[ide-dev 4/5] fix some rare ide-default vs ide-disk races
From: Bartlomiej Zolnierkiewicz
Date: Fri Jan 21 2005 - 18:28:53 EST
Some rare races between ide-default and ide-disk are possible, i.e.:
* ide-default is used, I/O request is triggered (ie. /proc/ide/hd?/identify),
drive->special is cleared silently (so CHS is not initialized properly),
ide-disk is loaded and fails if drive uses CHS
* ide-disk is used, drive is resetted, ide-disk is unloaded, ide-default
takes control over drive and on the first I/O request silently clears
drive->special without restoring settings
Fix them by moving idedisk_{special,pre_reset}() and company to IDE core.
diff -Nru a/drivers/ide/Kconfig b/drivers/ide/Kconfig
--- a/drivers/ide/Kconfig 2005-01-21 23:53:42 +01:00
+++ b/drivers/ide/Kconfig 2005-01-21 23:53:42 +01:00
@@ -150,7 +150,6 @@
config IDEDISK_MULTI_MODE
bool "Use multi-mode by default"
- depends on BLK_DEV_IDEDISK
help
If you get this error, try to say Y here:
diff -Nru a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c
--- a/drivers/ide/ide-disk.c 2005-01-21 23:53:42 +01:00
+++ b/drivers/ide/ide-disk.c 2005-01-21 23:53:42 +01:00
@@ -517,75 +517,6 @@
return drive->capacity64 - drive->sect0;
}
-#define IS_PDC4030_DRIVE 0
-
-static ide_startstop_t idedisk_special (ide_drive_t *drive)
-{
- special_t *s = &drive->special;
-
- if (s->b.set_geometry) {
- s->b.set_geometry = 0;
- if (!IS_PDC4030_DRIVE) {
- ide_task_t args;
- memset(&args, 0, sizeof(ide_task_t));
- args.tfRegister[IDE_NSECTOR_OFFSET] = drive->sect;
- args.tfRegister[IDE_SECTOR_OFFSET] = drive->sect;
- args.tfRegister[IDE_LCYL_OFFSET] = drive->cyl;
- args.tfRegister[IDE_HCYL_OFFSET] = drive->cyl>>8;
- args.tfRegister[IDE_SELECT_OFFSET] = ((drive->head-1)|drive->select.all)&0xBF;
- args.tfRegister[IDE_COMMAND_OFFSET] = WIN_SPECIFY;
- args.command_type = IDE_DRIVE_TASK_NO_DATA;
- args.handler = &set_geometry_intr;
- do_rw_taskfile(drive, &args);
- }
- } else if (s->b.recalibrate) {
- s->b.recalibrate = 0;
- if (!IS_PDC4030_DRIVE) {
- ide_task_t args;
- memset(&args, 0, sizeof(ide_task_t));
- args.tfRegister[IDE_NSECTOR_OFFSET] = drive->sect;
- args.tfRegister[IDE_COMMAND_OFFSET] = WIN_RESTORE;
- args.command_type = IDE_DRIVE_TASK_NO_DATA;
- args.handler = &recal_intr;
- do_rw_taskfile(drive, &args);
- }
- } else if (s->b.set_multmode) {
- s->b.set_multmode = 0;
- if (drive->mult_req > drive->id->max_multsect)
- drive->mult_req = drive->id->max_multsect;
- if (!IS_PDC4030_DRIVE) {
- ide_task_t args;
- memset(&args, 0, sizeof(ide_task_t));
- args.tfRegister[IDE_NSECTOR_OFFSET] = drive->mult_req;
- args.tfRegister[IDE_COMMAND_OFFSET] = WIN_SETMULT;
- args.command_type = IDE_DRIVE_TASK_NO_DATA;
- args.handler = &set_multmode_intr;
- do_rw_taskfile(drive, &args);
- }
- } else if (s->all) {
- int special = s->all;
- s->all = 0;
- printk(KERN_ERR "%s: bad special flag: 0x%02x\n", drive->name, special);
- return ide_stopped;
- }
- return IS_PDC4030_DRIVE ? ide_stopped : ide_started;
-}
-
-static void idedisk_pre_reset (ide_drive_t *drive)
-{
- int legacy = (drive->id->cfs_enable_2 & 0x0400) ? 0 : 1;
-
- drive->special.all = 0;
- drive->special.b.set_geometry = legacy;
- drive->special.b.recalibrate = legacy;
- if (OK_TO_RESET_CONTROLLER)
- drive->mult_count = 0;
- if (!drive->keep_settings && !drive->using_dma)
- drive->mult_req = 0;
- if (drive->mult_req != drive->mult_count)
- drive->special.b.set_multmode = 1;
-}
-
#ifdef CONFIG_PROC_FS
static int smart_enable(ide_drive_t *drive)
@@ -893,28 +824,6 @@
printk(KERN_INFO "%s: max request size: %dKiB\n", drive->name, drive->queue->max_sectors / 2);
- /* Extract geometry if we did not already have one for the drive */
- if (!drive->cyl || !drive->head || !drive->sect) {
- drive->cyl = drive->bios_cyl = id->cyls;
- drive->head = drive->bios_head = id->heads;
- drive->sect = drive->bios_sect = id->sectors;
- }
-
- /* Handle logical geometry translation by the drive */
- if ((id->field_valid & 1) && id->cur_cyls &&
- id->cur_heads && (id->cur_heads <= 16) && id->cur_sectors) {
- drive->cyl = id->cur_cyls;
- drive->head = id->cur_heads;
- drive->sect = id->cur_sectors;
- }
-
- /* Use physical geometry if what we have still makes no sense */
- if (drive->head > 16 && id->heads && id->heads <= 16) {
- drive->cyl = id->cyls;
- drive->head = id->heads;
- drive->sect = id->sectors;
- }
-
/* calculate drive capacity, and select LBA if possible */
init_idedisk_capacity (drive);
@@ -978,21 +887,6 @@
ide_dma_verbose(drive);
printk("\n");
- drive->mult_count = 0;
- if (id->max_multsect) {
-#ifdef CONFIG_IDEDISK_MULTI_MODE
- id->multsect = ((id->max_multsect/2) > 1) ? id->max_multsect : 0;
- id->multsect_valid = id->multsect ? 1 : 0;
- drive->mult_req = id->multsect_valid ? id->max_multsect : INITIAL_MULT_COUNT;
- drive->special.b.set_multmode = drive->mult_req ? 1 : 0;
-#else /* original, pre IDE-NFG, per request of AC */
- drive->mult_req = INITIAL_MULT_COUNT;
- if (drive->mult_req > id->max_multsect)
- drive->mult_req = id->max_multsect;
- if (drive->mult_req || ((id->multsect_valid & 1) && id->multsect))
- drive->special.b.set_multmode = 1;
-#endif /* CONFIG_IDEDISK_MULTI_MODE */
- }
drive->no_io_32bit = id->dword_io ? 1 : 0;
/* write cache enabled? */
@@ -1091,9 +985,7 @@
.supports_dsc_overlap = 0,
.cleanup = idedisk_cleanup,
.do_request = ide_do_rw_disk,
- .pre_reset = idedisk_pre_reset,
.capacity = idedisk_capacity,
- .special = idedisk_special,
.proc = idedisk_proc,
.attach = idedisk_attach,
.drives = LIST_HEAD_INIT(idedisk_driver.drives),
diff -Nru a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
--- a/drivers/ide/ide-io.c 2005-01-21 23:53:42 +01:00
+++ b/drivers/ide/ide-io.c 2005-01-21 23:53:42 +01:00
@@ -754,6 +754,65 @@
return ide_stopped;
}
+static void ide_init_specify_cmd(ide_drive_t *drive, ide_task_t *task)
+{
+ task->tfRegister[IDE_NSECTOR_OFFSET] = drive->sect;
+ task->tfRegister[IDE_SECTOR_OFFSET] = drive->sect;
+ task->tfRegister[IDE_LCYL_OFFSET] = drive->cyl;
+ task->tfRegister[IDE_HCYL_OFFSET] = drive->cyl>>8;
+ task->tfRegister[IDE_SELECT_OFFSET] = ((drive->head-1)|drive->select.all)&0xBF;
+ task->tfRegister[IDE_COMMAND_OFFSET] = WIN_SPECIFY;
+
+ task->handler = &set_geometry_intr;
+}
+
+static void ide_init_restore_cmd(ide_drive_t *drive, ide_task_t *task)
+{
+ task->tfRegister[IDE_NSECTOR_OFFSET] = drive->sect;
+ task->tfRegister[IDE_COMMAND_OFFSET] = WIN_RESTORE;
+
+ task->handler = &recal_intr;
+}
+
+static void ide_init_setmult_cmd(ide_drive_t *drive, ide_task_t *task)
+{
+ task->tfRegister[IDE_NSECTOR_OFFSET] = drive->mult_req;
+ task->tfRegister[IDE_COMMAND_OFFSET] = WIN_SETMULT;
+
+ task->handler = &set_multmode_intr;
+}
+
+static ide_startstop_t ide_disk_special(ide_drive_t *drive)
+{
+ special_t *s = &drive->special;
+ ide_task_t args;
+
+ memset(&args, 0, sizeof(ide_task_t));
+ args.command_type = IDE_DRIVE_TASK_NO_DATA;
+
+ if (s->b.set_geometry) {
+ s->b.set_geometry = 0;
+ ide_init_specify_cmd(drive, &args);
+ } else if (s->b.recalibrate) {
+ s->b.recalibrate = 0;
+ ide_init_restore_cmd(drive, &args);
+ } else if (s->b.set_multmode) {
+ s->b.set_multmode = 0;
+ if (drive->mult_req > drive->id->max_multsect)
+ drive->mult_req = drive->id->max_multsect;
+ ide_init_setmult_cmd(drive, &args);
+ } else if (s->all) {
+ int special = s->all;
+ s->all = 0;
+ printk(KERN_ERR "%s: bad special flag: 0x%02x\n", drive->name, special);
+ return ide_stopped;
+ }
+
+ do_rw_taskfile(drive, &args);
+
+ return ide_started;
+}
+
/**
* do_special - issue some special commands
* @drive: drive the command is for
@@ -775,9 +834,14 @@
if (HWIF(drive)->tuneproc != NULL)
HWIF(drive)->tuneproc(drive, drive->tune_req);
return ide_stopped;
+ } else {
+ if (drive->media == ide_disk)
+ return ide_disk_special(drive);
+
+ s->all = 0;
+ drive->mult_req = 0;
+ return ide_stopped;
}
- else
- return DRIVER(drive)->special(drive);
}
void ide_map_sg(ide_drive_t *drive, struct request *rq)
diff -Nru a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
--- a/drivers/ide/ide-iops.c 2005-01-21 23:53:42 +01:00
+++ b/drivers/ide/ide-iops.c 2005-01-21 23:53:42 +01:00
@@ -1112,9 +1112,27 @@
#endif
}
+static void ide_disk_pre_reset(ide_drive_t *drive)
+{
+ int legacy = (drive->id->cfs_enable_2 & 0x0400) ? 0 : 1;
+
+ drive->special.all = 0;
+ drive->special.b.set_geometry = legacy;
+ drive->special.b.recalibrate = legacy;
+ if (OK_TO_RESET_CONTROLLER)
+ drive->mult_count = 0;
+ if (!drive->keep_settings && !drive->using_dma)
+ drive->mult_req = 0;
+ if (drive->mult_req != drive->mult_count)
+ drive->special.b.set_multmode = 1;
+}
+
void pre_reset (ide_drive_t *drive)
{
- DRIVER(drive)->pre_reset(drive);
+ if (drive->media == ide_disk)
+ ide_disk_pre_reset(drive);
+ else
+ drive->driver->pre_reset(drive);
if (!drive->keep_settings) {
if (drive->using_dma) {
diff -Nru a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
--- a/drivers/ide/ide-probe.c 2005-01-21 23:53:42 +01:00
+++ b/drivers/ide/ide-probe.c 2005-01-21 23:53:42 +01:00
@@ -74,7 +74,55 @@
drive->id->cur_heads = drive->head;
drive->id->cur_sectors = drive->sect;
}
-
+
+static void ide_disk_init_chs(ide_drive_t *drive)
+{
+ struct hd_driveid *id = drive->id;
+
+ /* Extract geometry if we did not already have one for the drive */
+ if (!drive->cyl || !drive->head || !drive->sect) {
+ drive->cyl = drive->bios_cyl = id->cyls;
+ drive->head = drive->bios_head = id->heads;
+ drive->sect = drive->bios_sect = id->sectors;
+ }
+
+ /* Handle logical geometry translation by the drive */
+ if ((id->field_valid & 1) && id->cur_cyls &&
+ id->cur_heads && (id->cur_heads <= 16) && id->cur_sectors) {
+ drive->cyl = id->cur_cyls;
+ drive->head = id->cur_heads;
+ drive->sect = id->cur_sectors;
+ }
+
+ /* Use physical geometry if what we have still makes no sense */
+ if (drive->head > 16 && id->heads && id->heads <= 16) {
+ drive->cyl = id->cyls;
+ drive->head = id->heads;
+ drive->sect = id->sectors;
+ }
+}
+
+static void ide_disk_init_mult_count(ide_drive_t *drive)
+{
+ struct hd_driveid *id = drive->id;
+
+ drive->mult_count = 0;
+ if (id->max_multsect) {
+#ifdef CONFIG_IDEDISK_MULTI_MODE
+ id->multsect = ((id->max_multsect/2) > 1) ? id->max_multsect : 0;
+ id->multsect_valid = id->multsect ? 1 : 0;
+ drive->mult_req = id->multsect_valid ? id->max_multsect : INITIAL_MULT_COUNT;
+ drive->special.b.set_multmode = drive->mult_req ? 1 : 0;
+#else /* original, pre IDE-NFG, per request of AC */
+ drive->mult_req = INITIAL_MULT_COUNT;
+ if (drive->mult_req > id->max_multsect)
+ drive->mult_req = id->max_multsect;
+ if (drive->mult_req || ((id->multsect_valid & 1) && id->multsect))
+ drive->special.b.set_multmode = 1;
+#endif
+ }
+}
+
/**
* drive_is_flashcard - check for compact flash
* @drive: drive to check
@@ -590,8 +638,16 @@
if(!drive->present)
return 0;
/* The drive wasn't being helpful. Add generic info only */
- if(!drive->id_read)
+ if (drive->id_read == 0) {
generic_id(drive);
+ return 1;
+ }
+
+ if (drive->media == ide_disk) {
+ ide_disk_init_chs(drive);
+ ide_disk_init_mult_count(drive);
+ }
+
return drive->present;
}
diff -Nru a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c
--- a/drivers/ide/ide-taskfile.c 2005-01-21 23:53:42 +01:00
+++ b/drivers/ide/ide-taskfile.c 2005-01-21 23:53:42 +01:00
@@ -181,8 +181,6 @@
return ide_stopped;
}
-EXPORT_SYMBOL(set_multmode_intr);
-
/*
* set_geometry_intr() is invoked on completion of a WIN_SPECIFY cmd.
*/
@@ -207,8 +205,6 @@
return ide_started;
}
-EXPORT_SYMBOL(set_geometry_intr);
-
/*
* recal_intr() is invoked on completion of a WIN_RESTORE (recalibrate) cmd.
*/
@@ -221,8 +217,6 @@
return ide_error(drive, "recal_intr", stat);
return ide_stopped;
}
-
-EXPORT_SYMBOL(recal_intr);
/*
* Handler for commands without a data phase
diff -Nru a/drivers/ide/ide.c b/drivers/ide/ide.c
--- a/drivers/ide/ide.c 2005-01-21 23:53:42 +01:00
+++ b/drivers/ide/ide.c 2005-01-21 23:53:42 +01:00
@@ -2046,15 +2046,6 @@
return 0x7fffffff;
}
-static ide_startstop_t default_special (ide_drive_t *drive)
-{
- special_t *s = &drive->special;
-
- s->all = 0;
- drive->mult_req = 0;
- return ide_stopped;
-}
-
static ide_startstop_t default_abort(ide_drive_t *drive, struct request *rq)
{
return __ide_abort(drive, rq);
@@ -2070,7 +2061,6 @@
if (d->abort == NULL) d->abort = default_abort;
if (d->pre_reset == NULL) d->pre_reset = default_pre_reset;
if (d->capacity == NULL) d->capacity = default_capacity;
- if (d->special == NULL) d->special = default_special;
}
int ide_register_subdriver(ide_drive_t *drive, ide_driver_t *driver)
diff -Nru a/include/linux/ide.h b/include/linux/ide.h
--- a/include/linux/ide.h 2005-01-21 23:53:42 +01:00
+++ b/include/linux/ide.h 2005-01-21 23:53:42 +01:00
@@ -1101,7 +1101,6 @@
int (*ioctl)(ide_drive_t *, struct inode *, struct file *, unsigned int, unsigned long);
void (*pre_reset)(ide_drive_t *);
sector_t (*capacity)(ide_drive_t *);
- ide_startstop_t (*special)(ide_drive_t *);
ide_proc_entry_t *proc;
int (*attach)(ide_drive_t *);
void (*ata_prebuilder)(ide_drive_t *);
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/