[Froggy / Froggy Corp.]

Hi,

	I install a debian with kernel 2.6.9 and two HD using raid 1 software.
All partition are under raid software.
	I getting trouble when i reboot the linux with error of read/write :

ata4: command 0x35 timeout, stat 0xd8 host_stat 0x1
ata4: status=0xd8 { Busy }
SCSI error : <4 0 0 0> return code = 0x8000002
Current sdb: sense 70 10
Raw sens data :0x70 0x00 0x10 0X00 0X00 0X00 0X00 0X0a 0X00 0X00 0X00
0X00 0X00 0X00 0X00 0X00 0X00 0X00
end_request: I/O error, dev sdb, sector 226864909
ATA: abnormal status 0xD8 on port 0XF88022C7
ATA: abnormal status 0xD8 on port 0XF88022C7
ATA: abnormal status 0xD8 on port 0XF88022C7
	
	The server will not freeze, but no disk access can be made.

	I scan sdb with mkfs to search bad sector but find nothing. I dont get
any message when i am under degraded array and i think that if a HD have
some problem, dmadm will put it under fault.

	My configuration is a Tyan i7210 with SII3114 SATA RAID Chipset and the
two HD are both  Seage SATA 120Go.


Thx in advance for support,
Regards,
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/